ESD7321 ESD Protection Diodes Low Capacitance ESD Protection Diode for High Speed Data Lines The ESD7321 ESD protection diodes are designed to protect high speed data lines from ESD. Low capacitance and low ESD clamping voltage make this device an ideal solution for protecting voltage sensitive high speed data lines. www.onsemi.com MARKING DIAGRAM Features • Low Capacitance (0.5 pF Max, I/O to GND) • Protection for the Following IEC Standards: IEC 61000−4−2 (Level 4) Low ESD Clamping Voltage These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant Typical Applications • • • • X3DFN2 CASE 152AF T • • PIN 1 M T = Specific Device Code (Rotated 90° clockwise) M = Date Code PIN CONFIGURATION AND SCHEMATIC USB 3.x MHL 2.0 SATA/SAS PCI Express 1 MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) 2 ORDERING INFORMATION Rating Symbol Value Unit Operating Junction Temperature Range TJ −55 to +125 °C Storage Temperature Range Tstg −55 to +150 °C Lead Solder Temperature − Maximum (10 Second Duration) TL 260 °C IEC 61000−4−2 Contact (ESD) IEC 61000−4−2 Air (ESD) ESD ESD ±15 ±15 kV kV Device ESD7321MUT5G Package Shipping† X3DFN2 (Pb−Free) 15000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. © Semiconductor Components Industries, LLC, 2015 February, 2015 − Rev. 1 1 Publication Order Number: ESD7321/D ESD7321 ELECTRICAL CHARACTERISTICS I (TA = 25°C unless otherwise noted) IPP Parameter Symbol IPP Maximum Reverse Peak Pulse Current VC Clamping Voltage @ IPP VRWM IR IR VRWM VBR VC IT Working Peak Reverse Voltage V Maximum Reverse Leakage Current @ VRWM VBR IT IT VC VBR VRWM IR Breakdown Voltage @ IT IPP Test Current Bi−Directional ESD *See Application Note AND8308/D for detailed explanations of datasheet parameters. ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Parameter Reverse Working Voltage Breakdown Voltage Symbol Condition Min Typ VRWM VBR IT = 1 mA (Note 1) Max Unit 7.0 V 8.0 Reverse Leakage Current IR VRWM = 7.0 V, I/O to GND Clamping Voltage VC IPP = 8 A − (IEC61000−4−2 Level 2 Equivalent (±4 kV Contact, ±8 kV Air)) ESD Clamping Voltage VC Per IEC 61000−4−2 Junction Capacitance CJ VR = 0 V, f = 1 MHz Dynamic Resistance RDYN V 200 18 nA V See Figures 1 and 2 0.5 TLP Pulse 1 pF W Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 1. Breakdown voltage is tested from pin 1 to 2 and pin 2 to 1. Figure 1. ESD Clamping Voltage Screenshot Positive 8 kV Contact per IEC61000−4−2 Figure 2. ESD Clamping Voltage Screenshot Negative 8 kV Contact per IEC61000−4−2 www.onsemi.com 2 ESD7321 TYPICAL CHARACTERISTICS Figure 4. CV Characteristics 20 0 18 −2 16 −4 14 −6 CURRENT (A) CURRENT (A) Figure 3. IV Characteristics 12 10 8 −8 −10 −12 6 −14 4 −16 2 −18 0 0 5 10 15 20 VOLTAGE (V) 25 −20 −30 30 Figure 5. Positive TLP I−V Curve −25 −20 −15 −10 VOLTAGE (V) −5 Figure 6. Negative TLP I−V Curve www.onsemi.com 3 0 ESD7321 IEC61000−4−2 Waveform IEC 61000−4−2 Spec. Ipeak Level Test Voltage (kV) First Peak Current (A) Current at 30 ns (A) Current at 60 ns (A) 1 2 7.5 4 2 2 4 15 8 4 3 6 22.5 12 6 4 8 30 16 8 100% 90% I @ 30 ns I @ 60 ns 10% tP = 0.7 ns to 1 ns Figure 7. IEC61000−4−2 Spec Transmission Line Pulse (TLP) Measurement L Transmission Line Pulse (TLP) provides current versus voltage (I−V) curves in which each data point is obtained from a 100 ns long rectangular pulse from a charged transmission line. A simplified schematic of a typical TLP system is shown in Figure 8. TLP I−V curves of ESD protection devices accurately demonstrate the product’s ESD capability because the 10s of amps current levels and under 100 ns time scale match those of an ESD event. This is illustrated in Figure 9 where an 8 kV IEC 61000−4−2 current waveform is compared with TLP current pulses at 8 A and 16 A. A TLP I−V curve shows the voltage at which the device turns on as well as how well the device clamps voltage over a range of current levels. S Attenuator ÷ 50 W Coax Cable 10 MW IM 50 W Coax Cable VM DUT VC Oscilloscope Figure 8. Simplified Schematic of a Typical TLP System Figure 9. Comparison Between 8 kV IEC 61000−4−2 and 8 A and 16 A TLP Waveforms www.onsemi.com 4 ESD7321 PACKAGE DIMENSIONS X3DFN2, 0.62x0.32, 0.355P, (0201) CASE 152AF ISSUE A NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. A B D PIN 1 INDICATOR (OPTIONAL) DIM A A1 b D E e L2 E TOP VIEW 0.05 C MILLIMETERS MIN MAX 0.25 0.33 −−− 0.05 0.22 0.28 0.58 0.66 0.28 0.36 0.355 BSC 0.17 0.23 A 0.05 C 2X A1 SIDE VIEW C RECOMMENDED MOUNTING FOOTPRINT* SEATING PLANE 0.74 e 2X 1 1 b 2 2X 2X 0.05 M 2X 0.30 0.05 L2 M 0.31 C A B DIMENSIONS: MILLIMETERS C A B See Application Note AND8398/D for more mounting details BOTTOM VIEW *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative ESD7321/D