Green FTTX 1310/1490/1550 WDM (1x2) MWDMGFTTX Series Product Description Oplink’s FTTX 1310/1490/1550 WDM is based on patented athermal platform for optical device. This multiplexer features ultra low insertion loss, super thermal stability, and unparallel reliability. The technology is a lead-free packaging platform and no epoxy in the optical path. Green OADM is Telcordia GR-1221and GR-1209 tested, qualified for uncontrolled environment applications and complied with industry green initiatives such as Rohs and WEEE. Performance Specificationns MWDMGFTTX Series Min Typical Max Unit Features Pass Channel Wavelength Range λP 1260 ~ 1360, 1480 ~ 1500 nm Environmental Green Plan Compliance Reflection Channel Wavelength Range λR 1550 ~ 1560 nm Ultra-low Insertion Loss dB Narrow Down Distribution Pass Channel Insertion Loss * Reflect Channel 0.7 0.80 Standard 0.5 0.60 High Isolation 0.7 0.80 Add/Drop @ λR Isolation Express @ λP 40 Standard 30 High Isolation 45 dB Super Thermal Stability High Channel Isolation dB High Reliability dB Epoxy-free Optical Path Polarization Dependent Loss 0.20 Polarization Mode Dispersion 0.20 ps Pass Channel Ripple 0.5 dB Applications dB dB WDM System for Metro/Access Market mW FTTX Application Directivity 50 Return Loss 50 Operating Power 300 Fiber Type Corning SMF-28 Operating Temperature Storage Temperature Package Dimensions dB ** 250 μm Bare Fiber 900 μm Loose Tube 0 to +70 °C -40 to +85 °C P1: (ø) 5.5 x (L) 34.0 P2: (ø) 5.5 x (L) 40.0 mm Note: * Values are referenced without connector loss. ** The mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom specified. *** The maximum IL is under all states of polarization and within the full operating temperature and wavelength ranges specified. R05.20081117 Green FTTX 1310/1490/1550 WDM (1X2) MWDMGFTTX Series Mechanical Drawing / Package Dimensions (dimension in mm) P1: 250 µm bare fiber 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com P2: 900 µm loose tube Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. MWDMG F T T X 0 Isolation Grade Fiber Length* High isolation = H Standard = S 0.5 meter = H 1.0 meter = 1 1.5 meters = 5 2.0 meters = 2 Package & Fiber Jacket P1 + 250 μm bare fiber = 11 P2 + 900 μm loose tube = 22 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC = 9 MU = A * The tolerance of fiber length is +/-0.1m. 1 meter is standard. The lead-time for special fiber length will be longer. R05.20081117 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Transmission Interconnect RGB Laser Modules