November 2012 NXP Microcontrollers Selection Guide NXP LPC family of microcontrollers is changing the landscape for embedded applications. Featuring award-winning innovations in connectivity, flexibility, level of Integration, packaging, performance, power consumption, security, ease-of-use, and more, NXP’s LPC family provides developers a scalable continuum of 32-bit ARM based microcontrollers with both software and hardware reusability and portability. NXP’s microcontrollers include the latest 32-bit Cortex-M0, Cortex-M3, and Cortex-M4 based product cores and deliver high performance, low power consumption, and many peripheral options. Surrounded by a rapidly growing eco-system of tools, community and support, LPC product are designed to help you easily transition from concept to production. LPC Go NXP’s LPC Go microcontrollers feature unprecedented performance, simplicity, and low-power. These products, based on 32-bit ARM cores, are the most cost effective series compared to 8/16-bit solutions and provide a dramatic reduction in code size for every application. LPC Go products can reduce your system cost and power consumption and are easy to use providing faster time-tomarket. This category includes Cortex-M0, Cortex-M3 and ARM7 based microcontrollers. LPC811 8 2 4** 1 4* 2 1 1 1 14 30 1.8 - 3.6 F TSSOP16 On-chip APIs (USART, I2C, power profile), 1k Byte Flash sector, 64 page erase/program, Switch Matrix, GPIO-Single cycle I/O access, pattern matching engine , I/O 5V tolerant LPC812 16 4 4** 1 4* 3 1 2 1 14 30 1.8 - 3.6 F TSSOP16 On-chip APIs (USART, I2C, power profile), 1k Byte Flash sector, 64 page erase/program, Switch Matrix, GPIO-Single cycle I/O access, pattern matching engine , I/O 5V tolerant LPC812 16 4 4** 1 4* 2 1 1 1 18 30 1.8 - 3.6 F SO20 On-chip APIs (USART, I2C, power profile), 1k Byte Flash sector, 64 page erase/program, Switch Matrix, GPIO-Single cycle I/O access, pattern matching engine , I/O 5V tolerant LPC812 16 4 4** 1 4* 3 1 2 1 18 30 1.8 - 3.6 F TSSOP20 On-chip APIs (USART, I2C, power profile), 1k Byte Flash sector, 64 page erase/program, Switch Matrix, GPIO-Single cycle I/O access, pattern matching engine , I/O 5V tolerant 8 8 8 5 5 5 9** 9** 11** 1 1 1 4-8 5 11** 1 Temp. range options CPU Voltage (V) On-chip APIs (USART, I2C, power profile), 1k Byte Flash sector, 64 page erase/program, Switch Matrix, GPIO-Single cycle I/O access, pattern matching engine , I/O 5V tolerant I/O voltage (V) Max freq. (MHz) DIP8 RTC F External bus interface 1.8 - 3.6 I/O pins 30 SD/MMC 6 LCD controller 1 Comparator 1 DAC (10-bit) channels 1 ADC channels/ resolution 2 I2S 4* SSP/SPI 1 SPIFI I2C 4** CAN UART 1 USB 4 Ethernet PWM channels++ LPC810 Type EEPROM (KB) State config timer Analog Standard Timers+ Serial Interfaces RAM (KB) Timers Flash (KB) Memory Package Comment/Special features LPC800 devices LPC1100XL devices LPC1102 32 LPC1104 32 LPC1115 64 LPC1114 32 1 1 1 2 5/10 b 5/10 b 8/10 b 11 13 42 50 50 50 3.3 3.3 3.3 F F F WLCSP16 WLCSP16 LQFP48 2.17 x 2.32 x 0.6 mm miniture package size 2.17 x 2.32 x 0.6 mm miniature package size 64K Flash version of the LPC1114 1 1-2 8/10 b 28/42 50 3.3 F TSSOP28, DIP28, HVQFN33, LQFP48 On-chip power profile, I/O 5V tolerant; Both 7 mm x 7 mm and 5 mm x 5 mm HVQFN33 available LPC1113 24 4-8 5 11** 1 1 1-2 8/10 b 28/42 50 3.3 F HVQFN33, LQFP48 On-chip power profile, I/O 5V tolerant LPC1112 16 2-4 5 11** 1 1 1 8/10 b 28 50 3.3 F TSSOP20, TSSOP28, HVQFN24/33 On-chip power profile, I/O 5V tolerant; Both 7 mm x 7 mm and 5 mm x 5 mm HVQFN33 available LPC1111 LPC1110 8 4 2-4 1 5 5 11** 11** 1 1 1 1 1 1 8/10 b 5/10 b 28 16 50 50 3.3 3.3 F F TSSOP20, HVQFN33 SO20 On-chip power profile, I/O 5V tolerant On-chip power profile, I/O 5V tolerant *SCT peripheral can be configured as additional timers and/or PWM channels Includes Watchdog timer. ++ Using timers. Temp. range options F= -40 to +85 C J= -40 to +105 C + **MRT (Multi rate timer), Self wake-up timer, SCT can be configured as additonal timer 4 2 1 512 b 8 8 8 4 10 8 8 8 2 64 32 16 8 4 2 4 4 2 I/O voltage (V) CPU Voltage (V) Max freq. (MHz) 1 1 1 1 1 1 1 1 2 2 2 2 8/10 b 8/10 b 8/10 b 8/10 b 28/40/54 40 40 28 50 50 50 50 3.3 3.3 3.3 3.3 F F F F LQFP64, LQFP48, HVQFN33 LQFP48 