RoHS High Current Chip Inductors Dimensions: 0.098±0.008 (2.50±0.20) Inches (mm) 0.083±0.008 0.062±0.006 (1.55±0.15) 0.126±0.012 (3.20±0.30) Allied Part Number Inductance Tolerance (%) (µh) (2.10±0.20) 0.035±0.012 (0.90±0.30) 0.098±0.008 (2.50±0.20) LRC27HC Test SRF Freq. Min. (MHz,1V) (MHz) 0.051±0.008 (1.30±0.20) RDC (Ω ) +/-20% Isat (A) Irms (A) Features Marking • High Current LRC27HC-R47T-RC .47 30 1 100 0.030 3.4 2.55 R47 LRC27HC-1R0T-RC 1.0 30 1 100 0.045 2.3 2.05 1R0 LRC27HC-1R5T-RC 1.5 30 1 70 0.057 1.75 1.75 1R5 LRC27HC-2R2T-RC 2.2 30 1 70 0.076 1.55 1.60 2R2 LRC27HC-3R3T-RC 3.3 30 1 50 0.12 1.25 1.20 3R3 LRC27HC-4R7T-RC 4.7 30 1 40 0.18 1.00 1.00 4R7 LRC27HC-6R8T-RC 6.8 30 1 40 0.24 0.85 0.85 6R8 LRC27HC-100T-RC 10 30 1 30 0.38 0.75 0.70 100 LRC27HC-150T-RC 15 30 1 25 0.70 0.55 0.50 150 LRC27HC-220T-RC 22 30 1 20 0.81 0.50 0.45 220 LRC27HC-300T-RC 33 30 1 14 1.05 0.36 0.32 330 LRC27HC-470T-RC 47 30 1 11 1.48 0.28 0.24 470 • Low DC Resistance • Wide Inductance Range • Expanded Temp Range Electrical Inductance Range: .47uH ~ 47uH Tolerance: 30% over entire range, 20% available from 2.2uH to 47uH. Operating Temp. Range: i-40ºC ~+125ºC Isat Current: Based on Temperature drop of 30% typical. Irms Current: Max temp rise shall be 40ºC typical. L/Q: Test OSC @ 1V Resistance to Soldering Heat Pre-heat 150ºC, 1 minute. Solder Composition: Sn/Ag3.0/Cu0.5 All specifications subject to change without notice. Solder Temp: 260±5ºC for 10 sec Test Equipment (L): HP 4284A (RDC): CHEN HWA 502BC (Rate Current): HP4284A+HP42841A (SRF): HP4284A+HP42841A Physical (L): 2000 pieces per 7 inch reel (Marking): EIA Inductance Code 949-356-1780 ALLIED COMPONENTS INTERNATIONAL REVISED 10/06/2016 www.alliedcomponents.com