ON NTD2955G Â 60 v, â 12 a, pâ channel dpak Datasheet

NTD2955, NTD2955P,
NVD2955
Power MOSFET
−60 V, −12 A, P−Channel DPAK
This Power MOSFET is designed to withstand high energy in the
avalanche and commutation modes. Designed for low−voltage, high−
speed switching applications in power supplies, converters, and power
motor controls. These devices are particularly well suited for bridge
circuits where diode speed and commutating safe operating areas are
critical and offer an additional safety margin against unexpected
voltage transients.
http://onsemi.com
V(BR)DSS
RDS(on) TYP
ID MAX
−60 V
155 mW @ −10 V, 6 A
−12 A
P−Channel
Features
D
• Avalanche Energy Specified
• IDSS and VDS(on) Specified at Elevated Temperature
• Designed for Low−Voltage, High−Speed Switching Applications and
MARKING DIAGRAMS
4
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Drain−to−Source Voltage
Gate−to−Source Voltage
− Continuous
− Non−repetitive (tp ≤ 10 ms)
Drain Current
Drain Current − Continuous @ Ta = 25°C
Drain Current − Single Pulse (tp ≤ 10 ms)
Symbol
Value
Unit
VDSS
−60
Vdc
VGS
VGSM
± 20
± 25
Vdc
Vpk
ID
IDM
−12
−18
Adc
Apk
Total Power Dissipation @ Ta = 25°C
PD
55
W
Operating and Storage Temperature
Range
TJ, Tstg
−55 to
175
°C
EAS
216
mJ
Single Pulse Drain−to−Source Avalanche
Energy − Starting TJ = 25°C
(VDD = 25 Vdc, VGS = 10 Vdc, Peak
IL = 12 Apk, L = 3.0 mH, RG = 25 W)
Thermal Resistance
− Junction−to−Case
− Junction−to−Ambient (Note 1)
− Junction−to−Ambient (Note 2)
Maximum Lead Temperature for Soldering
Purposes, 1/8 in. from case for
10 seconds
RqJC
RqJA
RqJA
2.73
71.4
100
°C/W
TL
260
°C
October, 2012 − Rev. 12
1
4
Drain
4
Drain
3
DPAK
CASE 369C
STYLE 2
2
2
1
1
3
3
Drain
Drain
Gate
Source Gate
Source
4
1
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. When surface mounted to an FR4 board using 1 in pad size
(Cu area = 1.127 in2).
2. When surface mounted to an FR4 board using the minimum recommended
pad size (Cu area = 0.412 in2).
© Semiconductor Components Industries, LLC, 2012
1 2
4
Drain
YWW
NT
2955G
Rating
YWW
NTP
2955G
•
S
YWW
NT
2955G
•
G
to Withstand High Energy in the Avalanche and Commutation Modes
NVD Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q101
Qualified and PPAP Capable
These Devices are Pb−Free and are RoHS Compliant
2
3
DPAK−3
CASE 369D
STYLE 2
Y
WW
G
1 2 3
Gate Drain Source
= Year
= Work Week
= Pb−Free Package
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 6 of this data sheet.