LQFP48 HVQFN33 ROM Drivers- Power Profiles, 32-b Divide Libraries, EEPROM ROM Drivers- Power Profiles, 32-b Divide Libraries, EEPROM ROM Drivers- Power Profiles, 32-b Divide Libraries, EEPROM ROM Drivers- Power Profiles, 32-b Divide Libraries, EEPROM 6 6 6 6 13** 13** 13** 13** 2 2 2 2 1 1 1 1 1 1 1 1 8/10 b 8/10 b 8/10 b 8/10 b 39/55 39/55 39/55 39/55 30 30 30 30 3.3 3.3 3.3 3.3 F F F F LQFP48, LQFP64 LQFP48, LQFP64 LQFP48, LQFP64 LQFP48. LQFP64 Additional DMA, CRC, 2x comparators, RS-48S Additional DMA, CRC, 2x comparators, RS-48S Additional DMA, CRC, 2x comparators, RS-48S Additional DMA. CRC. 2x comparators. RS-48S 5 5 5 5 5 11** 11** 11** 11** 11** 1 1 1 1 1 1 1 1 1 1 2 2 2 1 1 8/12 b 8/12 b 8/12 b 8/10 b 8/10 b 28-51 28-51 28-51 28-42 28 72 72 72 72 72 3.3 3.3 3.3 3.3 3.3 F F F F F LQFP64, LQFP48, HVQFN33 LQFP64, LQFP48, HVQFN33 LQFP64, LQFP48, HVQFN33 LQFP48, HVQFN33 HVQFN33 USART, Smart Card Interface, EEPROM Drivers and Power Profiles in ROM USART, Smart Card Interface, EEPROM Drivers and Power Profiles in ROM USART, Smart Card Interface, EEPROM Drivers and Power Profiles in ROM Low-cost, low-power Cortex-M3 device 8K Flash / 2K RAM version of LPC1313 5 5 5 6 6 6 6 6 6 14** 14** 14** 2 2 2 2 2 2 1 1 1 2 2 2 1 1 1 2 2 2 8/12 b 8/10 b 8/10 b 32 32 32 32 32 32 F F F F F F LQFP48 LQFP48 LQFP48 LQFP48, HVQFN48 LQFP48, HVQFN48 LQFP48 64K RAM, 128K Flash 32K RAM version of LPC2106/01 16K RAM version of LPC2106/01 Lowest cost, lowest power, ADC 16K Flash, 4K RAM version of LPC2103 8K Flash, 2K RAM version of LPC2103 + Includes Watchdog timer. ++ Using timers. Temp. range options F= -40 to +85 C J= -40 to +105 C RTC 11** 11** 11** 11** External bus interface 5 5 5 5 I/O pins Available dual 1.8V and 3.3V VDD for HVQFN33 package Available dual 1.8V and 3.3V VDD for HVQFN33 package SD/MMC HVQFN24/33 HVQFN24/33 Comparator F F DAC (10-bit) channels 1.8 1.8 ADC channels/ resolution 50 50 I2S 20/27 20/27 SSP/SPI 6/8 b 6/8 b SPIFI 1 1 CAN 1 1 USB 1 1 Ethernet 11** 11** PWM channels++ 5 5 State config timer Temp. range options 10 8 6 4 Analog I2C 2/4 4/8 Serial Interfaces Package Standard Timers+ EEPROM (KB) Timers UART LPC1100LV devices LPC1112LV 16 LPC1114LV 32 LPC11E00 devices LPC11E14 32 LPC11E13 24 LPC11E12 16 LPC11E11 8 LPC1200 Devices LPC1227 128 LPC1226 96 LPC1225 64/80 LPC1224 32/48 LPC1300 devices LPC1317 64 LPC1316 48 LPC1315 32 LPC1313 32 LPC1311 8 LPC2100 LPC2106/01 128 LPC2105/01 128 LPC2104/01 128 LPC2103 32 LPC2102 16 LPC2101 8 RAM (KB) Type Flash (KB) Memory LCD controller LPC Go Cont’d 1 1 1 1 • • • • • • 60 60 60 70 70 70 1.8 1.8 1.8 1.8 1.8 1.8 3.3 3.3 3.3 3.3 3.3 3.3 Comment/Special features LPC Connect NXP’s LPC Connect microcontrollers add point-to-point connectivity to LPC Go products. Adding a USB or CAN interface to your system has never been easier. LPC Connect products combine these plug-and-play interfaces with software integrated drivers in on-chip ROM. Get to market faster with these easy-to-use connected microcontrollers. This category includes Cortex-M0, Cortex-M3 and ARM7 based microcontrollers. Temp. range options External bus interface 32K Flash version of LPC11U12 LQFP48 24K Flash version of LPC11U12 LPC11U12 16 6 5 11** 1 1 1 2 8/10 b 26/40 50 3.3 F LQFP48, HVQFN33 Low cost, low-power Cortex-M0 device with USB, on-chip power profiles I/O voltage ( V) HVQFN33, LQFP48, TFBGA48 F CPU Voltage ( V) F 3.3 Max freq. (MHz) 3.3 50 RTC 50 40 I/O pins 26/40 8/10 b SD/MMC 8/10 b 2 LCD controller 2 1 ADC channels/ resolution 1 1 I2S 1 1 SSP/SPI 1 11** SPIFI 11** 5 CAN I2C 5 6 Ethernet 6 24 EEPROM (KB) 32 LPC11U13 RAM (KB) LPC11U14 Type Flash (KB) UART DAC (10-bit) channels Analog USB Serial Interfaces PWM channels* Timers Standard Timers* Memory Package Comment/Special features LPC11U10 devices LPC11U20 devices LPC11U24 32 10 4 5 11** 1 1 2 8/10 b 26/40/54 50 3.3 F LQFP64, LQFP48, HVQFN33 ROM Drivers- USB drivers (HID, MSC, CDC), Power Profiles, 32-b Divide Libraries LPC11U24 32 8 2 5 11** 1 1 2 8/10 b 26/40 50 3.3 F HVQFN33 (5x5), TFBGA48, LQFP48 ROM Drivers- USB drivers (HID, MSC, CDC), Power Profiles, 32-b Divide Libraries LPC11U23 24 8 1 5 11** 1 1 2 8/10 b 40 50 3.3 F LQFP48 ROM Drivers- USB drivers (HID, MSC, CDC), Power Profiles, 32-b Divide