Filter Coils < Pin Type: FB Series> Type: FB-10D ◆ Product Description ・11.0×11.0 mm Max.(L×W), 16.0mm Max. Height. ・Operating frequency:250kHz Max. ・In addition to the reference versions of parameters shown here, custom designs are available to meet your exact requirements. ◆ Feature ・Variable shielded type with 2 built-in capacitors ・Ideally used as Audio Filters(LPF, BPF, Delay Line) ・RoHS Compliance +1.0 3.5‑0.5 1 5 . 5 ± 0. 5 1 0. 5 ± 0 . 5 7.0 ±0. 2 1 0. 5 ±0. 5 +0. 1 φ0 .7 ‑0 .0 5 ◆ Dimensions (mm) 7 .0 ± 0. 2 ＊ Dimension does not include solder used on coil. ＊ Pin pitch should be measured at the root of terminal. ◆ Testing Circuit R1 Ri n ③ Rg ④ R ou t E.V.M. ② 〜 ① ⑥ E.V.M. Indicate Level 0.775V=0dB(at1KHz) R g=50Ω;R in=R g＋R1=300Ω Rout=7.5kΩ; Please refer to the sales offices on our website for a representative near you www.sumida.com 1/1 Filter Coils < Pin Type: FB Series> Type: FB-10D ◆ Specification (part number: 5332-T011) Specification Item Input impedance Output impedance (R in) (Rout) Cut Off Frequency Insertion Loss 7.5kΩ 94KHz Center Frequency Attenuation 330Ω 74KHz MIN.6.0dB 114KHz MIN.4.0 dB (-3dB) 15kHz (TYP.) 94KHz 7.4dB(TYP.) Frequency Response (Attenuation 0dB at 1KHz) Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2