Publication Order Number:
NTD2955/D
NTD2955, NTD2955P, NVD2955
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted)
Symbol
Characteristic
Min
Typ
Max
Unit
−60
−
−
67
−
−
−
−
−
−
−10
−100
−
−
−100
−2.0
−
−2.8
4.5
−4.0
−
−
0.155
0.180
−1.86
−
−2.6
−2.0
8.0
−
Mhos
pF
OFF CHARACTERISTICS
Drain−to−Source Breakdown Voltage (Note 3)
(VGS = 0 Vdc, ID = −0.25 mA)
(Positive Temperature Coefficient)
V(BR)DSS
Zero Gate Voltage Drain Current
(VGS = 0 Vdc, VDS = −60 Vdc, TJ = 25°C)
(VGS = 0 Vdc, VDS = −60 Vdc, TJ = 150°C)
IDSS
Gate−Body Leakage Current (VGS = ± 20 Vdc, VDS = 0 Vdc)
IGSS
Vdc
mV/°C
mAdc
nAdc
ON CHARACTERISTICS (Note 3)
Gate Threshold Voltage
(VDS = VGS, ID = −250 mAdc)
(Negative Temperature Coefficient)
VGS(th)
Static Drain−Source On−State Resistance
(VGS = −10 Vdc, ID = −6.0 Adc)
RDS(on)
Drain−to−Source On−Voltage
(VGS = −10 Vdc, ID = −12 Adc)
(VGS = −10 Vdc, ID = −6.0 Adc, TJ = 150°C)
VDS(on)
Forward Transconductance (VDS = 10 Vdc, ID = 6.0 Adc)
gFS
Vdc
mV/°C
W
Vdc
DYNAMIC CHARACTERISTICS
Input Capacitance
Output Capacitance
(VDS = −25 Vdc, VGS = 0 Vdc,
F = 1.0 MHz)
Reverse Transfer Capacitance
Ciss
−
500
750
Coss
−
150
250
Crss
−
50
100
td(on)
−
10
20
tr
−
45
85
td(off)
−
26
40
tf
−
48
90
SWITCHING CHARACTERISTICS (Notes 3 and 4)
Turn−On Delay Time
Rise Time
Turn−Off Delay Time
(VDD = −30 Vdc, ID = −12 A,
VGS = −10 V, RG = 9.1 W)
Fall Time
Gate Charge
(VDS = −48 Vdc, VGS = −10 Vdc,
ID = −12 A)
QT
−
15
30
QGS
−
4.0
−
QGD
−
7.0
−
−
−
−1.6
−1.3
−2.5
−
trr
−
50
ta
−
40
−
tb
−
10
−
QRR
−
0.10
−
ns
nC
DRAIN−SOURCE DIODE CHARACTERISTICS (Note 3)
VSD
Diode Forward On−Voltage
(IS = 12 Adc, VGS = 0 V)
(IS = 12 Adc, VGS = 0 V, TJ = 150°C)
Reverse Recovery Time
(IS = 12 A, dIS/dt = 100 A/ms ,VGS = 0 V)
Reverse Recovery Stored Charge
3. Indicates Pulse Test: Pulse Width ≤ 300 ms, Duty Cycle ≤ 2%.
4. Switching characteristics are independent of operating junction temperature.
http://onsemi.com
2
Vdc
ns
mC
NTD2955, NTD2955P, NVD2955
TYPICAL PERFORMANCE CURVES (TJ = 25°C unless otherwise noted)
VGS = -10 V
TJ = 25°C
-9 V
-8 V
-9.5 V
20
−ID, DRAIN CURRENT (A)
−ID, DRAIN CURRENT (A)
25
-7 V
-6.5 V
15
-6 V
10
-5.5 V
-5 V
5
0
0
1
2
3
4
5
6
7
8
9
−VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS)
24
22
20
25°C
12
10
8
6
4
2
2
4
6
8
3
5
7
9
−VGS, GATE−TO−SOURCE VOLTAGE (VOLTS)
0.35
TJ = 125°C
0.25
25°C
0.15
-55°C
0.10
0.05
0
0
3
9
18
6
15
12
−ID, DRAIN CURRENT (AMPS)
21
24
RDS(on), DRAIN−TO−SOURCE RESISTANCE (Ω)
0.40
0.250
TJ = 25°C
0.225
0.200
VGS = −10 V
0.175
0.150
-15 V
0.125
0.100
0.075
0.050
0
Figure 3. On−Resistance versus Drain Current
and Temperature
2.0
1.8
1.6
3
9
18
6
12
15
-ID, DRAIN CURRENT (AMPS)
21
24
