MM3ZxxxST1G Series, SZMM3ZxxxST1G Series Zener Voltage Regulators 200 mW SOD−323 Surface Mount Tight Tolerance Portfolio http://onsemi.com This series of Zener diodes is packaged in a SOD−323 surface mount package that has a power dissipation of 200 mW. They are designed to provide voltage regulation protection and are especially attractive in situations where space is at a premium. They are well suited for applications such as cellular phones, hand−held portables, and high density PC boards. SOD−323 CASE 477 STYLE 1 Specification Features • Standard Zener Breakdown Voltage Range − 3.3 V to 36 V • Steady State Power Rating of 200 mW • Small Body Outline Dimensions: • • • • • • • − 0.067″ x 0.049″ (1.7 mm x 1.25 mm) Low Body Height: 0.035″ (0.9 mm) Package Weight: 4.507 mg/unit ESD Rating of Class 3 (> 16 kV) per Human Body Model Tight Tolerance VZ AEC−Q101 Qualified and PPAP Capable SZ Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant* Mechanical Characteristics: CASE: Void-free, transfer-molded plastic FINISH: All external surfaces are corrosion resistant MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: 1 Cathode 2 Anode MARKING DIAGRAM XXMG G XX = Specific Device Code M = Date Code* G = Pb−Free Package (Note: Microdot may be in either location) *Date Code orientation may vary depending upon manufacturing location. 260°C for 10 Seconds LEADS: Plated with Pb−Sn or Sn only (Pb−Free) POLARITY: Cathode indicated by polarity band FLAMMABILITY RATING: UL 94 V−0 MOUNTING POSITION: Any ORDERING INFORMATION Package Shipping† MM3ZxxxST1G SOD−323 (Pb−Free) 3,000 / Tape & Reel SZMM3ZxxxST1G SOD−323 (Pb−Free) 3,000 / Tape & Reel MM3ZxxxST3G SOD−323 (Pb−Free) 10,000 / Tape & Reel Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. DEVICE MARKING INFORMATION *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2013 June, 2013 − Rev. 20 1 See specific marking information in the device marking column of the Electrical Characteristics table on page 3 of this data sheet. Publication Order Number: MM3Z2V4ST1/D MM3ZxxxST1G Series, SZMM3ZxxxST1G Series MAXIMUM RATINGS Rating Symbol Total Device Dissipation FR−5 Board, (Note 1) @ TA = 25°C Derate above 25°C Max Unit 200 1.5 mW mW/°C RqJA 635 °C/W TJ, Tstg −65 to +150 °C PD Thermal Resistance from Junction−to−Ambient Junction and Storage Temperature Range Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. FR−4 Minimum Pad. ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 0.9 V Max. @ IF = 10 mA for all types) Symbol Parameter VZ Reverse Zener Voltage @ IZT IZT Reverse Current ZZT Maximum Zener Impedance @ IZT IZK Reverse Current ZZK Maximum Zener Impedance @ IZK IR Reverse Leakage Current @ VR VR Reverse Voltage IF Forward Current VF Forward Voltage @ IF QVZ C I IF VZ VR IR VF IZT Maximum Temperature Coefficient of VZ Zener Voltage Regulator Max. Capacitance @VR = 0 and f = 1 MHz http://onsemi.com 2 V MM3ZxxxST1G Series, SZMM3ZxxxST1G Series ELECTRICAL CHARACTERISTICS (VF = 0.9 Max @ IF = 10 mA for all types) ZZT IZ = IZT @ 10% Mod W Max mA V Min Max C pF Max @ VR = 0 f = 1 MHz Max IR @ VR dVZ/dt (mV/k) @ IZT1 = 5 mA Min Max ZZK IZ = 0.5 mA W Max 5.0 2.90 3.11 1000 100 10 1.0 −3.5 0 450 T5 5.0 3.32 3.53 1000 95 5.0 1.0 −3.5 0 450 MM3Z3V9ST1G T7 5.0 3.89 4.16 1000 90 3.0 1.0 −3.5 −2.5 450 