Libraries LPC11U30 devices LPC11U37 128 10/12 4 5 11** 1 1 1 2 8/10 b 40/54 50 3.3 F LQFP48/64 On-chip power profile, I/O 5V tolerant, 256 Byte Flash sector LPC11U36 96 10/12 4 5 11** 1 1 1 2 8/10 b 40/54 50 3.3 F LQFP48/64 On-chip power profile, I/O 5V tolerant, 256 Byte Flash sector LPC11U35 64 10/12 4 5 11** 1 1 1 2 8/10 b 40/54 50 3.3 F HVQFN33, LQFP48/64, TFBGA48 On-chip power profile, I/O 5V tolerant, 256 Byte Flash sector, both 7mm x 7mm and 5mm x 5mm HVQFN33 available LPC11U34 40/48 8/10 4 5 11** 1 1 1 2 8/10 b 26/40 50 3.3 F HVQFN33, LQFP48 On-chip power profile, I/O 5V tolerant, 256 Byte Flash sector LPC11C00 devices LPC11C24 32 8 5 11** 1 1 1 2 8/10 b 36 50 3.3 F LQFP48 32K Flash version of LPC11C22 LPC11C22 16 8 5 11** 1 1 1 2 8/10 b 36 50 3.3 F LQFP48 Cortex-M0 MCU with on-chip CAN drivers and integrated CAN tranceiver LPC11C14 32 8 5 11** 1 1 1 2 8/10 b 42 50 3.3 F LQFP48 32K Flash version of LPC11C12 LPC11C12 16 8 5 11** 1 1 1 2 8/10 b 42 50 3.3 F LQFP48 Cortex-M0 MCU with on-chip CAN drivers LPC11Axx devices LPC11A14 32 8 4 5 11** 1 1 2 10-b/8 1 28/42 50 3.3 F HVQFN33, LQFP48 Comparator, VREF, UVLO protection LPC11A13 24 6 2 5 11** 1 1 2 10-b/8 1 28 50 3.3 F HVQFN33 Comparator, VREF, UVLO protection LPC11A12 16 4 1 5 11** 1 1 2 10-b/8 1 28/42 50 3.3 F HVQFN33, LQFP48 Comparator, VREF, UVLO protection LPC11A11 8 2 512b 5 11** 1 1 2 10-b/8 1 28 50 3.3 F HVQFN33 Comparator, VREF, UVLO protection 3.3 LPC11A04 32 8 4 5 11** 1 1 1 10-b/8 1 18 50 LPC11A02 16 4 2 5 11** 1 1 1 10-b/8 1 18 50 F WLCSP20 Miniature package size, Comparator, VREF, UVLO protection F WLCSP20 Comparator, VREF, UVLO protection LPC134x devices LPC1347 64 12 4 5 11** 1 1 1 2 8/12 b 28-51 72 3.3 F LQFP64, LQFP48, HVQFN33 FS USB Device, USB & EEPROM drivers and Power Profiles in ROM, USART, Smart Card Interface LPC1346 48 10 4 5 11** 1 1 1 2 8/12 b 28-51 72 3.3 F LQFP64, LQFP48, HVQFN33 FS USB Device, USB & EEPROM drivers and Power Profiles in ROM, USART, Smart Card Interface LPC1345 32 10 4 5 11** 1 1 1 2 8/12 b 28-51 72 3.3 F LQFP64, LQFP48, HVQFN33 FS USB Device, USB & EEPROM drivers and Power Profiles in ROM, USART, Smart Card Interface LPC1343 32 8 5 11** 1 1 1 1 8/10 b 28-42 72 3.3 F LQFP48, HVQFN33 Low-cost, low-power Cortex-M3 device with FS USB device interface and pre-loaded USB drivers LPC1342 16 4 5 11** 1 1 1 1 8/10 b 28 72 3.3 F HVQFN33 16K Flash / 4K RAM version of LPC1343 LPC213x devices LPC2138/01 512 32 5 6 2 2 2 2x8 1 47 • 60 3.3 F LQFP64, HVQFN64 Dual 8-ch. 10-bit ADC, BOD, POR, 32-kHz XTAL input, VBAT, fast I/O LPC2136/01 256 32 5 6 2 2 2 2x8 1 47 • 60 3.3 F LQFP64 256K Flash version of LPC2138/01 LPC2134/01 128 16 5 6 2 2 2 2x8 1 47 • 60 3.3 F LQFP64 128K Flash, 16K RAM version of LPC2138/01 LPC2132/01 64 16 5 6 2 2 2 8 1 47 • 60 3.3 F LQFP64, HVQFN64 64K Flash, 16K RAM version of LPC2138/01, single ADC LPC2131/01 32 8 5 6 2 2 2 8 47 • 60 3.3 F LQFP64 32K Flash, 8K RAM version of LPC2138/01, single ADC, no DAC * SCT peripheral can be configured as additional timers and/or PWM channels. ** Using timers. Temp. range options F= -40 to +85 C J= -40 to +105 C LPC Connect Cont’d Temp. range options I/O voltage ( V) CPU Voltage ( V) Max freq. (MHz) RTC External bus interface I/O pins SD/MMC DAC (10-bit) channels LCD controller ADC channels/ resolution I2S Analog SSP/SPI SPIFI CAN I2 C UART USB Serial Interfaces Ethernet PWM channels* Standard Timers* Timers EEPROM (KB) RAM (KB) Type Flash (KB) Memory Package Comment/Special features LPC2138 plus USB 2.0 FS device LPC214x devices LPC2148 512 40 5 6 1 2 2 2 8+6/10 b 1 45 • 60 3.3 F LQFP64 LPC2146 256 40 5 6 1 2 2 2 8+6/10 b 1 45 • 60 3.3 F LQFP64 LPC2136 plus USB 2.0 FS device LPC2144 128 16 5 6 1 2 2 2 8+6/10 b 1 45 • 60 3.3 F LQFP64 LPC2134 plus USB 2.0 FS device LPC2142 64 16 5 6 1 2 2 2 6/10 b 1 LPC2141 32 8 5 6 1 2 2 2 6/10 b * SCT peripheral can be configured as additional timers and/or PWM channels. ** Using timers. 45 • 60 3.3 F LQFP64 LPC2132 plus USB 2.0 FS device 45 • 60 3.3 F LQFP64 LPC2131 plus USB 2.0 FS device LPC ConnectPlus NXP’s LPC ConnectPlus microcontrollers offer a broad range of interfaces and the bandwidth for running these multiple communication protocols simultaneously. Connect to USB plus CAN plus Ethernet plus LCD and more. LPC ConnectPlus products are offered in a wide range of packages, memories and peripherals and feature pin-compatibility between cores. This category includes Cortex-M3, Cortex-M4 and ARM7 based microcontrollers. 