Formosa MS Axial Leaded Fast Recovery Rectifiers FR101G THRU FR107G List List................................................................................................. 1 Package outline............................................................................... 2 Features.......................................................................................... 2 Mechanical data............................................................................... 2 Maximum ratings .............................................................................. 2 Rating and characteristic curves........................................................ 3 Pinning information........................................................................... 4 Marking........................................................................................... 4 Taping & bulk specifications for AXIAL devices.................................... 4 Suggested thermal profiles for soldering processes............................. 5 High reliability test capabilities........................................................... 6 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 1 Document ID Issued Date Revised Date DS-222214 2008/02/10 2010/03/10 Revision C Page. 6 Formosa MS Axial Leaded Fast Recovery Rectifiers FR101G THRU FR107G 1.0A Axial Leaded Fast Recovery Rectifiers - 50V-1000V Package outline DO-41 Features • Axial lead type devices for through hole design. • High current capability. • Fast switching for high efficiency. • High surge current capability. • Glass passivated chip junction structure • Lead-free parts meet RoHS requirments. • Suffix "-H" indicates Halogen-free parts, ex. FR101G-H. 1.0(25.4) MIN. .107(2.7) .080(2.0) DIA. .205(5.2) .166(4.2) Mechanical data • Epoxy : UL94-V0 rated flame retardant • Case : Molded plastic, DO-41 • Lead : Axial leads, solderable per MIL-STD-202, 1.0(25.4) MIN. .034(.9) .028(.7) DIA. Method 208 guranteed • Polarity: Color band denotes cathode end • Mounting Position : Any • Weight : Approximated 0.33 gram Dimensions in inches and (millimeters) Maximum ratings and Electrical Characteristics (AT PARAMETER T A=25 oC unless otherwise noted) CONDITIONS Forward rectified current See Fig.1 Forward surge current 8.3ms single half sine-wave (JEDEC methode) V R = V RRM T J = 25 OC Reverse current f=1MHz and applied 4V DC reverse voltage Storage temperature IO 1.0 A I FSM 30 A V RMS*2 (V) *3 VR (V) FR101G 50 35 50 FR102G 100 70 100 FR103G 200 140 200 FR104G 400 280 400 FR105G 600 420 600 FR106G 800 560 800 FR107G 1000 700 1000 *4 VF (V) TYP. 5.0 Operating temperature T J, ( OC) *5 t rr (ns) 100 CJ T STG *1 V RRM (V) SYMBOLS UNIT MIN. IR V R = V RRM T J = 125 OC Diode junction capacitance MAX. Symbol pF 15 +175 -65 μA O C *1 Repetitive peak reverse voltage *2 RMS voltage 150 1.30 *3 Continuous reverse voltage -55 to +150 250 *4 Maximum forward voltage@I F=1.0A *5 Maximum Reverse recovery time, note 1 500 Note 1. Reverse recovery time test condition, I F =0.5A, I R =1.0A, I RR =0.25A http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 2 Document ID Issued Date Revised Date DS-222214 2008/02/10 2010/03/10 Revision C Page. 6 Rating and characteristic curves (FR101G THRU FR107G) Peak Forward Surge Current Amperes Average Forward Current Amperes 1.2 Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Fig.1 - Forward Current Derating Curve 1.0 0.8 0.6 0.4 0.2 single phase half wave 60Hz resistive or inductive load 0 25 50 75 100 125 150 100 10 1 1 8.3mS single half sine-wave (JEDEC Method) 10 Instantaneous Forward Current, Amperes 10 100 Number of Cycles at 60 Hz Ambient Temperature, T A (° C) Fig. 4 - Test Circuit Diagram and Reverse Recovery Time Characteristic Fig. 3 - Typical Instantaneous Forward Characteristics 50W NONINDUCTIVE 10W NONINDUCTIVE T J =25°C ( ) (+) 1.0 D.U.T. 25Vdc (approx.) PULSE