Figure 4. On−Resistance versus Drain Current
and Gate Voltage
1000
VGS = 0 V
VGS = −10 V
ID = −6 A
−IDSS, LEAKAGE (nA)
RDS(on), DRAIN−TO−SOURCE RESISTANCE (Ω)
RDS(on), DRAIN−TO−SOURCE RESISTANCE (NORMALIZED)
VGS = −10 V
0.20
10
Figure 2. Transfer Characteristics
0.50
0.30
125°C
18
Figure 1. On−Region Characteristics
0.45
TJ = -55°C
16
14
0
10
VDS ≥ −10 V
1.4
1.2
1.0
0.8
0.6
0.4
100
TJ = 125°C
10
100°C
0.2
0
-50
-25
0
25
50
75
100 125
TJ, JUNCTION TEMPERATURE (°C)
150
1
175
5
Figure 5. On−Resistance Variation with
Temperature
10 15 20 25 30 35 40 45 50 55
−VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS)
Figure 6. Drain−To−Source Leakage
Current versus Voltage
http://onsemi.com
3
60
C, CAPACITANCE (pF)
1000
800
VDS = 0 V
VGS = 0 V
TJ = 25°C
Ciss
Crss
Ciss
400
Coss
200
Crss
5
0
5
-VGS
10
15
20
25
ID = 12 A
TJ = 25°C
VDS
12.5
600
0
10
15
QT
10
60
50
40
VGS
7.5
30
QGD
QGS
5
20
2.5
10
0
0
2
4
6
8
10
12
0
16
14
−VDS, DRAIN−TO−SOURCE VOLTAGE (V)
1200
−VGS, GATE−TO−SOURCE VOLTAGE (V)
NTD2955, NTD2955P, NVD2955
QT, TOTAL GATE CHARGE (nC)
-VDS
GATE−TO−SOURCE OR DRAIN−TO−SOURCE VOLTAGE (V)
Figure 8. Gate−To−Source and Drain−To−Source
Voltage versus Total Charge
Figure 7. Capacitance Variation
15
VDD = −30 V
ID = −12 A
VGS = −10 V
TJ = 25°C
−IS, SOURCE CURRENT (AMPS)
t, TIME (ns)
1000
100
tf
tr
td(off)
td(on)
10
1
1
10
VGS = 0 V
TJ = 25°C
10
5
0
100
RG, GATE RESISTANCE (W)
0
0.5
0.25
1
0.75
1.25
1.5
1.75
−VSD, SOURCE−TO−DRAIN VOLTAGE (V)
Figure 10. Diode Forward Voltage versus Current
Figure 9. Resistive Switching Time
Variation versus Gate Resistance
ID, DRAIN CURRENT (AMPS)
100
VGS = −15 V
SINGLE PULSE
TC = 25°C
10
di/dt
100 ms
IS
1 ms
0.1
0.1
trr
10 ms
1
dc
ta
RDS(on) LIMIT
THERMAL LIMIT
PACKAGE LIMIT
1
tb
TIME
0.25 IS
tp
10
100
IS
−VDS, DRAIN−TO−SOURCE VOLTAGE (V)
Figure 12. Diode Reverse Recovery Waveform
Figure 11. Maximum Rated Forward Biased
Safe Operating Area
http://onsemi.com
4
NTD2955, NTD2955P, NVD2955
r(t), NORMALIZED EFFECTIVE
TRANSIENT THERMAL RESISTANCE
1.0
D = 0.5
0.2
0.1
P(pk)
0.1 0.05
0.02
t1
0.01
t2
DUTY CYCLE, D = t1/t2
SINGLE PULSE
0.01
1.0E-05
1.0E-04
1.0E-03
1.0E-02
t, TIME (s)
Figure 13. Thermal Response
http://onsemi.com
5
1.0E-01
RqJC(t) = r(t) RqJC
D CURVES APPLY FOR POWER
PULSE TRAIN SHOWN
READ TIME AT t1
TJ(pk) - TC = P(pk) RqJC(t)
1.0E+00
1.0E+01
NTD2955, NTD2955P, NVD2955
ORDERING INFORMATION
Package
Shipping†
NTD2955G
DPAK
(Pb−Free)
75 Units / Rail
NTD2955−1G
IPAK
(Pb−Free)
75 Units / Rail
NTD2955T4G
DPAK
(Pb−Free)
NTD2955PT4G
DPAK
(Pb−Free)
NVD2955T4G*
DPAK
(Pb−Free)
Device
2500 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*NVD Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP
Capable.