3 2 3 1 8/12 b 1 1 1 109-165 8-32 1 120 3.3 F LQFP208, TFBGA208, TFBGA180, LQFP144 USB host/OTG/device, QEI, 8/16/32-bit External Memory Controller (depends on package) 1 5 3 2 3 1 8/12 b 1 1 1 165 32 1 120 3.3 F LQFP208 USB host/OTG/device, QEI 1 5 3 2 3 1 8/12 b 1 1 1 165 32 1 120 3.3 F LQFP208 USB host/OTG/device, QEI 1 5 3 2 3 1 8/12 b 1 1 1 165 32 1 120 3.3 F LQFP208 USB Host/OTG/device USB host/OTG/device, QEI, 8/16/32-bit External Memory Controller (depends on package) Temp. range options 6 5 I/O voltage (V) 6 5 1 CPU Voltage (V) 5 4 Max freq. (MHz) 4 80 RTC 80 256 External bus interface 256 LPC1785 I/O pins LPC1786 SD/MMC 6 LCD controller 5 DAC (10-bit) channels 4 ADC channels/ resolution 96 I2S** 5125 SSP/SPI** LPC1787 1 SPIFI 6 CAN 5 I2C** 4 UART** PWM channels* 96 Analog USB Standard Timers* 512 Serial Interfaces Ethernet EEPROM (KB) LPC1788 Type State Config. Timer RAM (KB) Timers Flash (KB) Memory Package Comment/Special features LPC17xx devices LPC1778 512 96 4 5 6 LPC1777 512 96 4 5 6 LPC1776 256 80 4 5 6 LPC1774 128 40 2 5 LPC1773 128 40 2 LPC1769 512 LPC1768 512 LPC1767 1 1 8-32 1 120 3.3 F LQFP208, TFBGA208, TFBGA180, LQFP144 165 32 1 120 3.3 F LQFP208 USB host/OTG/device, QEI 141-165 16-32 1 120 3.3 F LQFP208, TFBGA180 USB host/OTG/device, QEI 8-32 1 120 3.3 F LQFP208, LQFP144 USB Device Only, 8/32-bit External Memory Controler (depends on package) 109-165 1 120 3.3 F LQFP144 USB Device Only 1 70 1 120 3.3 F LQFP100 FS USB Host/OTG/Device, QEI, Motor Control PWM 1 70 1 100 3.3 F LQFP100, TFBGA100 FS USB Host/OTG/Device, QEI, Motor Control PWM 8/12 b 1 70 1 100 3.3 F LQFP100 QEI, Motor Control PWM 1 8/12 b 1 70 1 100 3.3 F LQFP100 FS USB Host/OTG/Device, QEI, Motor Control PWM 1 8/12 b 1 70 1 100 3.3 F LQFP100, TFBGA100 FS USB Host/OTG/Device, QEI, Motor Control PWM 1 5 3 2 3 1 8/12 b 1 1 1 5 3 2 3 1 8/12 b 1 1 1 5 3 2 3 1 8/12 b 1 1 6 1 4 3 2 3 1 8/12 b 1 109-165 5 6 1 4 3 2 3 1 8/12 b 1 64 6 6 1 1 4 3 2 2 1 8/12 b 64 6 6 1 1 4 3 2 2 1 8/12 b 512 64 6 6 1 4 3 2 1 LPC1766 256 64 6 6 1 1 4 3 2 2 LPC1765 256 64 6 6 1 4 3 2 2 LPC1764 128 32 6 6 1 4 3 2 2 LPC1763 256 64 6 6 4 3 LPC1759 512 64 6 6 1 4 3 LPC1758 512 64 6 6 1 4 LPC1756 256 32 6 6 1 4 LPC1754 128 32 6 6 1 LPC1752 64 16 6 6 LPC1751 32 8 6 6 1 1 109-165 LPC17xx devices 1 1 70 1 100 3.3 F LQFP100 FS USB Host/OTG/Device, QEI, Motor Control PWM 2 1 8/12 b 8/12 b 1 70 1 100 3.3 F LQFP100 QEI, Motor Control PWM 2 2 1 6/12 b 1 52 1 120 3.3 F LQFP80 FS USB Host/OTG/Device, QEI, Motor Control PWM 3 2 2 1 6/12 b 1 52 1 100 3.3 F LQFP80 FS USB Host/OTG/Device, QEI, Motor Control PWM 3 2 2 1 6/12 b 1 52 1 100 3.3 F LQFP80 FS USB Host/OTG/Device, QEI, Motor Control PWM 4 3 1 2 6/12 b 1 52 1 100 3.3 F LQFP80 FS USB Host/OTG/Device, QEI, Motor Control PWM 1 4 3 1 2 6/12 b 52 1 100 3.3 F LQFP80 FS USB Host/OTG/Device, QEI, Motor Control PWM 1 4 3 1 2 6/12 b 52 1 100 3.3 F LQFP80 FS USB Host/OTG/Device, QEI, Motor Control PWM * SCT peripheral can be configured as additional timers and/or PWM channels. ** SGPIO peripheral can be configured as additional I2S, I2C, UART and/or SSP channels. Temp. range options F= -40 to +85 C J= -40 to +105 C LPC ConnectPlus Cont’d • 72 3.3 F LQFP144 On-chip 4 MHz RC-Osc, GP DMA, RTC w/ 2K batt. RAM USB 2.0 FS device w/ PHY, DMA and 4K RAM; UART 3 w/ IrDA; MiniBus (8-bit) • • 72 3.3 F LQFP144 LPC2378 without USB or CAN 70 • 72 3.3 F LQFP100, TFBGA100 100-pin version of LPC2378 with USB device, no external bus 70 • 72 3.3 F LQFP100 LPC2368 without USB or CAN 1 70 • 72 3.3 F LQFP100 256K Flash version of LPC2368 with USB device, no SD/MMC 6/10 b 1 70 • 72 3.3 F LQFP100 LPC2366 without USB or CAN 1 6/10 b 1 70 • 72 3.3 F,H LQFP100 TFBGA100 128K Flash / 34K RAM version of LPC2368 with USB device, no SD/MMC 3 1 6/10 b 1 70 • 72 3.3 F LQFP100 LPC2364 with USB host/OTG/device and more RAM 2 3 1 6/10 b 1 70 • 72 3.3 F LQFP100 64K Flash, USB host/OTG/device and CAN controller 3 2 3 1 8/10 b 1 • 104 • 72 3.3 F LQFP144 LPC2378 with 98K SRAM and USB