GENERATOR (NOTE 2) ( ) (+) 1W NONINDUCTIVE 0.1 OSCILLISCOPE (NOTE 1) NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 2. Rise Time= 10ns max., Source Impedance= 50 ohms. pulse width=300μs 1% duty cycle 0.01 trr 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 | | | | | | | | +0.5A Instantaneous Forward Voltage, Volts 0 -0.25A Fig. 5 - Typical Junction Capacitance Junction Capacitance, pF 100 -1.0A 1cm SET TIME BASE FOR 50 / 10ns / cm 10 TJ=25°C f=1.0MHz Vsig=50mVp-p 1 1.0 10 100 Reverse Voltage, Volts http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 3 Document ID Issued Date Revised Date DS-222214 2008/02/10 2010/03/10 Revision C Page. 6 Formosa MS Axial Leaded Fast Recovery Rectifiers FR101G THRU FR107G Pinning information Pin Pin1 Pin2 Simplified outline cathode anode Symbol 1 2 1 2 Marking Type number FR101G FR102G FR103G FR104G FR105G FR106G FR107G Marking code FR101G FR102G FR103G FR104G FR105G FR106G FR107G Taping & bulk specifications for AXIAL devices 52.4mm 17mm DIA. 55mm Max. A 17mm DIA. 72mm DIA. 71mm Max. 355mm OFF Center both sids 1.0mm Max OFF Alignment 1.2mm 6.3mm REEL PACKING DEVICE Q'TY 1 COMPONENT CARTON Q'TY 2 APPROX. CASE (PCS / REEL) SPACING SIZE (PCS / CARTON) CROSS "A" in FIG. A (m/m) TYPE DO-41 5,000 5 mm 360 * 340 * 370 WEIGHT(kg) 20,000 10.8 AMMO PACKING DEVICE Q'TY 1 INNER CARTON Q'TY 2 APPROX. CASE (PCS / BOX) BOX SIZE SIZE (PCS / CARTON) CROSS (m/m) (m/m) TYPE DO-41 5,000 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 260 * 83 * 160 440 * 270 * 340 Page 4 WEIGHT(kg) 50,000 20.0 Document ID Issued Date Revised Date DS-222214 2008/02/10 2010/03/10 Revision C Page. 6 Formosa MS Axial Leaded Fast Recovery Rectifiers FR101G THRU FR107G BULK PACKING DEVICE Q'TY 1 INNER CARTON Q'TY 2 APPROX. CASE (PCS / BOX) BOX SIZE SIZE (PCS / CARTON) CROSS TYPE (m/m) DO-41 1,000 WEIGHT(kg) (m/m) 194 * 84 * 20 465 * 220 * 260 50,000 20.6 Suggested thermal profiles for soldering processes 1.Lead free temperature profile wave-soldering 280 Peak soldering temperature not to exceed 260ºC 260 240 220 Temperature(°C) 200 180 160 140 120 Peak Max well time 5 Max 100 80 Cool Down Max gradient-4ºC/s Suggested gradient - 2ºC/s or less 60 40 20 Preheat Max gradient 2ºC/s 0 0 20 40 60 80 100 120 140 160 180 200 220 240 Time(Sec) http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 5 Document ID Issued Date Revised Date DS-222214 2008/02/10 2010/03/10 Revision C Page. 6 Formosa MS Axial Leaded Fast Recovery Rectifiers FR101G THRU FR107G High reliability test capabilities Item Test Conditions Reference o 1. Solder Resistance at 260±5 C for 10±2sec. immerse body into solder 1/16"±1/32" MIL-STD-750D METHOD-2031 2. Solderability at 245±5 oC for 5 sec. MIL-STD-202F METHOD-208 3. Pull Test 1.0kg in axial lead direction for 10 sec. I F=I O 4. Bend Lead 5. High Temperature Reverse Bias 6. Forward Operation Life 7. Intermittent Operation Life 8. Pressure Cooker MIL-STD-202F METHOD-211A 1.0kg weight applied to each lead bending arc 90 o±5 o for 3 times MIL-STD-202F METHOD-211A V R=80% rate at T J=150 oC for 168 hrs. MIL-STD-750D METHOD-1038 Rated average rectifier current at T A=25 oC for 500hrs. MIL-STD-750D METHOD-1027 T A = 25 OC, I F = I O On state: power on for 5 min. off state: power off for 5 min, on and off for 500 cycles. MIL-STD-750D METHOD-1036 JESD22-A102 15P SIG at T A=121 oC for 4 hrs. MIL-STD-750D METHOD-1051 9. Temperature Cycling -55 oC to +125 oC dwelled for 30 min. and transferred for 5min. total 10 cycles. 10. Forward Surge 8.3ms single half sine-wave one surge. MIL-STD-750D METHOD-4066-2 11. Humidity at T A=85 oC, RH=85% for 1000hrs. MIL-STD-750D METHOD-1021 12. High Temperature Storage Life at 175 oC for 1000 hrs. MIL-STD-750D METHOD-1031 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 6 Document ID Issued Date Revised Date DS-222214 2008/02/10 2010/03/10 Revision C Page. 6