AHP1001 M edi c a l Gr a d e C las s I I 10 Wat t A dapt er series 10 Watt, Wall Mount medical Single Outputs of 3.3VDC to 55VDC 80-275VAC Input Operating Range Option “B” Option “A” HPU63B series 63 4000VAC Input to Output Isolation The HPU63B series of AC/DC switching mode power supplies provide 63 Watts of continuous output power . All supplies are 4 UL94V-1 Input Plug min Options compliant. All models meet FCC Part-18 class B and CISPR-11 EN55011 class B emission Limits and are designed to UL60601-1 EditionESApprovals comply with3rd ANSI/AAMI 60601-1: 2005(UL/cUL 3rd Edition), EN 60601-1:2006 (TUV/T-mark 3rd Edition) and new CE requirements. All units are 100% burned in and tested. Option “C” Option “D” RoHS2 2011/65/EU Model Number Output Output Output VDC Amps (max.) Power Efficiency Ripple & FL, 230VAC Noise Total No Load Regulation Consumption FEATU * Wide O * IEC-32 * Single * Over V * Medic * Input t * Energy * Class II * 3 year APPLIC *AHP1001 (A, B, C, or D)-01 3.3 1.82 6 Watts 65% typ. 66 mV p-p ±5% 0.2 Watts * Home * Patien * Blood * Portab * ECG m *AHP1001 (A, B, C, or D)-02 5 1.6 8 Watts 80% typ. 50 mV p-p ±5% 0.3 Watts GENER *AHP1001 (A, B, C, or D)-03 6 1.33 8 Watts 81% typ. 60APPROVALS: mV p-p ±5% 0.3 Watts *AHP1001 (A, B, C, or D)-04 10 1.0 10 Watts 83% typ. 80 mV p-p ±5% *AHP1001 (A, B, C, or D)-05 12 0.83 10 Watts 84% typ. 0.3 Watts CB 100 mV p-p ±5% 0.3 Watts *AHP1001 (A, B, C, or D)-06 15 0.66 10 Watts 85% typ. 100 mV p-p ±5% *AHP1001 (A, B, C, or D)-07 18 0.55 10 Watts 86% typ. *AHP1001 (A, B, C, or D)-08 24 0.42 10 Watts 86% typ. 100 mV p-p ±5% Characteristic 0.3 Watts Symbol Safety Approval Input Vins 100 mV p-p ±5% 0.3Voltage WattsRange *AHP1001 (A, B, C, or D)-09 30 0.33 10 Watts 86% typ. Input Operate Voltage VinmV p-p 100 ±3% 0.3Range Watts *AHP1001 (A, B, C, or D)-10 36 0.27 10 Watts 86% typ. 100 mV p-p ±3% *AHP1001 (A, B, C, or D)-11 48 0.21 10 Watts 86% typ. *AHP1001 (A, B, C, or D)-12 55 0.18 10 Watts 86% typ. 100 mV p-p 0.3 Watts Low±3% Line Input Current Iil SINGLE OUTPUT * Note: EN 60601-1 IEC 60601-1 0.3 Watts Electrical Characteristics: Fi Input Frequency Po Output Power Range 0.3 Watts 100 0.3 Watts High±3% Line Input Current Iih mV p-p Detail to see Fig.1 (Derate linearly Sine wave See Rating Chart Full Load, Vin=100VAC Full Load, Vin=240VAC Irl Low Line Input Inrush Current Full Load, 25°C, Cool start, Vin=1 High Line Input Inrush Current Full Load, 25°C, Cool start, Vin=2 Efficiency WWW.ASTRODYNETDI.COM Safety Approval & Specification i Irh The Asterisk (*) denotes a choice of AC Input Connectors (A, B, C, or D option; i.e. AHP1001B-101). TheLine options are as follows: Regulation △Voi A: 2 Prong U.S. Plug in a Slimeline Package (Good for use in space deficient power strips!) Over Voltage Protection OVP B: 3 Prong UK Plug OLP Over Load Protection C: 2 Prong Euro Plug Time of Transient Response ttr D: 2 Prong U.S. Plug in a Wallmount Package Please see Mechanical Dimensions. PS E * Short C * Coolin * Flamm * Protec * Safety (TUV/T-m Full Load, Vin=230VAC, Detail to Full Load, Vin=100~120VAC