Token CCR222MJP Ccr carbon composition resistor Datasheet

TOKEN
CCR Carbon Composition Resistors
Carbon Composition
Resistors
The High Pulse Withstanding Carbon Composition Resistors
Handle Big Peaks and Pulses
Preview
The high pulse withstanding capability of the CCR series
of carbon composition resistors from Token Electronics
offers designers a compact solution for applications
involving high voltages and high-energy pulses.
Though, many resistor manufacturers claim to offer carbon
composition replacements. However, these wirewound or
thick film alternatives do not fully match the pulse
performance and low inductance of carbon composition.
Token’s CCR series now offers the industry a carbon
composition resistor made up of a solid rod of conductive
composite material, the chemical composition of which is
altered to produce different resistance values.
The main advantage of carbon composition is their pulse handling capability. This is due to the fact that the entire
rod conducts and so the thermal mass is far higher, which results in a higher energy capability. Due to the need
for higher peak voltages, the CCR range is perfect for vehicle ignition system applications, medical monitoring
equipment and as output resistors in defibrillators.
The standard carbon composition CCR resistor offers a power rating of 1/4W and 1/2W at 25°C and is made up
of a solid rod of conductive composition material, which can be altered to produce different resistance values.
With a typical resistance range of 2.2Ω ~ 22MΩ, resistance tolerance is J(±5%) and K(±10%). Resistors with 5%
and 10% tolerance have four bands indicating value and tolerance in accordance with IEC62.
Our custom solutions are designed to address your need for technical and economic success in a timely manner.
Contact us with your specific needs.
Features
Applications
- Low inductance
- Solid rod carbon composition
- Power rating 1/4W and 1/2W
- Resistance range 2.2Ω ~ 22MΩ
- Resistance tolerance J(±5%) and K(±10%)
- High pulse withstanding and high energy capability
- Products with Pb-free Terminations and RoHS
compliant
Version 2010
http://www.token.com.tw/
- Strobe Lighting
- High Power Lighting
- Medical defibrillators
- Welding, Automotive
- Inrush Current Limiting
- High Voltage Power Supplies
- Protection (e.g. Discharge Circuits,
Surge Protection)
rfq token.com.tw
01 of 03
TOKEN
CCR Carbon Composition Resistors
Dimensions (Unit: mm)
Unit:mm
Color Band
Φd
L
H
Type
Power Rating
CCR
1/4W
6.3
CCR
1/2W
10
ΦD
H
L
+1.0
-1.5
+0.5
-1.5
ΦD
H
Φd
2.3±0.3
27±3
0.60±0.05
3.5±0.3
27±3
0.68±0.05
Ratings Specifications
Type
Power
Rating
CCR
1/4W
CCR
1/2W
Resistance
Range
2.2Ω
~12MΩ
2.2Ω
~22MΩ
Tolerance
E12,E24
Max Working Max overload Rated Ambient
voltage
Voltage
Temp.
J(±5%)K±10%
Operating
Temp. Range
250V
350V
+70°C
-40°C~+125°C
400V
700V
+70°C
-40°C~+125°C
Rated Voltage= Power Rating × Resistance Value or Max. working voltage,whichever is lower.
Rated Power %
Derating Curve
100
80
60
40
20
0
-40
0
40
70
125
80
100
Ambient Temp. °C
02 of 03
http://www.token.com.tw/
rfq token.com.tw
Version 2010
TOKEN
CCR Carbon Composition Resistors
Performance
Description
Resistance
Temperature
Coefficient
Short-time Overload
With Standing
Voltage
Pulled
Terminal
Winded
Strength
Twisted
Resistance to
vibration
Solder-heat
Resistance
Solderability
Temperature Cycle
Humidity
Load Life
Performance Requirements
Test Method
Maximum Resistance
Resistance
Value Change %
Range
-40~+20°C +20~+100°C
<1KΩ
±6.5%
±5.0%
Test Temperature
1.1KΩ ~10KΩ ±10%
±6.0%
+20°C /-40°C /+20°C /+100°C /+20°C
11KΩ ~100KΩ ±13%
±7.5%
11KΩ ~1MΩ
±15%
±10%
1.1MΩ ~10MΩ ±20%
±15%
>11MΩ
±25%
±20%
Rate Voltage*2.5 or maximun overload
Δ R≤±2.5%
voltage (the lower)5sec.
No flashover or breakdown
2times maxium working voltage 1 minute
ΔR≤±2% No visible damage
Load 10N 10s
Load 10N 4*90°
3*360° in opposite direction
No visible damage
10~50Hz 3 direction 2 hours each
ΔR≤±5% Marks legible,no visible damage
350°C 4mm from the body,3 seconds
At least 95% if the dipping surface must be
covered by new solder,no flaws gathered.
ΔR≤±2% No visible damage
ΔR≤±10% No visible damage
235°C 2mm from the body,2 seconds
-40°C(30min.)/85°C(30min.)5 cycles
40°C 95% RH 240 hours
Rated voltage or maximum working voltage,
ΔR≤±10% No visible damage,marks legible
1.5 hours on, 0.5 hours off, 40°C 1000 hours
How to Order
CCR
1/2W
120R
K
P





 Part Number: CCR
 Rated Power (W)
 Resistance Value (Ω)
Code
2R2
120R
1M2
22M
 Resistance Tolerance (%)
Resistance Value
2.2Ω
120Ω
1.2MΩ
22MΩ
Code
J
K
Resistance Tolerance
±5%
±10%
 Package
Code
P
Package
Bulk
Back to 1st Page - Carbon Composition Resistors (CCR)
Version 2010
http://www.token.com.tw/
rfq token.com.tw
03 of 03
Similar pages