Zowie DF1504S Surface mount glass passivated bridge rectifier Datasheet

DF1502S THRU DF1510S
SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER
Reverse Voltage - 200 to 1000 Volts
Forward Current - 1.5 Amperes
DFS
0.037(0.95)
0.323(8.20)
0.315(8.00)
0.102(2.60)
0.087(2.20)
0.394(10.00)
0.406(10.30)
0.014(0.35)
0.047(1.20)
* Glass passivated chip junctions
* Low Forward Voltage Drop, High Current Capability
* High Surge Current Capability
* Designed for Surface Mount Application
0.008(0.20)
.031(0.8)
.024(0.6)
0.307(7.80)
0.335(8.50)
0.244(6.2)
0.268(6.5)
FEATURES
* Plastic Material-UL Recognition Flammability
4
1
3
2
Classification 94V-0
0.063(1.60)
0.055(1.40)
0.204(5.20)
0.197(5.00)
MECHANICAL DATA
Case : Molded Plastic
Terminals : Tin Plated, solderable per
MIL-STD-750, Method 2026
Polarity : As marked on Case
Weight : 0.38 gram
*Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
o
Ratings at 25 C ambient temperature
SYMBOLS
DF1502S
DF1504S
DF1506S
DF1508S
DF1510S
UNITS
Maximum repetitive peak reverse voltage
VRRM
200
400
600
800
1000
Volts
Maximum RMS voltage
VRMS
140
280
420
560
700
Volts
VDC
200
400
600
800
1000
Volts
unless otherwise specified.
Maximum DC blocking voltage
o
Maximum average forward rectified current @ TA=40 C
Peak forward surge current 8.3ms single half sine-wave
I (AV)
1.5
Amps
IFSM
50
Amps
VF
1.1
Volts
superimposed on rated load (JEDEC Method)
Maximum instantaneous forward voltage @ IF=1.5 A
o
Maximum DC reverse current
@TC=25 C
at rated DC blocking voltage
@TC=125 C
Typical junction capacitance per element (NOTE 1)
Typical thermal resistance, junction to ambient (NOTE 2)
Operating junction and storage temperature range
5
IR
o
CJ
R
pF
25
40
JA
TJ,TSTG
uA
500
-55 to +150
o
C/W
o
C
NOTES : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC.
(2) Thermal resistance from junction to ambient measured on P.C.B. with 5.0*0.5" (13*13mm) copper pads.
REV. 1
Zowie Technology Corporation
RATINGS AND CHARACTERISTIC CURVES DF1502S THRU DF1510S
FIG.1 - FORWARD CURRENT DERATING CURVE
FIG.2 - MAXIMUM NON-REPETITIVE
PEAK FORWARD SURGE CURRENT
60
PEAK FORWARD SURGE CURRENT,
AMPERES
AVERAGE FORWARD RECTIFIED
CURRENT, AMPERES
2.0
1.5
1.0
0.5
Pulse Width 8.3ms
Single Half-Sire-Wave
(JEDEC Method)
50
40
30
20
10
0
0
0
50
100
1
150
10
o
100
NUMBER OF CYCLES AT 60Hz
AMBIENT TEMPERATURE, C
60 Hz Resistive or
Inductive load
FIG.3 - TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
FIG.4 - TYPICAL REVERSE CHARACTERISTICS
PER BRIDGE ELEMENT
100
INSTANTANEOUS REVERSE CURRENT,
MICROAMPERES
IINSTANTANEOUS FORWARD CURRENT,
AMPERES
10.00
1.00
0.10
o
TJ=125 C
10.0
1.0
o
TJ=25 C
0.10
o
TJ=25 C
PULSE WIDTH=300uS
0.01
0.01
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
0
20
40
60
80
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE,%
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
FIG.5 - TYPICAL JUNCTION CAPACITANCE
100
o
JUNCTION CAPACITANCE, pF
TJ=25 C
10
1
.1
.2
.4
1.0
2
4
10
20
40
100
REVERSE VOLTAGE, VOLTS
REV. 1
Zowie Technology Corporation
Similar pages