RoHS LS10 Ferrite Core Chip Inductors Dimensions: 0.60 (1.52) 0.20 (0.51) Terminal wrap around: 0.15 mm min. Both Ends 0.20 (0.51) 0.05 (1.27) 0.028 (0.70) 0.08 (2.03) 0.10 (2.5) 0.118 (2.99) Inches (mm) 0.10 (2.54) 0.04 (1.02) 0.09 (2.2) Inductance (µh) Tolerance (%) Q Typ. (L) Test Freq. (MHz) SRF Min. (MHz) LS10-1R2J-RC LS10-1R5J-RC LS10-1R8J-RC LS10-2R2J-RC 1.20 1.50 1.80 2.20 5 5 5 5 55 58 54 48 7.9 7.9 7.9 7.9 350 300 280 250 0.50 0.65 0.75 0.90 1200 1200 1050 950 LS10-2R7J-RC 2.70 5 51 7.9 200 1.00 950 LS10-3R3J-RC 3.30 5 58 7.9 200 1.15 900 LS10-3R9J-RC 3.90 5 37 7.9 170 1.25 850 LS10-4R7J-RC LS10-5R6J-RC 4.70 5.60 5 5 37 36 7.9 7.9 130 110 1.35 1.45 800 700 LS10-6R8J-RC 6.80 5 33 7.9 105 1.60 600 LS10-8R2J-RC 8.20 5 40 7.9 90 1.80 LS10-100J-RC LS10-150J-RC 10.0 15.0 5 5 40 35 7.9 7.9 85 38 2.40 2.40 550 500 Allied Part Number DCR Max. (Ω) IDC Current (mA) 450 Available in tighter tolerances. All specifications subject to change without notice. Features • 1008 SMD for Auto Insertion • Low DCR for Low Loss Applications • Excellent Solderability Characteristics • Highly resistant to mechanical forces • Excellent reliabiltiy in temperature and climate change Electrical Inductance Range: 1.2µh to 15µh Tolerance: 5% across entire range. Also available in 10% and 20%. Test Frequency: (L) entire range @ 7.96Mhz @ 200mv (Q) from 1.2µh to 3.3µh @ 50Mhz, from 3.9µh to 15µh @ 7.9Mhz Operating Temp. Range: -25ºC ~ 85ºC IDC: Inductance drop 10% Typ. from i l original value with no current Resistance to Solder Heat Pre-Heat 150ºC, 1 minute Solder Composition: Sn/Ag3.0/Cu0.5 soldering, Solder Temp. 260ºC peakAfter for 10 sec. Test time: 6 minutes -6 push l0 to 2000) x 10 °C. Test Equipment (L/Q): HP4286A / HP4287A /Agilent E4991A (DCR): Chen Hwa 502BC (SRF): HP8753D / Agilent E4991 (IDC): HP4284A with HP42841A / HP4285A with HP42841A Physical Packaging: 2000 pieces per 7 inch reel Marking: 3 Dot Color Code 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 12/11/08 www.alliedcomponents.com