or 20 Recovers automatically after fau Full Load, Vin=110VAC thu Hold-Up Time Full Load, Vin=100VAC ts Start-up time Full Load, Vin=100~240VAC HV Dielectric Withstanding Voltage (P-S) Primary to Secondary, limit curre EMI EMC Emission Compliance to EN55011 (CISPR1 All specifications areTemperature typical at nominal input, full load, and 25°C unless otherCoefficient Tc All Condition wise noted Environmental: Symbol To ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 Characteristic Operating Temperature Detail to see Fig.2 (Derate linearly AHP1001 M edi c a l Gr a d e C las s I I 10 Wat t A dapt er INPUT SPECIFICATIONS Input Voltage Range (See I/P series ENVIRONMENTAL SPECIFICATIONS 80-275 VAC (100-240VAC Nom.) Operating Temperature -10 to +70°C See Input Derate Curve (Fig 1) See Temp Derate Curve (Fig 2) Frequency Range Sine Wave, 47-63 Hz Storage Temperature -40 to +85°C, 10~95% RH * Inrush I, Cold Start, FL 25°C 40A @ 100VAC * Operating & Storage Humidity 0% to +95%, 100A @ 240VAC FL * Non-Condensing * Input Current (100Vin/240Vin) 0.3A max./0.2A max. FL Cooling Free Air Convection Protection Class Double Insulated, Class II Surge Voltage 2kV, min. EMC Emission EN55011 (CISPR11) OUTPUT SPECIFICATIONS EN61000-3-2, -3 Class B ESD Contact 6KV, Air 8KV IEC61000-4-2 Voltage and Current See Selection Chart Page 1 Vibration 5G Min. Line Regulation HL-LL ±1%, max. FL Operating Altitude (Elevation) 3000m max. Total Regulation See Selection Chart Page 1 10 ~ 500Hz, 10min./1cycle, Ripple/Noise (See Note) See Selection Chart Page 1 60min. each along X, Y, Z axes Over Load Protection 110-150% max. Auto Recovery * Short Circuit Protection Auto Recovery * Transient Response 4mS at FL, 110VAC Start Up Time 2S, min. at FL, 100VAC Hold Up Time 12mS, min. at FL, 100VAC Temperature Coefficient ±0.04%/°C MTBF 100,000 Hrs, min. MIL-HDBK-217F, 25°C Flammability Rating UL94V-1 GENERAL SPECIFICATIONS Isolation I/P-O/P: 4000VAC PHYSICAL SPECIFICATIONS Limit Current <10mA O/P-Ground: 707VDC 60S Size L x W x H (Inches/mm) Weight 2.2” x 1.73” x 1.08” / Insulation Resistance ≥20MΩ, 500V, 1S, I/P to O/P 56 x 44 x 27.5mm Efficiency at FL & Nominal Line See Selection Chart 90g typ. Safety ANSI/AAMI ES60601-1:2005 UL/cUL: 3rd ed. NOTE * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. WWW.ASTRODYNETDI.COM Ripple & Noise is measured by using a 20MHz bandwidth limited oscilloscope and terminating each output with a 0.47uF capacitor at FL and Nominal line. ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 oscilloscope and terminated each output with a 0.47uF capacitor at rated load and nominal line. 6. Hold up time is measured from the end of the last charging pulse to the time which the main output drops down to low limit of main output at rated load and nominal line. 7. Efficiency is measured at rated load, and nominal line. 8. The specifics for testing the energy efficiency of this Series are outlined in a separate document titled "Test Method for Calculating the Energy Efficiency of Single-Voltage Interchangeable AC-DC and AC-AC Power Supplies (August 