host/OTG/device 4 3 2 3 1 6/10 b 1 • 70 • 72 3.3 F LQFP100 LPC2368 with 98K SRAM and USB host/OTG/device 4 3 2 3 1 8/10 b 1 • 104 • • 72 3.3 F LQFP144 On-chip 4 MHz RC-Osc, GP DMA, RTC w/ 2K batt. RAM USB 2.0 FS device w/ PHY, DMA and 4K RAM; UART 3 w/ IrDA; MiniBus (8-bit) 4 3 3 1 8/10 b 1 • 104 • • 72 3.3 F LQFP144 LPC2378 without USB or CAN 4 3 3 1 6/10 b 1 • 70 • 72 3.3 F LQFP100, TFBGA100 100-pin version of LPC2378 with USB device, no external bus 4 3 3 1 6/10 b 1 • 70 • 72 3.3 F LQFP100 LPC2368 without USB or CAN 4 3 3 1 6/10 b 1 70 • 72 3.3 F LQFP100 256K Flash version of LPC2368 with USB device, no SD/MMC 4 3 3 1 6/10 b 1 70 • 72 3.3 F LQFP100 LPC2366 without USB or CAN 1 4 3 2 3 1 6/10 b 1 70 • 72 3.3 F,H LQFP100 TFBGA100 128K Flash / 34K RAM version of LPC2368 with USB device, no SD/MMC 1 4 3 2 3 1 6/10 b 1 70 • 72 3.3 F LQFP100 LPC2364 with USB host/OTG/device and more RAM 1 4 3 2 3 1 6/10 b 1 70 • 72 3.3 F LQFP100 64K Flash, USB host/OTG/device and CAN controller 4 3 2 3 1 8/10 b 1 • 104 LPC2387 512 98 6 6 1 1 4 3 2 3 1 6 1 • 70 LPC2378 512 58 6 6 1 1 4 3 2 3 1 8/10 b 1 • 104 LPC2377 512 58 6 6 1 4 3 3 1 8/10 b 1 • 104 LPC2368 512 58 6 6 1 4 3 3 1 6/10 b 1 • LPC2367 512 58 6 6 1 4 3 3 1 6/10 b 1 • LPC2366 256 58 6 6 1 4 3 3 1 6/10 b LPC2365 256 58 6 6 1 4 3 3 1 LPC2364 128 34 6 6 1 1 4 3 2 3 LPC2362 128 58 6 6 1 1 4 3 2 LPC2361 64 34 6 6 1 4 3 LPC2388 512 98 6 6 1 1 4 LPC2387 512 98 6 6 1 1 LPC2378 512 58 6 6 1 1 LPC2377 512 58 6 6 1 LPC2368 512 58 6 6 1 LPC2367 512 58 6 6 1 LPC2366 256 58 6 6 1 LPC2365 256 58 6 6 1 LPC2364 128 34 6 6 1 LPC2362 128 58 6 6 1 LPC2361 64 34 6 6 I/O voltage (V) 1 LCD controller 1 SPIFI 6 EEPROM (KB) 6 Floating Pt Unit 98 M0 Coprocessor 512 Temp. range options • LPC2388 Type CPU Voltage (V) Max freq. (MHz) LPC2368 with 98K SRAM and USB host/OTG/device I/O pins LQFP100 SD/MMC F DAC (10-bit) channels 3.3 ADC channels/ resolution 72 I2S** • SSP/SPI** LPC2378 with 98K SRAM and USB host/OTG/device CAN LQFP144 I2C** F UART** 3.3 USB 72 Ethernet • PWM channels* • Standard Timers* RTC Analog External bus interface Serial Interfaces RAM (KB) State Config. Timer Timers Flash (KB) Memory Package Comment/Special features LPC23xx devices 1 1 2 2 • LPC23xx devices 1 1 2 2 * SCT peripheral can be configured as additional timers and/or PWM channels. ** SGPIO peripheral can be configured as additional I S, I2C, UART and/or SSP channels. 2 Temp. range options F= -40 to +85 C J= -40 to +105 C LPC ConnectPlus cont’d I2C** CAN SSP/SPI** I2S** ADC channels/ resolution DAC (10-bit) channels LCD controller SD/MMC I/O pins External bus interface RTC Max freq. (MHz) 1 2 4 3 2 2 1 8/10 b 1 • • 160 • • 72 3.3 F LPFP208, TFBGA208 LPC2468 with XGA LCD controller, USB device/host/OTG 98 6 12 1 2 4 3 2 2 1 8/10 b 1 • • 160 • • 72 3.3 F LPFP208, TFBGA208 LPC2468 with XGA LCD controller, USB device/host/OTG 98 6 12 1 2 4 3 2 2 1 8/10 b 1 • 160 • • 72 3.3 F LPFP208, TFBGA208 On-chip 4-MHz RC-Osc, GP DMA, RTC w/ 2K batt. RAM 2 PWM blocks; USB 2.0 FS host/OTG/device, DMA and 4K RAM; UART 3 w/ IrDA; 32-bit ext. bus 98 6 12 1 2 4 3 2 2 1 8/10 b 1 • 160 • • 72 3.3 F LPFP208, TFBGA208 Flashless LPC2468 98 6 12 1 2 4 3 2 2 1 8/10 b 1 • 160 • • 72 3.3 F TFBGA180 LPC2468 with 16-bit external memory interface, USB device/host/OTG 82 6 12 2 4 3 2 1 8/10 b 1 • 160 • • 72 3.3 F LPFP208, TFBGA208 Flashless USB device/host/OTG controller, USB device/host/OTG 5 6 1 5 3 3 1 8/12 b 1 1 109-165 8-32 1 120 3.3 F LQFP208, TFBGA208, TFBGA180, LQFP144 USB host/OTG/device, QEI, 8/16/32-bit External Memory Controller (depends on package), 2 analog comparators USB host/OTG/device, QEI, 8/16/32-bit External Memory Controller (depends on package), 2 analog comparators I/O voltage (V) Temp. range options UART** 12 CPU Voltage (V) USB 6 SPIFI Ethernet 98 State Config. Timer 512 EEPROM (KB) PWM channels* Analog Standard Timers* Serial Interfaces RAM (KB) Timers Flash (KB) Floating Pt Unit Type M0 Coprocessor Memory Package Comment/Special features LPC24xx devices LPC2478 LPC2470 LPC2468 512 LPC2460 LPC2458 512 LPC2420 LPC4000 Series LPC4088 1 512 96 4 1 2 1 1 LPC4078 1 512 96 4 5 6 1 1 5 3 2 1 3 1 8/12 b 1 1 53-165 8-32 1 120 3.3 F LQFP208, TFBGA208, TFBGA180, LQFP144 , LQFP80 LPC4076 1 256 80 4 5 6 1 1 5 3 2 1 3 1 8/12 b 1 1 109-140 8-16 1 120 3.3 F TFBGA180, LQFP144 USB host/OTG/device, QEI, 8/16-bit External Memory Controller (depends on package) , 2 analog comparators LPC4074 128 40 2 5 6 1 4 3 2 1 3 1 8/12 b 1 53-109 8 1 120 3.3 F LQFP144, LQFP80 USB device, 8-bit External Memory Controller LPC4072 64 32 2 5 6 1 4 3 2 1 3 1 8/12 b 1 53 8 1 120 3.3 F TFBGA80, LQFP80 USB device, 8-bit External Memory Controller * SCT peripheral can be configured as additional timers and/or PWM channels. ** SGPIO peripheral can be configured as additional I S, I2C, UART and/or SSP channels. 