Technical Data Sheet Cable assembly LU8-005-XXX RF_35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG RPC-2.40 JACK – RTK 125 Cable – RPC-2.40 PLUG All dimensions are in mm; tolerances: ± 3mm for A ≤ 300 mm; ± 1% for A > 300 mm Available variants Type max. Insertion loss at 50 GHz Weight (g) / pce LU8-005-XXX ≤ 0.00397 dB/mm * A mm + 0.70 dB 0.206 g/mm * A mm + 150 g XXX – length in mm = A - Standard lengths are 600, 800 and 1000mm. The smallest possible length is 400mm. - Assembly parts Connector left Connector right Cable Armour Electrical data Impedance Frequency Return loss Insertion loss After 90° bending Straight after 3x90° bending Amplitude stability Return loss stability Shielding Effectiveness RPC-2.40 ruggedized jack 09KR123-2U8S3 RPC-2.40 plug 09S123-2U8S3 RTK 125 Metal tubing with fixed bending rate and protection braid 50 Ω DC to 50 GHz ≥ 26 dB, DC to 4 GHz ≥ 17 dB, 4 GHz to 50 GHz see table available variants ≤ 1.3°, DC to 4 GHz ≤ 7.0°, 4 GHz to 50 GHz ≤ 1.0°, DC to 4 GHz ≤ 4.5°, 4 GHz to 50 GHz ≤ 0.03 dB, DC to 4 GHz ≤ 0.08 dB, 4 GHz to 50 GHz ≥ 45 dB, DC to 4 GHz ≥ 35 dB, 4 GHz to 50 GHz ≥ 100 dB up to 1 GHz Individual testing and documentation: Measurement plot with all 4 S-Parameters (S11; S22; S21; S12) is included with the cable assembly and on the backside the care and handling instruction is printed. Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel. : +49 8684 18-0 Email : [email protected] Page 1/2 Technical Data Sheet Cable assembly LU8-005-XXX RF_35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG RPC-2.40 JACK – RTK 125 Cable – RPC-2.40 PLUG Mechanical data Minimum bend radius: 60 mm Environmental data Temperature range RoHS -40°C to +85°C compliant While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we reserve the right to make changes judged to be necessary. Draft Date Approved Date Rev. Engineering change number Name Date Martin Moder 18.08.14 Herbert Babinger 08.06.16 g00 16-0803 K. Mitterer 08.06.16 Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel. : +49 8684 18-0 Email : [email protected] Page 2/2