Production specification SUPER FAST RECTIFIERS MUR1620DC-MUR1660DC FEATURES z Low cost. z Diffused junction. z Low forward voltage drop. z High currnt capability. z Easily cleaned with Alcohol,Isopropanol and similar solvents. z The plastic material carries U/L recognition 94V-0. Pb Lead-free TO-252 MAXIMUM RATING operating temperature range applies unless otherwise specified MUR 1620DC MUR 1640DC MUR 1660DC Recurrent Peak Reverse Voltage 200 400 600 V VRMS RMS Voltage 140 280 420 V VDC DC Blocking Voltage 200 400 600 V IF(AV) Average Forward Rectified Current @TA=100℃ IFSM Peak Forward SurgeCurrent 8.3ms Single Half Sine-wave Superimosed on Rated Load RθJA Typical thermal resistance Tj Tstg Operating Junction and Storage Temperature Range Symbol Parameter VRRM per leg total device Unit 8.0 10 A 100 A 3.0 2.0 ℃/W ℃ -55 to +175 ELECTRICAL CHARACTERISTICS@ Ta=25℃ unless otherwise specified MAX MUR 1640DC 1.3 1.0 Parameter Symbol Test conditions Forward Voltage VF (Note1) IF=8A,TA=25℃ IF=8A,TA=150℃ Reverse Current IR VR=VRRM,TA=25℃ VR=VRRM,TA=150℃ 5.0 250 10 500 µA Reverse Recover Time trr IF=0.5A,IR=1A,Irr=0.25A 25 50 ns MUR 1620DC 0.975 0.895 MUR 1660DC 1.5 1.2 UNIT V Note:1.Pulse test:pulse width=300us,duty cycle≤2.0%. W063 Rev.A www.gmicroelec.com 1 Production specification SUPER FAST RECTIFIERS MUR1620DC-MUR1660DC TYPICAL CHARACTERISTICS @ Ta=25℃ unless otherwise specified W063 Rev.A www.gmicroelec.com 2 Production specification SUPER FAST RECTIFIERS MUR1620DC-MUR1660DC PACKAGE OUTLINE Plastic surface mounted package TO-252 TO-252 C D K 4.95 5.59 B 5.40 6.63 C 6.05 7.10 D 2.20 2.40 E 0.40 0.61 F 8.80 10.60 J F B G A A G H I E 5.35 Typ. H 1.98 2.59 I 0.50 0.90 J 0.50 1.20 K 0.45 0.89 All Dimensions in mm SOLDERING FOOTPRINT W063 Rev.A 2.70 1.50 6.80 6.40 1.80 2.30 2.30 Unit:mm www.gmicroelec.com 3 Production specification SUPER FAST RECTIFIERS PACKAGE MUR1620DC-MUR1660DC INFORMATION Device Package Shipping 80PCS/Tube MUR1620DC-MUR1660DC TO-252 2500PCS/Tape&Reel W063 Rev.A www.gmicroelec.com 4