2 Temp. range options F= -40 to +85 C J= -40 to +105 C LPC ConnectTurbo NXP’s LPC ConnectTurbo microcontrollers include the Industry’s fastest Cortex-M Microcontrollers. This turbo performance is combined with advanced peripherals for solving complex design challenges. LPC ConnectTurbo innovations include Hi-speed USB with integrated Hi-speed PHY, NXP’s unique SPI Flash Interface (SPIFI), State Configurable Timer (SCT), Serial GPIO and an industry first dual-core Cortex-M4/M0. All this integration reduces system cost and enables unprecedented embedded performance. This category includes Cortex-M3, Cortex-M4 and ARM9 based microcontrollers. I2C** CAN SPIFI SSP/SPI** I2S** ADC channels/ resolution DAC (10-bit) channels LCD controller SD/MMC I/O pins External bus interface RTC Max freq. (MHz) 1 2 4 2 2 1 3 2 8/10 b (x2) 1 1 1 146 16-32 1 180 3.3 F and J LQFP208, LBGA256/ TFBGA180 Dual-bank Flash, 1024x768 Color LCD Controller, On-chip HS PHY, SPIFI, SCT, RTC, QEI. 1 1 2 4 2 2 1 3 2 8/10 b (x2) 1 1 1 146 16-32 1 180 3.3 F and J LQFP208, LBGA256/ TFBGA180 Dual-bank Flash, 1024x768 Color LCD Controller, On-chip HS PHY, SPIFI, SCT, RTC, QEI. ** 5 6 1 1 2 4 2 2 1 3 2 8/10 b (x2) 1 1 1 146 16-32 1 180 3.3 I/O voltage (V) Temp. range options UART** 1 6 CPU Voltage (V) USB 6 5 SGPIO Ethernet 5 16 RAM (KB) 16 512 Flash (KB) 1024 136 LPC1853 Floating Pt Unit LPC1857 Type M0 Coprocessor State Config. Timer Analog PWM channels* Serial Interfaces Standard Timers* Timers EEPROM (KB) Memory Package Comment/Special features LPC1800 devices LPC1850 136 200 LPC1837 1024 136 16 5 6 1 1 2 4 2 2 1 3 2 8/10 b (x2) 1 1 146 16-32 1 180 3.3 LPC1833 512 16 5 6 1 1 2 4 2 2 1 3 2 8/10 b (x2) 1 1 146 16-32 1 180 3.3 5 6 1 1 2 4 2 2 1 3 2 8/10 b (x2) 1 1 146 16-32 1 180 3.3 136 F LQFP208, LBGA256/ TFBGA180 LQFP144, LBGA256/ TFF and J BGA180/100 LQFP144, LBGA256/ TFF and J BGA180/100 LQFP144, LBGA256/ TFF BGA180/100 1024x768 Color LCD Controller, On-chip HS PHY, SPIFI, SCT, RTC, QEI. Available Q4 2011 ** Dual-bank Flash, On-chip HS PHY, SPIFI, SCT, RTC, QEI. Dual-bank Flash, On-chip HS PHY, SPIFI, SCT, RTC, QEI. LPC1830 200 LPC1827 1024 136 16 5 6 1 1 4 2 2 1 3 2 8/10 b (x2) 1 1 up to 64 8-16 1 180 3.3 J LQFP144, TFBGA100 Dual-bank Flash, On-chip HS PHY, SPIFI, SCT, RTC, QEI. LPC1825 768 136 16 5 6 1 1 4 2 2 1 3 2 8/10 b (x2) 1 1 up to 64 8-16 1 180 3.3 J LQFP144, TFBGA100 Dual-bank Flash, On-chip HS PHY, SPIFI, SCT, RTC, QEI. LPC1823 512 104 16 5 6 1 1 4 2 2 1 3 2 8/10 b (x2) 1 1 up to 64 8-16 1 180 3.3 J LQFP144, TFBGA100 Dual-bank Flash, On-chip HS PHY, SPIFI, SCT, RTC, QEI. LPC1822 512 104 16 5 6 1 1 4 2 2 1 3 2 8/10 b (x2) 1 1 up to 64 8-16 1 180 3.3 J LQFP144, TFBGA100 On-chip HS PHY, SPIFI, SCT, RTC, QEI. 5 6 1 1 4 2 2 1 3 2 8/10 b (x2) 1 1 up to 64 8-16 1 180 3.3 F LQFP144, TFBGA100 On-chip HS PHY, SPIFI, SCT, RTC, QEI. Available Q4 2011 On-chip HS PHY, SPIFI, SCT, RTC, QEI. Available Q4 2011 LPC1820 168 LPC1817 1024 136 16 5 6 1 4 2 2 1 3 2 8/10 b (x2) 1 1 up to 64 8-16 1 180 3.3 J LQFP144, TFBGA100 Dual-bank Flash, SPIFI, SCT, RTC, QEI. LPC1815 768 136 16 5 6 1 4 2 2 1 3 2 8/10 b (x2) 1 1 up to 64 8-16 1 180 3.3 J LQFP144, TFBGA100 Dual-bank Flash, SPIFI, SCT, RTC, QEI. LPC1813 512 104 16 5 6 1 4 2 2 1 3 2 8/10 b (x2) 1 1 up to 64 8-16 1 180 3.3 J LQFP144, TFBGA100 Dual-bank Flash, SPIFI, SCT, RTC, QEI. LPC1812 512 104 16 5 6 1 4 2 2 1 3 2 8/10 b (x2) 1 1 up to 64 8-16 1 180 3.3 J LQFP144, TFBGA100 SPIFI, SCT, RTC, QEI. 5 6 1 4 2 2 1 3 2 8/10 b (x2) 1 1 up to 64 8-16 1 180 3.3 F LQFP144, TFBGA100 SPIFI, SCT, RTC, QEI. Available Q4 2011 LPC1810 136 LPC4300 Series LPC4357 1 1 1024 136 16 5 6 1 1 2 4 2 2 1 3 2 1 