05165 ET720 STEERING DIODE ARRAY APPLICATIONS ✔ Ethernet - 10/100/1000 Base T ✔ Cellular Phones ✔ Handheld Electronics ✔ FireWire ✔ USB Interface IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 12A, 8/20µs Level 1 (Line-Ground) & Level 2 (Line-Line) SO-16 F E AT U R E S ✔ ✔ ✔ ✔ ✔ ESD Protection > 40 kilovolts Provides 14 Lines of Protection Low Leakage Current < 20nA Ultra Low Capacitance: 3pF Typical RoHS Compliant MECHANICAL CHARACTERISTICS ✔ ✔ ✔ ✔ Molded JEDEC SO-16 Package Weight 0.15 grams (Approximate) Available in Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ 16mm Tape and Reel per EIA Standard 481 ✔ Marking: Logo, Part Number, Date Code & Pin One Defined By Dot on Top of Package PIN CONFIGURATION 05165.R5 2/07 VCC VIO VI/O VI/O VI/O VI/O VI/O VI/O 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 VI/O VI/O VI/O VI/O VI/O VI/O VI/O GND 1 www.protekdevices.com ET720 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS TA -55 to 150 °C Storage Temperature TSTG -55 to 150 °C Continuous Power Dissipation PPC 145 mW PARAMETER Operating Temperature ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER ET720 DEVICE MARKING ET720 MAXIMUM PEAK PULSE FORWARD CURRENT MAXIMUM REVERSE LEAKAGE CURRENT MAXIMUM QUIESCENT SUPPLY CURRENT TYPICAL CAPACITANCE (See Note 2) VRRM VOLTS 8/20µs @1A VF VOLTS 8/20µs IFM AMPS VRRM @ 20V IR nA @20V IRQ nA @0V, 1MHz Cj pF 30 2 12 20 200 3 REPETITIVE PEAK REVERSE VOLTAGE (See Note 1) TYPICAL FORWARD VOLTAGE @ 25°C Unless Otherwise Specified Note 1: VRRM is +VCC for pin 16, -VEE for pin 1. Note 2: Measure Cj between any VI/O pins to ground and divide by 2. FIGURE 1 NON-REPETITIVE PEAK PULSE CURRENT CAPABILITY 120 IPP - Peak Pulse Current - % of IPP Peak Pulse Current - Amps 8 6 4 2 0 0.001 05165.R5 2/07 FIGURE 2 PULSE WAVE FORM tf 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t I /2 PP 20 0 0.01 0.1 1 Square Wave Pulse - ms 10 100 2 0 5 10 15 t - Time - µs 20 25 30 www.protekdevices.com ET720 GRAPHS Forward Current - mA 200 160 FIGURE 3 TYPICAL LOW CURRENT FORWARD VOLTAGE DROP TA = 25°C SINGLE PULSE See Figure 2 120 80 40 0 600 5 Forward Current - A 4 800 1,000 Forward Voltage Drop - mV 1,200 FIGURE 4 TYPICAL HIGH CURRENT FORWARD VOLTAGE DROP TA = 25°C SINGLE PULSE See Figure 2 3 2 1 0 0 05165.R5 2/07 1 2 Forward Voltage Drop - V 3 3 www.protekdevices.com ET720 SO-16 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SO-16 -A- 9 16 PACKAGE DIMENSIONS -B- P 1 0.010” (0.25 MM) M B M 8 PL 8 DIM G A B C D F G J K P R R X 45º C 0º - 7º -TK 16 PL M F D J MILLIMETERS MIN MAX 9.80 3.80 1.35 0.35 0.40 1.27 BSC 0.19 0.10 5.80 0.25 INCHES MIN MAX 10.00 0.386 0.393 0.150 0.157 4.00 1.75 0.054 0.068 0.49 0.014 0.019 0.049 1.25 0.016 1.27 BSC 0.05 BSC 0.05 BSC 0.25 0.008 0.009 0.004 0.009 0.25 6.20 0.229 0.244 0.019 0.50 0.010 NOTES 0.010” (0.25 MM) M T B S A S MOUNTING PAD 0.050” TYP 0.030” ± 0.005” 1. 2. 3. 4. 5. 6. - T - = Seating Plane and Datum Surface. Dimensions “A” and “B” are Datum. Dimensions “A” and “B” do not include mold protrusion. Maximum mold protrusion is 0.015” (0.380 mm) per side. Dimensioning and tolerances per ANSI Y14.5M, 1982. Dimensions are exclusive of mold flash and metal burrs. TAPE & REEL/BULK ORDERING NOMENCLATURE 0.160” ± 0.005” 1. 2. 3. 4. 5. 0.245” MIN Surface mount product is taped and reeled in accordance with EIA-481. Suffix-T7 = 7 Inch Reel - 1,000 pieces per 16mm tape, i.e. ET720-T7. Suffix-T13 = 13 Inch Reel - 2,500 pieces per 16mm tape, i.e. ET720-T13. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e. ET720-LF-T7. No Suffix = Product Shipped in Tubes of 48 pcs per Tube. 0.045” ± 0.005” Outline & Dimensions: Rev 1 - 11/01, 06007 COPYRIGHT © ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05165.R5 2/07 4 ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com www.protekdevices.com