OPT-155Axxxx 155Mbps 1x9 SC/ST Duplex Optical Transceiver Module for Fast Ethernet, ATM, SONET/SDH STM-1/OC-3 Features： Full Compliance with the Optical Performance Requirements of the ATM 100Mbps and 100 Base-FX Version of IEEE 802.3u. Industry Standard 1x9 Footprint and Duplex SC or ST Connector Interface. Single 5V（OPT-155A1Hxx）or 3.3V （OPT-155A2Hxx）Power Supply. PECL Differential Inputs and Outputs. PECL Receiver Signal Detect Indicator. Wave Solder and Aqueous Wash Process Compatible. RoHS Compliant per Directive 2002/95/EC Description： These PIN / Preamplifier combinations are coupled into a custom quantizer IC which provides the final pulse shaping for the logic output and the Signal Detect function. The data output is differential. The signal detect output is single-ended. The OPT-155AxHxx series are 1x9 optical transceiver modules designed expressly for high-speed communication applications that require rates of up to 155Mbps. They are all compliant with the SONET/SDH standards. The OPT-155AxHxx transceivers are supplied in industry standard 1x9 SIP package style with either duplex SC or duplex ST connector. Moreover the OPT-155AxHx series also include a Signal-Detect circuit that provides PECL logic output state. Application： Multimode Fiber Backbone Links. Fast Ethernet and ATM Compatible. The OPT-155AxHxx series meet Class-1 eye safety standard and effective distance up to 2Km. Multimode Fiber Media Converter. The transmitter sections utilize 1310nm Surface Emitting InGaAsP LEDs. These LEDs are packaged in the optical subassembly portion of the transmitter section. A custom silicon IC that converts differential PECL logical signals into an analog LED driving current then drive it. The receiver sections utilize InGaAs PIN photodiodes coupled into a custom silicon transimpedance preamplifier IC. These are packaged in the optical subassembly portion of receiver. www.deltaww.com DELTA ELECTRONICS, INC. 1 Sep., 2006 Rev.：0E OPT-155Axxxx Absolute Maximum Ratings Parameter Storage Temperature Lead Soldering Temperature Lead Soldering Time Supply Voltage Symbol Ts TSOLD tSOLD VCC Min. -40 Typ. Max. 85 260 10 6 Unit ºC ºC Sec. V Note Symbol Min. 100 0 Typ. 155.52 Max. 200 70 Unit Mbps ºC Note VCC 4.75 3.15 5 3.3 5.25 3.45 V Symbol Min. Typ. Max. Unit VIL-VCC VIH-VCC -1.81 -1.16 -1.48 -0.88 V V VOL-VCC VOH-VCC VSDH-VCC VSDL-VCC -1.95 -1.045 -1.95 -1.045 -1.62 -0.74 -1.62 -0.74 V V V V 0 Recommended Operating Conditions Parameter Data Rate Ambient Operating Temperature Supply Voltage OPT-155A1Hxx OPT-155A2Hxx Note: See ordering information for detail TA 1 Electrical Characteristics Parameter Transmitter Transmitter Data Input Voltage-Low Transmitter Data Input Voltage-High Receiver Data Output Voltage-Low Data Output Voltage-High SD Output Voltage-Low SD Output Voltage-High Note ECL Family ECL Family Optical Characteristics （Data Rate = 155.52Mbps, PRBS=223-1, NRZ, 62.5/125um MMF） Parameter Symbol Min. Typ. Transmitter Supply Current Icc Mean Launch Power 62.5/125μm, NA=0.275 Fiber 50/125μm, NA=0.20 Fiber PO -20 -22.5 E.R. λC σ tr/tf 9 Optical Extinction Ratio Center Wavelength Spectral Width (RMS) Optical Risetime / Falltime Output Eye Diagram Receiver Max. Unit Note 185 165 mA OPT-155A1 Series OPT-155A2 Series -14 -14 dBm dB 1310 nm nm 200 10%～90% 3.0 ns Compliant with ITU-T recommendation G.957 145 120 -31 OPT-155A1 Series OPT-155A2 Series Supply Current Icc Sensitivity Input Optical Wavelength PIN λ Signal Detect-Asserted Signal Detect-DeAsserted PA PD Signal Detect-Hysteresis PA-PD 0.5 dB PO -14 dBm Overload 1100 -45 mA dBm 1600 nm -31 dBm dBm www.deltaww.com DELTA ELECTRONICS, INC. 2 Sep., 2006 Rev.