Revised August 2004 NC7SZ18 TinyLogic UHS 1-of-2 Non-Inverting Demultiplexer with 3-STATE Deselected Output General Description Features The NC7SZ18 is a 1-of-2 non-inverting demultiplexer. The device will buffer the data on the A pin and pass to either output Y0 or Y1 dependent on whether state of the select pin (S) is LOW or HIGH respectively. The deselected output will be placed into a high impedance state. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC operating range. The inputs and outputs are high impedance when VCC is 0V. Inputs tolerate voltages up to 5.5V independent of VCC operating range. ■ Space saving SC70 6-lead surface mount package ■ Ultra small MicroPak leadless package ■ High Impedance output when deselected ■ Ultra High Speed: tPD 2.5 ns Typ into 50 pF at 5V VCC ■ Broad VCC Operating Range; 1.65V to 5.5V ■ Power down high impedance inputs/outputs ■ Overvoltage tolerant inputs facilitate 5V to 3V translation ■ Patented noise/EMI reduction circuitry implemented Ordering Code: Order Package Product Code Number Number Top Mark NC7SZ18P6X MAA06A Z18 6-Lead SC70, EIAJ SC88, 1.25mm Wide 3k Units on Tape and Reel NC7SZ18L6X MAC06A D5 6-Lead MicroPak, 1.0mm Wide 5k Units on Tape and Reel Package Description Supplied As Connection Diagrams Pin Descriptions Pin Names Description A Data Input S Demultiplexer Select Y0, Y1 Outputs Pin Assignments for SC70 Function Table Input S Output A Y0 Y1 L L L Z L H H Z Pin One Orientation Diagram H L Z L AAA = Product Code Top Mark - see ordering code H H Z H Note: Orientation of Top Mark determines Pin One location. Read the top product code mark left to right, Pin One is the lower left pin (see diagram). H = HIGH Logic Level L = LOW Logic Level Z = 3-STATE Pad Assignments for MicroPak (Top Thru View) TinyLogic is a registered trademark of Fairchild Semiconductor Corporation. MicroPak is a trademark of Fairchild Semiconductor Corporation. © 2004 Fairchild Semiconductor Corporation DS500322 www.fairchildsemi.com NC7SZ18 TinyLogic UHS 1-of-2 Non-Inverting Demultiplexer with 3-STATE Deselected Output September 1999 NC7SZ18 Absolute Maximum Ratings(Note 1) Supply Voltage (VCC ) −0.5V to +7.0V DC Input Voltage (VIN) −0.5V to +7.0V DC Output Voltage (VOUT) −0.5V to +7.0V Recommended Operating Conditions Supply Voltage Operating (VCC) DC Input Diode Current (IIK) @ VIN ≤ −0.5V Input Rise and Fall Time (tr, tf) ±50 mA ±100 mA −65°C to +150 °C Storage Temperature Range (TSTG) 150 °C Junction Temperature under Bias (TJ) 0 ns/V to 20 ns/V VCC @ 3.3V ± 0.3V 0 ns/V to 10 ns/V VCC @ 5.0V ± 0.5V 0 ns/V to 5 ns/V 350°C/W Note 1: Absolute maximum ratings are DC values beyond which the device may be damaged or have its useful life impaired. The datasheet specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside datasheet specifications. 260 °C (Soldering, 10 seconds) VCC @ 1.8V ± 0.15V, 2.5V ± 0.2V Thermal Resistance (θJA) Junction Lead Temperature (TL) Power Dissipation (PD) @ +85°C 0V to VCC −40°C to +85°C Operating Temperature (TA) −50 mA DC VCC or Ground Current (ICC/IGND) 0V to 5.5V Output Voltage (VOUT) DC Output Diode Current (IOK) @ VIN ≤ −0.5V 1.5V to 5.5V Input Voltage (VIN) −50 mA DC Output Current (IOUT) 1.65V to 5.5V Supply Voltage Data Retention (VCC) 180 mW DC Electrical Characteristics Symbol VIH Parameter HIGH Level Input Voltage VIL LOW Level Input Voltage VOH VOL TA = +25°C VCC Typ TA = −40°C to +85°C (V) Min Max Min 1.65 − 1.95 0.75 VCC 0.75 VCC 2.3 − 5.5 0.7 VCC 0.7 VCC 0.25 VCC 0.25 VCC 2.3 − 5.5 0.3 VCC 0.3 VCC 1.65 1.55 1.65 Output Voltage 2.3 2.2 2.3 2.2 3.0 2.9 3.0 2.9 Output Voltage