11, 2004)," which is available on the ENERGY STAR Website. medical rated load and nominal line. 6. Hold up time is50measured from120 the end of the160last charging pulse to220the 80 100 140 180 200 time which the main output drops down to lowINPUT limitVOLTAGE of main(VAC) output at (FIG.1) INPUT VOLTAGE DERATING CURVE rated load and nominal line. 110 7. Efficiency is measured at rated load, and nominal line. 100 8. The specifics for testing the energy efficiency of this Series are outlined 90 in a separate document titled "Test Method for Calculating the Energy 80 Efficiency of Single-Voltage Interchangeable AC-DC and AC-AC Power 70 Supplies (August 11, 2004)," which is available on the ENERGY STAR 60 Website. 50 20 10 110 90 80 70 60 50 40 series 30 20 10 0 -10 0 10W 80 (FIG.2) TEMPERATURE DERATING CURVE MECHANICAL DIMENSIONS: ( UNIT: mm ) SPECIFICATION NOTE : AHP1001B 110 OUTPUT RECOMMEND : load when the power supply starts up. 1. OutputCABLE can provide up to peak 100 1. Selected output connectors and wire, to Appendix. Continuous staying in more than ratedplease load is refer not allowed. 2. HPU10A-101~105 are required to use AWG#20/4FT cable. 2. At factory, in 60% rated load condition, each output isoutput checked to be 90 3. HPU10A-106~112 are required to use AWG#24/4FT output cable. within voltage accuracy. 4. efficiency will be changed by modified 3. The Line regulation regulation and is defined by changing ±10% of input voltageoutput from cable. 80 nominal line at rated load. PACKING : 4. Load regulation is defined by changing ±40% of measured output load 70 1. Net 90g load. approx. fromweight: 60% rated 2. output available contact sales for limited details. 60 5. Optional Ripple & noise is connectors measured by using 20MHz bandwidth OUTPUT CABLE 1R 1. Selected outpu 1 2. HPU10B-101~1 3. HPU10B-106~1 4. The regulation LOAD (%) MECHANICAL DIMENSIONS: 20 30 40 50 60 70 -10 0 10 10W External Medical Grade Power Supply TEMPERATURE (°C) HPU10D series LOAD (%) AHP1001A SPECIFICATION NOTE : UNIT:supply mm ) starts up. 1. Output can provide up to peak load when the( power Continuous staying in more than rated load is not allowed. 2. At factory, in 60% rated load condition, each output is checked to be within voltage accuracy. 3. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load. 4. Load regulation is defined by changing ±40% of measured output load from 60% rated load. 5. Ripple & noise is measured by using 20MHz bandwidth limited oscilloscope and terminated each output with a 0.47uF capacitor at rated load and nominal line. 6. Hold up time is measured from the end of the last charging pulse to the time which the main output drops down to low limit of main output at rated load and nominal line. 7. Efficiency is measured at rated load, and nominal line. 8. The specifics for testing the energy efficiency of this Series are outlined in a separate document titled "Test Method for Calculating the Energy Efficiency of Single-Voltage Interchangeable AC-DC and AC-AC Power Supplies (August 11, 2004)," which is available on the ENERGY STAR Website. 