SP-Cap/ Conductive Polymer Aluminum Capacitors (Specialty Polymer Aluminum Capacitors) Surface Mount Type Series: CS, CT, CX (High Voltage Products) ■ Features ● ● ● ● High voltage. (10 V to 25 V) Low profile (1.1 mm, 1.4 mm, 1.9 mm height) High ripple current (3.2 Ar.m.s.) RoHS directive compliant ■ Specifications CS Series & Size Code CT CX –40 °C to +105 °C Category Temp. Range 10 V.DC to 25 V.DC Rated W.V.Range 10 μF to 47 μF Nominal Cap.Range 22 μF to 68 μF 15 μF to 100 μF Capacitance Tolerance ±20 % (120 Hz / + 20 °C) DC Leakage Current I < 0.3 CV (μA) 2minutes < 0.06 (120 Hz/+20 °C) tan d Rated Working Voltage × 1.25 [10 V.DC to 16 V.DC], × 1.15 [20 V.DC to 25 V.DC](15 °C to 35 °C) Surge Voltage After applying rated working voltage for 2000 hours at 105 °C±2 °C, and then being stabilized at +20 °C, capacitor shall meet the following limits. Endurance Capacitance change ±20% of initial measured value tan d < 200 % of initial specified value DC leakage current < Initial specified value After storing for 500 hours at 60 °C, 90 % Capacitance change of initial measurd value Moisture resistance 10 V.DC to 25 V.DC +60, –20 % tan d < 200 % of initial specified value DC leakage current < Initial specified value ■ Marking ■ Dimensions in mm(not to scale) – (Unit : mm) H + P P L Lot No. W.V. code Series & Size Code W2 Polarity bar (Positive) W2 Cap. W1 L±0.2 W1±0.2 W2±0.1 H P±0.3 CS 7.3 4.3 2.4 1.1±0.1 1.3 CT 7.3 4.3 2.4 1.4±0.1 1.3 CX 7.3 4.3 2.4 1.9±0.2 1.3 ✽ Externals of figure are the reference. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 – EEF-2 – Jul. 2014 SP-Cap/ Conductive Polymer Aluminum Capacitors (Specialty Polymer Aluminum Capacitors) ■ Standard Products Series & Size Code Rated W.V. (V.DC) Capacitance (±20 %) (μF) 10 16 CS Specification ✽1 L (mm) W (mm) H (mm) 47 7.3 4.3 1.1 15 7.3 4.3 1.1 Part number ✽2 Ripple ESR current (Ar.m.s.) (mΩ max.) 3.2 40 3.2 40 ✽4 ✽3 Reflow condition : 260 °C Min. Packaging Q’ty (pcs) EEFCS1A470R 3500 EEFCS1C150R 3500 22 7.3 4.3 1.1 3.2 40 EEFCS1C220R 3500 33 7.3 4.3 1.1 3.2 40 EEFCS1C330R 3500 10 7.3 4.3 1.1 3.2 40 EEFCS1D100R 3500 15 7.3 4.3 1.1 3.2 40 EEFCS1D150R 3500 22 7.3 4.3 1.1 3.2 40 EEFCS1D220R 3500 10 7.3 4.3 1.1 3.2 40 EEFCS1E100R 3500 15 7.3 4.3 1.1 3.2 40 EEFCS1E150R 3500 10 68 7.3 4.3 1.4 3.2 40 EEFCT1A680R 3500 16 47 7.3 4.3 1.4 3.2 40 EEFCT1C470R 3500 20 25 CT Case Size 20 25 10 16 CX 20 25 33 7.3 4.3 1.4 3.2 40 EEFCT1D330R 3500 47 7.3 4.3 1.4 3.2 40 EEFCT1D470R 3500 22 7.3 4.3 1.4 3.2 40 EEFCT1E220R 3500 47 7.3 4.3 1.9 3.2 40 EEFCX1A470R 3500 68 7.3 4.3 1.9 3.2 40 EEFCX1A680R 3500 100 7.3 4.3 1.9 3.2 40 EEFCX1A101R 3500 15 7.3 4.3 1.9 3.2 40 EEFCX1C150R 3500 22 7.3 4.3 1.9 3.2 40 EEFCX1C220R 3500 33 7.3 4.3 1.9 3.2 40 EEFCX1C330R 3500 47 7.3 4.3 1.9 3.2 40 EEFCX1C470R 3500 68 7.3 4.3 1.9 3.2 40 EEFCX1C680R 3500 22 7.3 4.3 1.9 3.2 40 EEFCX1D220R 3500 33 7.3 4.3 1.9 3.2 40 EEFCX1D330R 3500 47 7.3 4.3 1.9 3.2 40 EEFCX1D470R 3500 56 7.3 4.3 1.9 3.2 40 EEFCX1D560R 3500 15 7.3 4.3 1.9 3.2 40 EEFCX1E150R 3500 22 7.3 4.3 1.9 3.2 40 EEFCX1E220R 3500 33 7.3 4.3 1.9 3.2 40 EEFCX1E330R 3500 ✽1: Ripple current (100 kHz/ +45°C ), ✽2: ESR (100 kHz/+20 °C) ✽3: Please refer to the page of “Mouting Specifications”. ✽4: Please contact us when 500 pcs packing is necessary. Temperature Compensation Multipliers for Ripple Current < 45 °C 45 °C < T < 85 °C 85 °C < T < 105 °C 1.0 0.8 0.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 – EEF-3 – Jul. 2014