DS52-0007 Low Cost Two-Way GMIC SMT Power Divider, 2200 - 2500 MHz Rev. V5 Features • • • • • Small Size and Low Profile Typical Insertion Loss: 1.0 dB Typical Amplitude Balance: 0.1 dB 1 Watt Power Handling SOT-25 Package Functional Block Diagram GND RF IN 4 5 Description M/A-COM’s DS52-0007 is an IC-based monolithic power divider using M/A-COM’s GMIC technology in a low cost SOT-25 plastic package. This 2-way power divider is ideally suited for applications where small size, low insertion loss, superior phase/ amplitude tracking and low cost are required. Typical applications include handsets, base station switching networks and other communication applications where size and PCB real estate are at a premium. Available in Tape and Reel. 1 The DS52-0007 is fabricated using a passiveintegrated circuit process. The process features fullchip passivation for increased performance and reliability. Ordering Information 2 3 RF2 (Out) RF1 (Out) GND Pin Configuration Part Number Package DS52-0007 Bulk Packaging DS52-0007-TR 1000 piece reel 2 GND Sample Test Board 3 RF2 (OUT) 4 GND 5 RF IN DS52-0007SAM Note: Reference Application Note M513 for reel size information. Pin No. Function 1 RF1 (OUT) 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS52-0007 Low Cost Two-Way GMIC SMT Power Divider, 2200 - 2500 MHz Rev. V5 Electrical Specifications: TA = 25°C, Z0 = 50Ω Parameter Frequency Units Min Typ Max Insertion Loss (above 3.0 dB theoretical loss) 2200 - 2500 MHz dB — 1.0 1.1 Isolation 2200 - 2500 MHz dB 15 22 — Input VSWR 2200 - 2500 MHz Ratio — 1.6:1 1.8:1 Output VSWR 2200 - 2500 MHz Ratio — 1.3:1 1.5:1 Amplitude Balance 2200 - 2500 MHz dB — 0.1 — Phase Balance 2200 - 2500 MHz ° — 2 — Absolute Maximum Ratings 1,2 Parameter Input Power 3 Absolute Maximum 1 W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C Recommended PCB Configuration 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 2. M/A-COM does not recommend sustained operation near these survivability limits. 3. With internal load dissipation of 0.125 W maximum. Handling Procedures Please observe the following precautions to avoid damage: Dimensions in inches. Circuit Material: FR-4, .016 Thick. Static Sensitivity GMIC Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS52-0007 Low Cost Two-Way GMIC SMT Power Divider, 2200 - 2500 MHz Rev. V5 Typical Performance Curves @ 25ºC Isolation vs. Frequency Insertion Loss vs. Frequency 1.5 26 Insertion Loss (dB) 24 Isolation (dB) 1.0 0.5 22 20 18 16 0.0 2200 2275 2350 2425 2500 Fre que ncy (MHz ) 14 2200 2275 2350 2425 2500 Fre que ncy (MHz ) VSWR vs. Frequency Inp ut Out p ut 2.0 VSW R 1.8 1.6 1.4 1.2 1.0 2200 2275 2350 2425 2500 Frequency (MHz) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS52-0007 Low Cost Two-Way GMIC SMT Power Divider, 2200 - 2500 MHz Rev. V5 SOT-25† † Reference Application Note M538 for lead-free solder reflow recommendations. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.