Spec Sheet INDUCTORS (High Reliability Application) SMD Power Inductors for Automotive / Industrial Applications (NR series H type / V type / S type) NRS6045T680MMGKV Features Item Summary 68μH(±20%), 1100mA, 950mA Lifecycle Stage Mass Production AEC-Q200 qualified Standard packaging quantity (minimum) Taping 1500pcs Products characteristics table External Dimensions -/6060 L 6mm ±0.2 Inductance 68μH(±20%) W 6mm ±0.2 Inductance Measuring Frequency 100kHz H 4.5mm max Rated Current -Saturation Current 1100mA Rated Current -Temperature Rise Current 950mA DC Resistance (max) 0.3952Ω Avg. of DC.Resistance 0.304Ω Self-resonant Frequency (min) 4MHz RoHS Compliance Yes Halogen Free Yes Soldering Method Reflow CaseSize (EIA/JIS) Recommended Land Patterns 2015.03.09 The data is reference only. Electrical characteristics vary depending on environment or measurement condition. TAIYO YUDEN reserves the right to make change to the Date at any time without notice. Before making final selection, please check product specification. http://www.ty-top.com Powered by TCPDF (www.tcpdf.org) Halogen free / RoHS compliant Wire Wound Inductor 2014/11/5 -Electrical Characteristics Data- SMD Power Inductors for Industrial / Automotive Comfort and Safety Applications (NR series S type)(AEC-Q200 qualified) Dimension Length : Width : Height : NRS6045T680MMGKV unit : mm 6.0 + / - 0.2 6.0 + / - 0.2 4.5 max. unit : inch ( 0.236 + / - 0.008 ) ( 0.236 + / - 0.008 ) ( 0.177 max. ) Inductance : 68 uH ( test freq at 0.1MHz ) ohm ( typ / max ) DC Resistance : 0.304 / 0.3952 Saturation Current : 1,100 mA ( max ) Temp. rise Current : 950 mA ( max ) Saturation current typical : 30% reduction from initial L value. AEC-Q200 qualified Temp rise Current typical : Temperature will rise by 40 deg C DC Bias vs Inductance DC Bias vs Temperature 60 Self-temperature rise [deg] Inductance [uH] 150 100 50 0 0 400 800 1200 1600 2000 DC Bias [mA] 50 40 30 20 10 0 0 400 800 1200 1600 2000 DC Bias [mA] Frequency vs Inductance Inductance [uH] 10000 1000 100 10 0.1 1 10 Frequency [MHz] The data is reference only. Electrical characteristics vary depending on environment or measurement condition. TAIYO YUDEN reserves the right to make change to the data at any time without notice. Before making final selection, please check product specification. The products are tested based on the test conditions and methods defined in AEC-Q200. Please consult with TAIYO YUDEN for the details of the product specification and AEC-Q200 test results, etc., and please review and approve TAIYO YUDEN's product specification before ordering.