IIN Input Leakage Current IOZ 3-STATE Output Leakage IOFF Power Off Leakage Current ICC Quiescent Supply Current Units Conditions V 1.65 − 1.95 HIGH Level LOW Level Max V 1.55 IOH = −100 µA 4.5 4.4 4.5 4.4 1.65 1.29 1.52 1.29 2.3 1.9 2.15 1.9 IOH = −8 mA 3.0 2.4 2.80 2.4 IOH = −16 mA 3.0 2.3 3.68 2.3 IOH = −24 mA 4.5 3.8 4.20 3.8 1.65 V VIN = VIH IOH = −4 mA IOH = −32 mA 0.0 0.10 0.10 2.3 0.0 0.10 0.10 3.0 0.0 0.10 0.10 IOL = 100 µA 4.5 0.0 0.10 0.10 1.65 0.08 0.24 0.24 2.3 0.10 0.3 0.3 3.0 0.15 0.4 0.4 IOL = 16 mA 3.0 0.22 0.55 0.55 IOL = 24 mA 4.5 0.22 V VIN = VIL IOL = 4 mA IOL = 8 mA IOL = 32 mA 0.55 0.55 0 to 5.5 ±0.1 ±1 µA VIN = 5.5V, GND 1.65 to 5.5V ±0.5 ±5 µA VIN = VIL or VIH 0.0 1 10 µA VIN or VOUT = 5.5V 1.8 to 5.5 1 10 µA VIN = 5.5V, GND 0 < VOUT ≤ 5.5V www.fairchildsemi.com 2 Symbol Parameter TA = +25°C VCC TA = −40°C to +85°C (V) Min Typ Max Min Max Units Conditions tPLH Propagation Delay 1.8 ± 0.15 2.0 6.3 10.1 2.0 10.5 CL = 15 pF, tPHL A to Y0 or Y1 2.5 ± 0.2 1.0 3.6 5.7 1.0 6.0 RD = 1 MΩ 3.3 ± 0.3 0.8 2.7 4.0 0.8 4.3 3.3 5.0 ± 0.5 0.5 2.0 3.1 0.5 tPLH Propagation Delay 3.3 ± 0.3 1.2 3.4 4.9 1.2 5.4 tPHL A to Y0 or Y1 5.0 ± 0.5 0.8 2.5 3.9 0.8 4.2 ns S1 = OPEN CL = 50 pF, ns RL = 500Ω S1 = OPEN tPZL Output Enable Time tPZH 1.8 ± 0.15 3.0 6.9 12.0 3.0 12.5 CL = 50 pF 2.5 ± 0.2 1.8 4.2 6.8 1.8 7.3 RD, RU = 500Ω 3.3 ± 0.3 1.2 3.2 5.0 1.2 5.5 5.0 ± 0.5 0.8 2.5 4.0 0.8 4.3 1.8 ± 0.15 2.5 6.0 10.0 2.5 10.5 CL = 50 pF 2.5 ± 0.2 1.5 4.0 6.8 1.5 7.1 RD, RU = 500Ω 3.3 ± 0.3 0.8 2.9 4.9 0.8 5.3 5.0 ± 0.5 0.3 1.8 3.5 0.3 3.7 ns S1 = GND for tPZH S1 = VIN for tPZL Figure Number Figures 1, 3 Figures 1, 3 Figures 1, 3 VI = 2 x VCC tPLZ Output Disable Time tPHZ ns S1 = GND for tPHZ S1 = VIN for tPLZ Figures 1, 3 VI = 2 x VCC CIN Input Capacitance OPEN 2.5 COUT Output Capacitance 3.3V 4.0 CPD Power Dissipation 3.3 16 Capacitance 5.0 19.5 pF pF (Note 2) Figure 2 Note 2: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD = (C PD)(VCC)(fIN) + (ICCstatic). 3 www.fairchildsemi.com NC7SZ18 AC Electrical Characteristics NC7SZ18 AC Loading and Waveforms Input = AC Waveform; t r = tf = 1.8ns PRR = 10 MHz; Duty Cycle = 50% S Input = GND or VCC CL includes load and stray capacitance Input PRR = 1.0 MHz; tW = 500 ns FIGURE 2. ICCD Test Circuit FIGURE 1. AC Test Circuit FIGURE 3. AC Waveforms www.fairchildsemi.com 4 TAPE FORMAT for SC70 Package Designator P6X Tape Number Cavity Section Cavities Status Cover Tape Status Leader (Start End) 125 (typ) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed TAPE DIMENSIONS inches (millimeters) Package SC70-6 Tape Size 8 mm DIM A DIM B 0.093 0.096 (2.35) (2.45) DIM F DIM Ko 0.138 ± 0.004 0.053 ± 0.004 (3.5 ± 0.10) 5 (1.35 ± 0.10) DIM P1 DIM W 0.157 0.315 ± 0.004 (4) (8 ± 0.1) www.fairchildsemi.com NC7SZ18 Tape and Reel Specification NC7SZ18 Tape and Reel Specification TAPE FORMAT for MicroPak Package (Continued) Tape Number Cavity Section Cavities Status Status Leader (Start End) 125 (typ) Empty Sealed Designator L6X Cover Tape Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed REEL DIMENSIONS inches (millimeters) Tape Size 8 mm A B C D N W1 W2 W3 7.0 0.059 0.512 0.795 2.165 0.331 + 0.059/−0.000 0.567 W1 + 0.078/−0.039 (177.8) (1.50) (13.00) (20.20) (55.00) (8.40 + 1.50/−0.00) (14.40) (W1 + 2.00/−1.00) www.fairchildsemi.com 6 NC7SZ18 Physical Dimensions inches (millimeters) unless otherwise noted 6-Lead SC70, EIAJ SC88, 1.25mm Wide Package Number MAA06A 7 www.fairchildsemi.com NC7SZ18 TinyLogic UHS 1-of-2 Non-Inverting Demultiplexer with 3-STATE Deselected Output Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 8