http://onsemi.com
6
NTD2955, NTD2955P, NVD2955
PACKAGE DIMENSIONS
DPAK (SINGLE GAUGE)
CASE 369C
ISSUE D
A
E
b3
c2
B
Z
D
1
L4
A
4
L3
b2
e
2
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: INCHES.
3. THERMAL PAD CONTOUR OPTIONAL WITHIN DIMENSIONS b3, L3 and Z.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD
FLASH, PROTRUSIONS, OR BURRS. MOLD
FLASH, PROTRUSIONS, OR GATE BURRS SHALL
NOT EXCEED 0.006 INCHES PER SIDE.
5. DIMENSIONS D AND E ARE DETERMINED AT THE
OUTERMOST EXTREMES OF THE PLASTIC BODY.
6. DATUMS A AND B ARE DETERMINED AT DATUM
PLANE H.
C
H
DETAIL A
3
c
b
0.005 (0.13)
M
H
C
L2
GAUGE
PLANE
C
L
SEATING
PLANE
A1
L1
DETAIL A
ROTATED 905 CW
2.58
0.102
5.80
0.228
3.00
0.118
1.60
0.063
INCHES
MIN
MAX
0.086 0.094
0.000 0.005
0.025 0.035
0.030 0.045
0.180 0.215
0.018 0.024
0.018 0.024
0.235 0.245
0.250 0.265
0.090 BSC
0.370 0.410
0.055 0.070
0.108 REF
0.020 BSC
0.035 0.050
−−− 0.040
0.155
−−−
STYLE 2:
PIN 1. GATE
2. DRAIN
3. SOURCE
4. DRAIN
SOLDERING FOOTPRINT*
6.20
0.244
DIM
A
A1
b
b2
b3
c
c2
D
E
e
H
L
L1
L2
L3
L4
Z
6.17
0.243
SCALE 3:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
7
MILLIMETERS
MIN
MAX
2.18
2.38
0.00
0.13
0.63
0.89
0.76
1.14
4.57
5.46
0.46
0.61
0.46
0.61
5.97
6.22
6.35
6.73
2.29 BSC
9.40 10.41
1.40
1.78
2.74 REF
0.51 BSC
0.89
1.27
−−−
1.01
3.93
−−−
NTD2955, NTD2955P, NVD2955
PACKAGE DIMENSIONS
IPAK
CASE 369D
ISSUE C
C
B
V
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
E
R
4
A
S
1
2
DIM
A
B
C
D
E
F
G
H
J
K
R
S
V
Z
Z
3
−T−
SEATING
PLANE
K
J
F
D
G
H
3 PL
0.13 (0.005)
M
INCHES
MIN
MAX
0.235 0.245
0.250 0.265
0.086 0.094
0.027 0.035
0.018 0.023
0.037 0.045
0.090 BSC
0.034 0.040
0.018 0.023
0.350 0.380
0.180 0.215
0.025 0.040
0.035 0.050
0.155
−−−
MILLIMETERS
MIN
MAX
5.97
6.35
6.35
6.73
2.19
2.38
0.69
0.88
0.46
0.58
0.94
1.14
2.29 BSC
0.87
1.01
0.46
0.58
8.89
9.65
4.45
5.45
0.63
1.01
0.89
1.27
3.93
−−−
STYLE 2:
PIN 1. GATE
2. DRAIN
3. SOURCE
4. DRAIN
T
SOLDERING FOOTPRINT*
6.20
0.244
3.0
0.118
2.58
0.101
5.80
0.228
1.6
0.063
6.172
0.243
SCALE 3:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
8
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NTD2955/D
Similar pages