COMPONENTS PRODUCT INFORMATION NEW CONNECTOR Small Waterproof Connector JN6 Series MB-0161-1 September 2006 Connecter for brake Connecter for power Connector for encoder [Example of use] Compact motor 4 pos. for power 2 pos. for brake 7 pos. for encoder <<Outline>> JN6 has been developed for small servo motors following the JN4, JN5 Series. With 4 power contacts, 2 brake contacts and 7 encoder contacts that are all reversible in the 180 degree direction. Features 1. 2. 3. 4. 5. 6. 7. All plastic ---lightweight, low cost Compact and low profile --- 4 pos.; plug overall length 28mm, plug height 11.4mm Receptacle attachment --- 4 pos.; molded in to motor 2 pos., 7pos.; crimp attached to motor Connection method --- 4pos. receptacle; board through-hole type 4pos. plug and other 2pos., 7pos.; crimp type Secure mating ---enables secure mating by screw fixing 4points Waterproof ---IP67 class Cable pulling out direction --- selectable from two directions(180 degrees) JAE PMK Div. Proprietary. Copyright © 2006, Japan Aviation Electronics Industry, Ltd. 1/9 MB-0161-1 General Specifications Items 1 2 3 4 5 6 Rated current Rated voltage Withstanding voltage Insulation resistance Waterproof Operating temperature Connection specification Plug applicable cable 7 8 Specification and performance for Power (4pos.) for Brake(2pos.)/ for Encorder (7pos.) 7A max. (per pos.) 1A max. (per pos.) 200VAC 100VAC 1500VAC 500VAC 1000M ohm min. (500V energized) 1000M ohm min. (500V energized) IP67 (when mated) IP67 (when mated) -40 to +125 Deg. C -40 to +125 Deg. C Receptacle: Angle through-hole Receptacle: crimp (AWG#28 to #22) Plug: crimp (AWG#20 to #18) Plug: crimp (AWG#28 to #22) Cable outer dia.: dia.6±0.5 Cable outer dia.: dia.5±0.5 Materials and Finishes 1) Receptacle Name of parts 1 Pin contact 2 Pin insulator Materials Copper alloy Resin (black) 3 Insert nut (4 pos. only) 4 pos. only: copper alloy Finishes Au plating Zinc plating (black chromate finish, chromium hexavalent free) 2) Plug 1 2 3 4 5 6 7 Name of parts Socket contact Socket insulator Hood Grand nut Gasket Bushing Spring 8 Screw Materials Copper alloy Resin (black) Resin (black) Resin (black) NBR (black) Heat resistant NBR (black) Heat resistant Stainless steel Steel Finishes Au plating Zinc plating (black chromate finish, chromium hexavalent free) JAE PMK Div. Proprietary. Copyright © 2006, Japan Aviation Electronics Industry, Ltd. 2/9 MB-0161-1 Ordering Information JN6 A S 04 N J 1 Series Modification No. Connector type A: Receptacle (square flange) C: Receptacle (without flange) F: Angle plug Shell size S: 10 to 55 mm R: 5 to 10 mm Contact size J: size #18 M: size #24 Connection method N: Angle through hole pin P: Crimp pin S: Crimp socket No. of contacts Part Number List Part Number JN6AS04NJ1 JN6FS04SJ* JN6CR02PM1 JN6FR02SM1 JN6CR07PM1 1. Part Number JN6FR07SM1 ST-JN5-S-C1B-2500-(A534G) JN6-P-C1-10000 JN6-P-C2-10000 LY10-C1-A1-10000 LY10-C2-A1-10000 JN6 Connector 2. Specification Specification JN6 Connector 3. Handling Instruction Handling Instruction SJ Drawing SJ105512 SJ105513 SJ105514 SJ105515 SJ105516 SJ105517 SJ101308 SJ105897 SJ105898 SJ100704 SJ100705 Remarks Receptacle (4pos. ) Angle plug (4pos. ) Receptacle (2pos. ) Angle plug (2pos. ) Receptacle (7pos. ) Angle plug (7pos. ) #18 crimp socket contact #24 crimp pin contact (C1) #24 crimp pin contct (C2) #24 crimp socket contact (C1) #24 crimp socket contact (C2) JACS-50014 JAHL-50014 JAE PMK Div. Proprietary. Copyright © 2006, Japan Aviation Electronics Industry, Ltd. 3/9 MB-0161-1 Connector Part Number 1 JN6AS04NJ1 Type Remarks Receptacle (4 pos.) for Power angle throgh-hole type JN6FS04SJ1 2 for Power crimp socket type (Standard type) Angle plug (4 pos. ) JN6FS04SJ2 for Power crimp socket type ( Reverse type) 3 JN6CR02PM1 Receptacle (2 pos.) for Brake crimp pin type 4 JN6FR02SM1 Angle plug (2 pos.) 5 