8/10 b (x2) 1 1 1 146 16-32 1 204 3.3 LPC4353 1 1 16 5 6 1 1 2 4 2 2 1 3 2 1 8/10 b (x2) 1 1 1 146 16-32 1 204 3.3 1 512 136 LPC4350 1 1 5 6 1 1 2 4 2 2 1 3 2 1 8/10 b (x2) 1 1 146 16-32 1 204 3.3 LPC4337 1 1 1024 136 264 16 5 6 1 1 2 4 2 2 1 3 2 1 8/10 b (x2) 1 1 146 16-32 1 204 3.3 LPC4333 1 1 16 5 6 1 1 2 4 2 2 1 3 2 1 8/10 b (x2) 1 1 146 16-32 1 204 3.3 5 6 1 1 16 5 6 1 512 136 LPC4330 1 1 LPC4327 1 1 1024 136 264 2 4 2 2 1 3 2 1 8/10 b (x2) 1 1 146 16-32 1 204 3.3 1 4 2 2 1 3 2 1 4-6/10 b (x2) 1 1 up to 64 8-16 1 204 3.3 LQFP208, LBGA256/ TFBGA180 LQFP208, LBGA256/ TFBGA180 LQFP208, LBGA256/ F TFBGA180 LQFP144, LBGA256/ F and J TFBGA180/100 LQFP144, LBGA256/ F and J TFBGA180/100 LQFP144, LBGA256/ F TFBGA180/100 F and J F and J J LQFP144, TFBGA100 Dual-bank Flash, 1024x768 Color LCD Controller, HS USB PHY, QEI. Cortex-M4/M0, FPU, Dual-bank Flash, 1024x768 Color LCD Controller, HS USB PHY, SPIFI, SCT, SGPIO, RTC, QEI. Cortex-M4/M0, FPU, 1024x768 Color LCD Controller, HS USB PHY, SPIFI, SCT, SGPIO, RTC, QEI. Available Q4 2011 Cortex-M4/M0, FPU, Dual-bank Flash, HS USB PHY, SPIFI, SCT, SGPIO, RTC, QEI. Cortex-M4/M0, FPU, Dual-bank Flash, HS USB PHY, SPIFI, SCT, SGPIO, RTC, QEI. Cortex-M4/M0, FPU, HS USB PHY, SPIFI, SCT, SGPIO, RTC, QEI. Available Q4 2011 Cortex-M4/M0, FPU, Dual-bank Flash, HS USB PHY, SPIFI, SCT, SGPIO, RTC, QEI. LPC4325 1 1 768 136 16 5 6 1 1 4 2 2 1 3 2 1 4-6/10 b (x2) 1 1 up to 64 8-16 1 204 3.3 J LQFP144, TFBGA100 Cortex-M4/M0, FPU, Dual-bank Flash, HS USB PHY, SPIFI, SCT, SGPIO, RTC, QEI. LPC4323 1 1 512 104 16 5 6 1 1 4 2 2 1 3 2 1 4-6/10 b (x2) 1 1 up to 64 8-16 1 204 3.3 J LQFP144, TFBGA100 Cortex-M4/M0, FPU, Dual-bank Flash, HS USB PHY, SPIFI, SCT, SGPIO, RTC, QEI. * SCT peripheral can be configured as additional timers and/or PWM channels. ** SGPIO peripheral can be configured as additional I2S, I2C, UART and/or SSP channels. Temp. range options F= -40 to +85 C J= -40 to +105 C LPC ConnectTurbo Cont’d SD/MMC I/O pins External bus interface RTC 4 2 2 1 3 2 1 4-6/10 b (x2) 1 1 up to 64 8-16 1 204 3.3 J LQFP144, TFBGA100 Cortex-M4/M0, FPU, HS USB PHY, SPIFI, SCT, SGPIO, RTC, QEI. 5 6 1 1 4 2 2 1 3 2 1 4-6/10 b (x2) 1 1 up to 64 8-16 1 204 3.3 F LQFP144, TFBGA100 Cortex-M4/M0, FPU, HS USB PHY, SPIFI, SCT, SGPIO, RTC, QEI. Available Q4 2011 Temp. range options DAC (10-bit) channels 1 I/O voltage (V) ADC channels/ resolution 1 CPU Voltage (V) SGPIO 6 Max freq. (MHz) I2S** 5 PLL SSP/SPI** 16 LCD controller SPIFI 200 CAN 1 I2C** 1 UART** LPC4320 USB 104 Ethernet 512 State Config. Timer 1 Analog PWM channels* RAM (KB) 1 Serial Interfaces Standard Timers* Flash (KB) LPC4322 Type Timers EEPROM (KB) Floating Pt Unit M0 Coprocessor Memory Package Comment/Special features LPC4300 Series LPC4317 1 1 1024 136 16 5 6 1 4 2 2 1 3 2 1 4-6/10 b (x2) 1 1 up to 64 8-16 1 204 3.3 J LQFP144, TFBGA100 Cortex-M4/M0, FPU, Dual-bank Flash, SPIFI, SCT, SGPIO, RTC, QEI. LPC4315 1 1 768 136 16 5 6 1 4 2 2 1 3 2 1 4-6/10 b (x2) 1 1 up to 64 8-16 1 204 3.3 J LQFP144, TFBGA100 Cortex-M4/M0, FPU, Dual-bank Flash, SPIFI, SCT, SGPIO, RTC, QEI. LPC4313 1 1 512 104 16 5 6 1 4 2 2 1 3 2 1 4-6/10 b (x2) 1 1 up to 64 8-16 1 204 3.3 J LQFP144, TFBGA100 Cortex-M4/M0, FPU, Dual-bank Flash, SPIFI, SCT, SGPIO, RTC, QEI. 512 104 16 LPC4312 1 1 LPC4310 1 1 168 5 6 1 4 2 2 1 3 2 1 4-6/10 b (x2) 1 1 up to 64 8-16 1 204 3.3 J LQFP144, TFBGA100 Cortex-M4/M0, FPU, SPIFI, SCT, SGPIO, RTC, QEI. 5 6 1 4 2 2 1 3 2 1 4-6/10 b (x2) 1 1 up to 64 8-16 1 204 3.3 F LQFP144, TFBGA100 Cortex-M4/M0, FPU, SPIFI, SCT, SGPIO, RTC, QEI. Available Q4 2011 LPC 2900 LPC2939 768 LPC2930 56 16 7 24 2 4 2 2 3 24/10 b 152 • • 125 1.8 3.3 F LQFP208 ARM968E-S MCU with USB host/OTG/device, 32K I- & D- TCM, motor control, GP DMA, 16 KB EEPROM 56 16 7 24 2 4 2 2 3 24/10 b 152 • • 125 1.8 3.3 F LQFP208 Flashless version of LPC2939 LPC2929 768 56 16 7 24 1 4 2 2 3 24/10 b 104 • • 125 1.8 3.3 F LQFP144 LPC2939 with 144 pins and without USB host LPC2927 512 56 16 7 24 1 4 2 2 3 24/10 b 104 • • 125 1.8 3.3 F LQFP144 LPC2929 with 512K Flash, USB device/OTG LPC2926 256 56 16 7 24 1 4 2 2 3 24/10 b 104 • 125 1.8 3.3 F LQFP144 LPC2927 with 256K Flash LPC2925 512 40 16 7 24 1 4 2 2 3 16/10 b 60 • 125 1.8 3.3 F LQFP100 LPC2923 256 