1 100 0 HPU10C series 100 280 medical 30 MECHANICAL DIMENSIONS 260 AHP1001 40 M edi c a l Gr a d e C las s I I 10 Wat t A dapt er 80 240 PACKING : 1. Net weight: 90 2. Optional outpu oscilloscope and terminated each output with a 0.47uF capacitor at rated 100 load and nominal line.160 120 140 180 200 220 240 260 280 6. Hold up time is measured fromINPUT theVOLTAGE end of (VAC) the last charging pulse to the (FIG.1) INPUT VOLTAGE DERATING CURVE CAUTION time which the main output drops down to low limit of main output at 110 rated load and nominal line. 100 7. Efficiency is measured at rated load, and nominal line. 90 8. The specifics for testing the energy efficiency of this Series are outlined 80 in a separate document titled "Test Method for Calculating the Energy 70 Efficiency of Single-Voltage Interchangeable AC-DC and AC-AC Power 60 Supplies (August 11, 2004)," which is available on the ENERGY STAR 50 Website. 40 50 80 1 1 30 Rating Chart: 20 10 (A) 3.0 5.0 1.20 HPU10A-102 5.0 6.0 1.33 HPU10A-103 6.0 8.0 1.00 HPU10A-104 8.0 11.0 0.90 HPU10A-105 11.0 13.0 0.76 HPU10A-106 16.0 16.0 21.0 0.62 0.47 HPU10B-102 6 5.0 66 6.0 2.00 65 1.330.2 121.60 OLP ±5 PACKING : 1.00 6.0 8.0 HPU10B-103 1.60 81. Net weight:5090g approx. 80 0.3 121.33 OLP ±5 1.25 OLP 0.90 11.0 8.0 HPU10B-104 2. Optional output connectors available contact sales for details. ±5 81 0.3 60 8 1.33 12 0.76 13.0 11.0 HPU10B-105 ±5 0.3 83 80 10 1.25 120.90 OLP HPU10B-106 10 0.90 HPU10B-107 10 0.76 HPU10B-108 10 0.62 13.0 100 27.0 100 40.0 0.25 HPU10A-111 40.0 50.0 0.20 HPU10B-112 10 0.25 HPU10A-112 50.0 55.0 0.19 0.20 HPU10A-108 HPU10A-109 21.0 27.0 27.0 33.0 0.37 0.30 86 40.0 100 50.0 100 55.0 ±3 86 ±3 86 100 86 60 10 80 10 100 OLP 10 100 OLP 10 100 OLP 10 100 100 0.370.3 0.300.3 120.47 120.37 OLP 10 0.250.3 0.200.3 120.30 120.25 OLP 10 100 OLP 10 100 0.190.3 120.20 OLP 10 100 12 OLP 0.3 3.0 5.0 1.20 2.00 6HPU10D-101 66 3.0 ±5 HPU10C-102 5.0 6.0 1.33 1.60 8HPU10D-102 50 5.0 ±5 1.00 1.33 60 8HPU10D-103 ±5 6.0 11.0 0.90 1.25 80 10 HPU10D-104 ±5 8.0 83 11.00.3 120.90 OLP 1.25 1 0.90 100 10 HPU10D-105 ±5 11.0 84 13.00.3 120.76 OLP 0.90 1 0.76 100 10 HPU10D-106 ±5 13.0 85 16.00.3 120.62 OLP 0.76 1 WWW.ASTRODYNETDI.COM 8.0 6.0 HPU10C-103 HPU10C-104 8.0 HPU10C-105 11.0 13.0 0.76 HPU10C-106 13.0 16.0 0.62 121.20 ( HPU10C-101 2.00 6 6.0 0.3USA: 1-800-823-8082 1.60 80 121.33 OLP ASTRODYNE 8 65 5.0 0.2 Output Power Adjustment Maximum Adjustment Maximum Adjustable Output Current Output CurrentTo meet these published specs: Voltage Range requires an Output Cord Length of 48” and 20AWG wire (Based on the output volt.) (Based on the outputAHP1001x-01~05 volt.) MODEL NO. AHP1001x-06~12 requires an Output Cord Length pf 48” and 24AWG wire +Vout min max max max min min Any deviation from these requirements will change the Regulation and Efficiency of the product (VDC) (A) (A) (A) (A) (W) (mVp-p) (%) (%) (VDC) (W) (ms) Protection Mode (VDC) 86 50 8 120.76 120.62 Hold-Up Time -Vout max 86 66 8 0.620.3 0.470.3 No Load Consumption MODEL NO. diameter 5.5mm outer 2.1mm inner diameter, min female 11mm length, center “+” (VDC) 85 40.0 ±3 50.0 ±3 Ripple & Noise Adjustable Voltage Range Maximum Output Power Coaxial Plug 33.0 100 27.0 ±5 33.0 ±5 84 (mVp-p Rating Chart: Rating Chart: DC OUTPUT CONNECTIONS 10 21.0 100 16.0 ±5 21.0 ±5 Typ. Efficiency 33.0 HPU10B-109 10 0.47 HPU10B-110 10 0.37 HPU10B-111 10 0.30 16.0 100 Total Regulation HPU10A-110 CAUTIO N HPU10A-107 13.0 1. Selected output connectors and wire, please refer to Appendix. 