：0E OPT-155Axxxx Notes：The sensitivity should be tested at BER of 1×10-10 or better with an input signal consisting of 155Mb/s, NRZ, PRBS=223-1 and E.R.= 9dB. Mask of the eye diagram for the optical transmit signal www.deltaww.com DELTA ELECTRONICS, INC. 3 Sep., 2006 Rev.：0E OPT-155Axxxx Pin Definition： Functional description PIN Symbol 1 GND 2 RD (+) Receiver Data Out (LVPECL or PECL) 3 RD (-) Receiver Data Out Bar (LVPECL or PECL) 4 SD Receiver Signal Detect (LVPECL or PECL) 5 VccR Receiver Power Supply 6 VccT Transmitter Power Supply 7 TD (-) Transmitter Data In Bar (LVPECL or PECL) 8 TD (+) Transmitter Data In (LVPECL or PECL) 9 GND Receiver Signal Ground Transmitter Signal Ground Pin Descriptions: Pin 1 Receiver Signal Ground, GND Directly connect these pins to the ground plane. Pin 2 Receiver Data Out (LVPECL), RD (+) PECL logic family. Output external biased and internal dc coupled. Pin 3 Receiver Data Out Bar (LVPECL), RD (-) PECL logic family. Output external biased and internal dc coupled. Pin 4 Receiver Signal Detect (LVPECL/TTL), SD PECL/TTL logic family. Normal Operation: Logic “1” Output Fault Condition: Logic”0” Output Pin 5 Receiver Power Supply, VccR Provide +3.3/5V dc power supply. Pin 6 Transmitter Power Supply, VccT Provide +3.3/5V dc power supply. Pin 7 Transmitter Data In Bar (LVPECL), TD (-) Pin 7 Transmitter Data Input (LVPECL), TD (-) Pin 8 Transmitter Data In (LVPECL), TD (+) Pin 8 Transmitter Data Input Bar (LVPECL), TD (+) Pin 9 Transmitter Signal Ground, GND Directly connect these pins to the ground plane. www.deltaww.com DELTA ELECTRONICS, INC. 4 Sep., 2006 Rev.：0E OPT-155Axxxx Recommend Circuit Schematic for Internal DC Coupled Transceivers RX-VCC TX-VCC C3 C5 9 R1 8 7 6 5 4 3 2 1 R9 R3 TX-GND TD+ R5 R7 RX-GND RD+ TD- RDSD TX-VCC RX-VCC R2 R4 R10 Transceiver Top Niew R6 L1 TX-VCC R1=R3=R5=R7=R9=130 Ohm (3.3V), 82 Ohm (5V) R2=R4=R6=R8=R10=82 Ohm (3.3V), 130 Ohm (5V)VCC R8 C3 C1=C2=C3=C5=C6=0.1 uF C1 L2 RX-VCC C4=10 uF C4 L1=L2=1 uH or ferrite inductor C2 www.deltaww.com DELTA ELECTRONICS, INC. 5 Sep., 2006 Rev.：0E OPT-155Axxxx Package Outline： (1) OPT-155AxH1x Series with SC-type Connector www.deltaww.com DELTA ELECTRONICS, INC. 6 Sep., 2006 Rev.：0E OPT-155Axxxx (2) OPT-155AxH4x Series with ST-type Connector www.deltaww.com DELTA ELECTRONICS, INC. 7 Sep., 2006 Rev.：0E OPT-155Axxxx Regulatory Compliance Reference Feature Electromagnetic Interference (EMI) Performance FCC Class B EN 55022 Class B (CISPR 22A) Radio Frequency Electromagnetic Field EN 61000-4-3 (1) Satisfied with electrical characteristics of product spec. IEC 1000-4-3 Electrostatic Discharge to the Duplex LC Receptacle EN 61000-4-2 (2) No physical damage IEC 1000-4-2 IEC 801.2 Electrostatic Discharge to the Electrical Pins MIL-STD-883E Method 3015.7 Eye Safety US FDA CDRH AEL Class 1 CDRH File # 0321539-00 EN 60950: 2000 EN 60825-1: 1994+A11+A2 EN 60825-2: 2000 TUV Certificate No. R50032471 Component Recognition Underwriters Laboratories and UL File # E239394 Canadian Standards Association Joint Component Recognition for Information Technology Equipment Including Electrical Business Equipment Order information： OPT- 155X1X2X3X4X5X6X7 X1: Fiber X5: A: Multi-mode 1310nm X2: Power Supply Voltage and SD Level X6: 1: 5.0V, PECL SD Level 2: 3.3V, PECL SD Level RoHS Compliant Blank: Non-RoHS Compliant R: RoHS Compliant Performance Blank: Old Design A: New Design X7: Temperature X3: Distance Blank: 0 to +70 degree C H: -10 to + 85 degree C T: -40 to + 85 degree C H: 2km, Multi-mode Data Coupling X4: 1: 1x9SC DC/DC 4: 1x9ST DC/DC www.deltaww.com DELTA ELECTRONICS, INC. 8 Sep., 2006 Rev.：0E