SHANGHAI SUNRISE ELECTRONICS CO., LTD. D10SB10 THRU D10SB100 SINGLE PHASE GLASS PASSIVATED SIP BRIDGE RECTIFIER TECHNICAL SPECIFICATION VOLTAGE: 100 TO 1000V CURRENT: 10A FEATURES D10SB • Glass passivated junction chip • Ideal for printed circuit board • Reliable low cost construction utilizing molded plastic technique • Surge overload rating: 200 A peak • High temperature soldering guaranteed: 250oC/10sec/ 0.375" (9.5mm) lead length at 5 lbs tension MECHANICAL DATA • Terminal: Plated leads solderable per MIL-STD 202E, method 208C • Case: UL-94 Class V-O recognized flame retardant epoxy • Polarity: Polarity symbol marked on body • Mounting position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load,derate current by 20%) RATINGS SYMBOL Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current (Ta=70oC) VRRM VRMS VDC D10SB D10SB D10SB D10SB D10SB D10SB UNITS 10 20 40 60 80 100 100 200 400 600 800 1000 V 70 140 280 420 560 700 V 100 200 400 600 800 1000 V IF(AV) 10 A Peak Forward Surge Current (8.3ms single half sine-wave superimposed on rated load) IFSM 200 A Maximum Instantaneous Forward Voltage (at forward current 5.0ADC) VF 1.1 V 5 500 -55 to + 150 µA µA Maximum DC Reverse Current (at rated DC blocking voltage) Ta=25oC o Ta=125 C IR Storage and Operating Junction Temperature TSTG,TJ o C http://www.sse-diode.com