MM3Z4V3ST1G T8 5.0 4.17 4.43 1000 90 3.0 1.0 −3.5 0 450 MM3Z4V7ST1G T9 5.0 4.55 4.75 800 80 3.0 2.0 −3.5 0.2 260 MM3Z5V1ST1G TA 5.0 4.98 5.2 500 60 2.0 2.0 −2.7 1.2 225 MM3Z5V6ST1G TC 5.0 5.49 5.73 200 40 1.0 2.0 −2.0 2.5 200 MM3Z6V2ST1G TE 5.0 6.06 6.33 100 10 3.0 4.0 0.4 3.7 185 MM3Z6V8ST1G TF 5.0 6.65 6.93 160 15 2.0 4.0 1.2 4.5 155 MM3Z7V5ST1G TG 5.0 7.28 7.6 160 15 1.0 5.0 2.5 5.3 140 MM3Z8V2ST1G TH 5.0 8.02 8.36 160 15 0.7 5.0 3.2 6.2 135 MM3Z9V1ST1G TK 5.0 8.85 9.23 160 15 0.5 6.0 3.8 7.0 130 MM3Z10VST1G WB 5.0 9.80 10.20 160 15 0.5 6.0 4.5 8.0 130 MM3Z12VST1G TN 5.0 11.74 12.24 80 25 0.1 8.0 6.0 10 130 MM3Z13VST1G TQ 5.0 12.91 13.49 160 30 0.1 8.0 7.0 11 120 MM3Z15VST1G TP 5.0 14.34 14.98 80 40 0.1 11 8.8 12.7 130 MM3Z16VST1G TU 5.0 15.85 16.51 80 40 0.05 11.2 10.4 14 105 MM3Z18VST1G TW 5.0 17.56 18.35 80 45 0.05 12.6 12.4 16 100 MM3Z22VST1G WP 5.0 21.54 22.47 100 55 0.05 15.4 16.4 20 85 MM3Z24VST1G WT 5.0 23.72 24.78 120 70 0.05 16.8 18.4 22 80 MM3Z27VST1G WQ 5.0 26.19 27.53 300 80 0.05 18.9 21.4 25.3 70 MM3Z33VST1G WR 5.0 32.15 33.79 300 80 0.05 23.2 27.4 33.4 70 MM3Z36VST1G WU 5.0 35.07 36.87 500 90 0.05 25.2 30.4 37.4 70 MM3Z39VST1G WN 2.0 38.22 39.78 500 130 0.05 27.3 33.4 41.2 45 Device Marking Test Current Izt mA MM3Z3V0ST1G T4 MM3Z3V3ST1G Device* Zener Voltage VZ *Include SZ-prefix devices where applicable. http://onsemi.com 3 MM3ZxxxST1G Series, SZMM3ZxxxST1G Series TYPICAL CHARACTERISTICS 1000 TJ = 25°C IZ(AC) = 0.1 IZ(DC) f = 1 kHz IF, FORWARD CURRENT (mA) Z ZT , DYNAMIC IMPEDANCE ( Ω ) 1000 100 100 IZ = 1 mA 10 5 mA 1.0 3.0 75°C 1.0 10 150°C 10 0.4 0.5 1.1 0 V BIAS 1 V BIAS 100 BIAS AT 50% OF VZ NOM 10 IR, LEAKAGE CURRENT ( μ A) 1000 TA = 25°C 100 10 1.0 +150°C 0.1 0.01 + 25°C 0.001 −55°C 0.0001 1.0 1.2 Figure 2. Typical Forward Voltage 1000 C, CAPACITANCE (pF) 0°C 0.6 0.7 0.8 0.9 1.0 VF, FORWARD VOLTAGE (V) VZ, NOMINAL ZENER VOLTAGE Figure 1. Effect of Zener Voltage on Zener Impedance 25°C 4.0 10 0.00001 VZ, NOMINAL ZENER VOLTAGE (V) 5.0 VZ, NOMINAL ZENER VOLTAGE (V) Figure 3. Typical Capacitance Figure 4. Typical Leakage Current 100 0 10 100 80 10 POWER DISSIPATION (%) I Z , ZENER CURRENT (mA) TA = 25°C 1.0 0.1 0.01 0 2.0 4.0 6.0 VZ, ZENER VOLTAGE (V) 8.0 10 60 40 20 0 0 25 50 75 100 TEMPERATURE (°C) 125 Figure 6. Steady State Power Derating Figure 5. Zener Voltage versus Zener Current (VZ Up to 9 V) http://onsemi.com 4 150 MM3ZxxxST1G Series, SZMM3ZxxxST1G Series PACKAGE DIMENSIONS SOD−323 CASE 477−02 ISSUE H NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. LEAD THICKNESS SPECIFIED PER L/F DRAWING WITH SOLDER PLATING. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. 5. DIMENSION L IS MEASURED FROM END OF RADIUS. HE D b 1 2 E MILLIMETERS DIM MIN NOM MAX A 0.80 0.90 1.00 A1 0.00 0.05 0.10 A3 0.15 REF b 0.25 0.32 0.4 C 0.089 0.12 0.177 D 1.60 1.70 1.80 E 1.15 1.25 1.35 L 0.08 HE 2.30 2.50 2.70 A3 A C NOTE 3 L A1 NOTE 5 INCHES NOM MAX 0.035 0.040 0.002 0.004 0.006 REF 0.010 0.012 0.016 0.003 0.005 0.007 0.062 0.066 0.070 0.045 0.049 0.053 0.003 0.090 0.098 0.105 MIN 0.031 0.000 STYLE 1: PIN 1. CATHODE 2. ANODE SOLDERING FOOTPRINT* 0.63 0.025 0.83 0.033 1.60 0.063 2.85 0.112 SCALE 10:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 http://onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MM3Z2V4ST1/D