2. HPU10C-101~105 are(VDC) required to use AWG#20/4FT output (VDC) (A) (A)cable. (W) max 3. HPU10C-106~112 are required to use AWG#24/4FT output cable. HPU10B-101 3.0(mVp-p)and efficiency 5.0 1.20(W)by modified 2.00 4. The regulation will be changed output cable. 6 (A) (W) (%) (%) (ms) CAU TIO N (VDC) OUTPUT CABLE RECOMMEND : MECHANICAL DIMENSIONS: ) min max min ( UNIT: mmmax 80 Protection Mode (VDC) AHP1001D Hold-Up Time min No Load Consumption max Typ. Efficiency HPU10A-101 min Ripple & Noise MECHANICAL DIMENSIONS: MODEL NO. Adjustment Maximum Output CurrentMODEL NO. (Based ( UNIT: mm ) on the output volt.) Maximum Output Power Adjustable AHP1001C Voltage Range Adjustment Maximum Adjustable 20 30 40 50 60 70 10 Output Current TEMPERATURE (°C) Voltage Range(FIG.2) TEMPERATURE DERATING CURVE (Based on the output volt.) 0 Total Regulation -10 Maximum Output Power 0 Ripple & Noise Rating Chart: OLP 81 OLP 1.33 8.0 0.3PACIFIC: 121.00 ASTRODYNE 886-2-26983458 8 AHP1001 M edi c a l Gr a d e C las s I I 10 Wat t A dapt er series DERATING CURVES dical 10A series 10W External Medical Grade Power Supply 110 ak load when the power supply starts up. than rated load is not allowed. condition, each output is checked to be 100 LOAD (%) 90 changing ±10% of input voltage from y changing ±40% of measured output load 80 70 by using 20MHz bandwidth limited d each output with a 0.47uF capacitor at . om the end of the last charging pulse to the t drops down to low limit of main output at . ed load, and nominal line. energy efficiency of this Series are outlined ed "Test Method for Calculating the Energy Interchangeable AC-DC and AC-AC Power " which is available on the ENERGY STAR 60 50 80 100 -10 0 120 140 160 180 200 220 INPUT VOLTAGE (VAC) (FIG.1) INPUT VOLTAGE DERATING CURVE 240 260 280 110 100 90 80 70 60 50 40 30 20 10 0 ENSIONS: ( UNIT: mm ) 10 20 30 40 50 TEMPERATURE (°C) (FIG.2) TEMPERATURE DERATING CURVE 60 70 80 OUTPUT CABLE RECOMMEND : 1. Selected output connectors and wire, please refer to Appendix. 2. HPU10A-101~105 are required to use AWG#20/4FT output cable. 3. HPU10A-106~112 are required to use AWG#24/4FT output cable. 4. The regulation and efficiency will be changed by modified output cable. PACKING : 1. Net weight: 90g approx. 2. Optional output connectors available contact sales for details. Protection Mode Hold-Up Time 0315 No Load Consumption Typ. Efficiency max Total Regulation min Ripple & Noise max (Based on the output volt.) Maximum Output Power Adjustment Maximum WWW.ASTRODYNETDI.COM Output Current Adjustable ltage Range ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458