24 16 7 24 1 4 2 2 3 16/10 b 60 • 125 1.8 3.3 F LQFP100 LPC2925 with 256K Flash LPC2921 128 24 16 7 24 1 4 2 2 3 16/10 b 60 • 125 1.8 3.3 F LQFP100 LPC2923 with 128K Flash, USB device LPC2919/01 768 56 16 7 24 4 2 2 3 16/10 b 108 • • 125 1.8 3.3 F LQFP144 ARM968E-S MCU with 2 LIN master controllers, 16K I-TCM, 16K D-TCM LPC2917/01 521 56 16 7 24 4 2 2 3 16/10 b 108 • • 125 1.8 3.3 F LQFP144 LPC2919/01 with 512K Flash * Includes Watchdog timer and real-time clock. ** Using timers 0-3. Temp. range options F= -40 to +85 C J= -40 to +105 C LPC Command NXP’s LPC Command application processors provide an ideal low-cost platform for running the Linux operating system. Based on the ARM9 core, LPC Command products provide an extensive set of peripherals and are designed for general purpose and specialty embedded applications such as high-speed document printers/scanners, industrial control, and motor control. This category includes ARM9 based microcontrollers. I2S ADC channels/ resolution LCD controller SD/MMC I/O pins External bus interface PLL Max freq. (MHz) CPU Voltage (V) I/O voltage (V) Temp. range options 1 3 2 3/10 b • • 157 • • 180 1.2 1.8/2.8/3.3 F TFBGA208 LPC3152 with a Decryption Engine & Secure Boot LPC3152 192 4 1 1 1 1 3 2 3/10 b • • 157 • • 180 1.2 1.8/2.8/3.3 F TFBGA208 Stereo CODEC with Class-AB headphone amplifier, power supply unit, battery charger, unique ID, OTP, HS USB 2.0 OTG with on-chip PHY, NAND Flash controller, MMC/SDHC/SDIO/CE-ATA, 6800/8080/serial LCD interface LPC3143 192 4 1 1 1 2 4 2 4/10 b • • 97 • • 270 1.2 1.8/2.8/3.3 F TFBGA180 LPC3141 with a Decryption Engine & Secure Boot LPC3141 192 4 1 1 1 2 4 2 4/10 b • • 97 • • 270 1.2 1.8/2.8/3.3 F TFBGA180 HS USB 2.0 OTG with on-chip PHY, NAND Flash controller, MMC/SDHC/SDIO/CE-ATA, 6800/8080 LCD interface, random number generator, unique ID, OTP LPC3131 192 4 1 1 1 2 4 2 4/10 b • • 97 • • 180 1.2 1.8/2.8/3.3 F TFBGA180 LPC3130 with 192K SRAM, HS USB host/OTG/device LPC3130 96 4 1 1 1 2 4 2 4/10 b • • 97 • • 180 1.2 1.8/2.8/3.3 F TFBGA180 HS USB 2.0 host/OTG/device with on-chip PHY, NAND Flash controller with 8-bit ECC, MMC/SDHC/ SDIO/CE-ATA, 6800/8080/serial LCD interface, random number generator LPC3180/01 64 4 1 1 7 2 3 • 55 • • 208 1.2 1.8/2.8/3.0 F LFBGA320 VFP unit, NAND Flash, SDRAM/DDR, USB 2.0 FS host/OTG device 256 8 11 1 7 2 • 87 • • 1.8/2.8/3.0 F LFBGA296 VFP unit, NAND Flash, SRAM/SDRAM/DDR, USB 2.0 FS host/OTG/device, 24-bit color LCD controler and touchscreen controller, keypad interface, and 0.9 V low-power mode DAC (10-bit) channels SSP/SPI 1 SPFI 1 CAN I2C 1 Ethernet 4 EEPROM (KB) 192 RAM (KB) LPC3154 Type Flash (KB) UART Analog USB Serial Interfaces PWM channels Timers Standard Timers Memory Package Comment/Special features LPC3100 3/10 b LPC3200 LPC3250 LPC3240 256 8 11 LPC3230 256 8 LPC3220 128 8 Temp. range options F= -40 to +85 C J= -40 to +105 C 1 1 2 2 2 3/10 b 1 7 2 2 2 2 3/10 b 11 1 7 2 2 2 2 3/10 b 11 1 7 2 2 2 2 3/10 b • • 266/208 1.35/1.2 • 87 • • 266/208 1.35/1.2 1.8/2.8/3.0 F LFBGA296 VFP unit, NAND Flash, SRAM/SDRAM/DDR, USB 2.0 FS host/OTG/device, keypad interface, and 0.9 V low-power mode • 87 • • 266/208 1.35/1.2 1.8/2.8/3.0 F LFBGA296 VFP unit, NAND Flash, SRAM/SDRAM/DDR, USB 2.0 FS host/OTG/device, 24-bit color LCD controler and touchscreen controller, keypad interface, and 0.9 V low-power mode • 87 • • 266/208 1.35/1.2 1.8/2.8/3.0 F LFBGA296 VFP unit, NAND Flash, SRAM/SDRAM/DDR, USB 2.0 FS host/OTG/device, keypad interface, and 0.9 V low-power mode Need devices, support, or development tools? For a list of sales offices and distributors near you, please visit www.nxp.com/profile/sales/index.html For general support, please visit www.nxp.com/microcontrollers For tools, evaluation boards, or development support, please visit www.nxp.com www.nxp.com © 2012 NXP Semiconductors N.V. All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The Date of release: November 2012 information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and Document order number: 9397 750 17327 may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof Printed in the Netherlands does not convey nor imply any license under patent- or other industrial or intellectual property rights.