JN6CR07PM1 Receptacle (7 pos.) for Brake crimp pin type 6 JN6FR07SM1 Angle plug (7 pos.) for Brake crimp socket type (Standard/ Reverse type both in common) for Brake crimp socket type (Standard/ Reverse type both in common) *Cable pulling out direction of plug is reversible. Select standard or reverse due to the pulling out direction. Crimp contact Crimp contact is sold separately. Refer below for part number. Applicable Connector Contact Category JN6FS04SJ* #18 Socket contact Part Number AWG Applicable Cable No. Outer Diameter ST-JN5-S-C1B-2500-(A534G) #20 to #18 dia. 1.3 to dia. 1.8 JN6CR02PM1 #24 Pin contact JN6-24P-C1-10000 #24 to #22 dia. 0.8 to dia. 1.3 JN6CR07PM1 JN6-24P-C2-10000 #28 to #26 dia. 0.7 to dia. 1.2 JN6FR02SM1 #24 Socket contact LY10-C1-A1-10000 #24 to #22 dia. 0.8 to dia. 1.3 JN6FR07SM1 LY10-C2-A1-10000 #28 to #26 dia. 0.7 to dia. 1.2 Crimping tools Use crimp tools below for contact crimping. Contact Category #18 Socket contact #24 Pin contact Tool Category Hand crimp Semi-automatic crimp Hand crimp Semi-automatic crimp #24 Socket contact Hand crimp Semi-automatic crimp Applicable Cable Applicable Tool AWG#20 AWG#20 AWG#24 AWG#28 AWG#28 AWG#24 AWG#28 AWG#28 to to to to to to to to #18 #18 #22 #26 #22 #22 #26 #22 CT160-3-JN5 350-JN5-2 CT150-4-JN6-1 CT150-4-JN6-2 350-LY1-2 CT150-4-LY1 CT150-4-LY2 350-LY1-2 Tool Handling Instruction T700263 T703332 T700287 T703138 T700132 T703138 ** For RoHS compliance information concerning connection and removal tools which appear in this brochure, please consult us. JAE PMK Div. Proprietary. Copyright © 2006, Japan Aviation Electronics Industry, Ltd. 4/9 MB-0161-1 [Receptacle/ 4pos. ] Connecter Attachment (for reference) max. max. Connector min. Connector mold in to board Board (Pitch) max. (pitch) max. Applicable board thickness (for reference) ================================ (board thickness: 2.0 max.) JAE PMK Div. Proprietary. Copyright © 2006, Japan Aviation Electronics Industry, Ltd. 5/9 MB-0161-1 [Angle plug 4pos. ] Connecter Pulling Out Direction (for reference) Key (2 point) Key (1 point) Reverse type Standard type “JAE” indication (Receptacle) Base insulator1 Base insulator2 (Color: gray) (Color: black) [Standard type] [Reverse type] JAE PMK Div. Proprietary. Copyright © 2006, Japan Aviation Electronics Industry, Ltd. 6/9 MB-0161-1 Connecter Attachment [Receptacle/ 2pos. ] Connector Press fit into case Connector Case [Angle plug 2pos. ] Connecter Pulling Out Direction C Chamfering Key Reverse type Standard type “JAE” indication (Receptacle) [Standard type] [Reverse type] JAE PMK Div. Proprietary. Copyright © 2006, Japan Aviation Electronics Industry, Ltd. 7/9 MB-0161-1 Connecter Attachment [Receptacle/ 7pos. ] Connector Press fit into case Connector Case [Angle plug 7pos. ] Connecter Pulling Out Direction C Chamfering Reverse type Standard type “JAE” indication (Receptacle) [Standard type] C Chamfering [Reverse type] JAE PMK Div. Proprietary. Copyright © 2006, Japan Aviation Electronics Industry, Ltd. 8/9 MB-0161-1 Japan Aviation Electronics Industry, Limited Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone: +81-3-3780-2787 FAX: +81-3-3780-2946 Notice: Products shown in this leaflet are made for the applications listed below. However, if the above-mentioned products are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for life-support systems, or any other specific application requiring extremely high reliability, please contact JAE for further information. Recommended applications: Computers, Office machines, Measuring devices, Telecommunication devices (Terminals, Mobile devices), AV devices, Household applications, FA devices, etc. * The specifications in this brochure are subject to change without notice. Please contact JAE for information. JAE PMK Div. Proprietary. Copyright © 2006, Japan Aviation Electronics Industry, Ltd. 9/9