Chongqing GBJ1001 Single phase10.0amps.glass passivated bridge rectifier Datasheet

GBJ10005 THRU GBJ1010
SINGLE PHASE10.0AMPS.GLASS PASSIVATED BRIDGE RECTIFIERS
FEATURE
GBJ
.UL Listed Under Recognized Component Index,
File Number E338195
.Glass passivated chip junctions
.High case dielectric stength
.Low Reverse Leakage Current
.High surge current capability
.Ideal for Printed Circuit Board Applications
MECHANICAL DATA
.Case: GBJ
.Case Material: Molded Plastic.
UL Flammability Classification Rating 94V-0
.Terminals: Pure tin plated, Lead free.
Leads solderable per MIL-STD-750, Method 2026.
.Polarity: Molded on Body
.Mounting: Through Hole for #6 Screw
.Mounting Torque: 5.0 in-lbs Maximum
.Weight:6.6grams
1.193(30.3)
1.169(29.7)
.106(2.7)
.096(2.3)
.094(2.4)
.078(2.0)
.043(1.1)
.035(0.9)
+
~ ~ -
.119
(0.5)
.165(4.2)
.150(3.8)
.433(11)
.354(9.0)
.189(4.8)
.177(4.5)
HOLE FOR NO.
6 SCREW
.303(7.7)
.303(7.7) .287(7.3)
.287(7.3)
.150(3.8)
.138(3.5)
.800(20.3)
.776(19.7)
.441(11.2)
.425(10.8)
.708(18.0)
.669(17.0)
+
.184(3.4)
.122(3.1)
.114(2.9)
.098(2.5)
.031(0.8)
.023(0.6)
~~ -
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz,resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC blocking Voltage
Maximum Average Forward (with heatsink Note2)
Rectified Current @ TC=110°C(without heatsink)
SYM
BOL
GBJ
10005
GBJ
1001
GBJ
1002
GBJ
1004
GBJ
1006
GBJ
1008
GBJ
1010
units
VRRM
VRMS
VDC
50
100
200
400
600
800
1000
V
35
70
140
280
420
560
700
V
50
100
200
400
600
800
1000
V
10.0
IF(AV)
3.0
A
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed on rate load (JEDEC
IFSM
220
A
method)
Maximum Forward Voltage
@10.0A DC
Drop per element
@ 5.0A DC
Maximum DC Reverse Current
at rated DC blocking voltage
@TJ =25°C
@TJ =125°C
I2t Rating for Fusing (t﹤8.3ms)
Typical Junction Capacitance (Note 1)
Typical Thermal Resistance (Note 2)
Storage Temperature
Operating Junction Temperature
1.1
VF
1.05
10.0
IR
500.0
I 2t
CJ
R(JC)
TSTG
TJ
Note:
1. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
2.Device mounted on 150mm x 150mm x 1.6mm Cu Plate Heatsink.
- 41 -
V
μA
200
A2Sec
70
pF
1.4
°C/W
-55 to +150
°C
-55 to +150
°C
RATING AND CHARACTERISTIC CURVES (GBJ10005 THRU GBJ1010)
FIG.1-TYPICAL FORWARD CURRENT
DERATING CURVE
FIG.2-TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
10
10.0
INSTANEOUS FORWARD
CURRENT,(A)
AVERGE FORWARD
RECTIFIED CURRENT,(A)
12.0
With Heatsink
8.0
Single Phase Half Wave 60Hz
Resistive or inductive Load
6.0
4.0
2.0
0
Without Heatsink
0
25
50
75
100
125
1.0
0.1
.01
150
TJ=25℃
Pulse Width=300 μs
1% Duty Cycle
0.8
0.6
.4
1.0
1.2
CASE TEMPERTURE,(℃)
INSTANEOUS FORWARD VOLTAGE,(V)
FIG.3-MAXIMUN NON-REPETITIVE
FORWARD SURGE CURRENT
FIG.4-TYPIAL JUNCTION CAPAOTANCE
JUNCTION CAPACITANCE,(pF)
240
8.3ms Single Half
Sine-Wave (JEDEC
Method)
180
120
60
0
1
100
10
1
100
10
4
1
10
REVERSE VOLTAGE,(V)
NUMBER OF CYCLES AT 60Hz
FIG.5-TYPICAL REVERSE CHARACTERISTICS
1000
INSTANEOUS REVERSE CURRENT,( μA)
PEAK FORWARD SURGE
CURRENT,(A)
1000
TJ=150℃
100
TJ=125℃
10
TJ=100℃
1.0
TJ=25℃
0.1
0
20
40
60
80
100
120
PERCENT OF RATED PEAK REVERSE VOLTAGE,(%)
- 42 -
100
Similar pages