BPV11F www.vishay.com Vishay Semiconductors Silicon NPN Phototransistor FEATURES • Package type: leaded • Package form: T-1¾ • Dimensions (in mm): Ø 5 • High radiant sensitivity • Daylight blocking filter matched with 940 nm emitters • Fast response times 12784 • Angle of half sensitivity: = ± 15° • Base terminal connected • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION BPV11F is a silicon NPN phototransistor with high radiant sensitivity in black, T-1¾ plastic package with base terminal and daylight blocking filter. Filter bandwidth is matched with 900 nm to 950 nm IR emitters. APPLICATIONS • Detector for industrial electronic circuitry, measurement and control PRODUCT SUMMARY COMPONENT Ica (mA) (deg) 0.5 (nm) 9 ± 15 900 to 980 PACKAGING REMARKS PACKAGE FORM Bulk MOQ: 4000 pcs, 4000 pcs/bulk T-1¾ BPV11F Note • Test condition see table “Basic Characteristics” ORDERING INFORMATION ORDERING CODE BPV11F Note • MOQ: minimum order quantity ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) SYMBOL VALUE UNIT Collector base voltage PARAMETER TEST CONDITION VCBO 80 V Collector emitter voltage VCEO 70 V Emitter base voltage VEBO 5 V mA Collector current Collector peak current Power dissipation IC 50 tp/T = 0.5, tp 10 ms ICM 100 mA Tamb 47 °C PV 150 mW Junction temperature Operating temperature range Storage temperature range Soldering temperature Thermal resistance junction/ambient Rev. 1.6, 03-May-13 Tj 100 °C Tamb - 40 to + 100 °C °C Tstg - 40 to + 100 t 5 s, 2 mm from body Tsd 260 °C Connected with Cu wire, 0.14 mm2 RthJA 350 K/W Document Number: 81505 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BPV11F www.vishay.com Vishay Semiconductors PV - Power Dissipation (mW) 200 160 120 RthJA 80 40 0 0 20 40 60 80 Tamb - Ambient Temperature (°C) 94 8300 100 Fig. 1 - Power Dissipation Limit vs. Ambient Temperature BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. IC = 1 mA V(BR)CEO 70 VCE = 10 V, E = 0 Collector emitter breakdown voltage Collector emitter dark current TYP. MAX. UNIT ICEO 1 50 nA V DC current gain VCE = 5 V, IC = 5 mA, E = 0 hFE 450 Collector emitter capacitance VCE = 0 V, f = 1 MHz, E = 0 CCEO 15 Collector base capacitance VCE = 0 V, f = 1 MHz, E = 0 CCBO 19 pF Ee = 1 mW/cm2, = 950 nm, VCB = 5 V Ica 9 mA ± 15 deg Collector light current 3 Angle of half sensitivity pF p 930 nm 0.5 900 to 980 nm Ee = 1 mW/cm2, = 950 nm, IC = 1 mA VCEsat 130 Turn-on time VS = 5 V, IC = 5 mA, RL = 100 ton 6 Turn-off time VS = 5 V, IC = 5 mA, RL = 100 toff 5 μs Cut-off frequency VS = 5 V, IC = 5 mA, RL = 100 fc 110 kHz Wavelength of peak sensitivity Range of spectral bandwidth Collector emitter saturation voltage 300 mV μs BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 2.0 Ica rel - Relative Collector Current ICEO - Collector Dark Current (nA) 104 3 10 VCE = 10 V 102 101 10 20 94 8249 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 2 - Collector Dark Current vs. Ambient Temperature Rev. 1.6, 03-May-13 1.8 VCE = 5 V Ee = 1 mW/cm2 λ = 950 nm 1.6 1.4 1.2 1.0 0.8 0.6 0 94 8239 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 3 - Relative Collector Current vs. Ambient Temperature Document Number: 81505 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BPV11F www.vishay.com CCBO - Collector Base Capacitance (pF) Vishay Semiconductors 10 1 VCE = 5 V λ = 950 nm 0.1 0.01 0.01 0.1 Ee - Irradiance (mW/cm²) 94 8244 Ica - Collector Light Current (mA) 100 λ = 950 nm Ee = 1 mW/cm 2 0.5 mW/cm2 2 0.2 mW/cm 0.1 mW/cm2 1 0.05 mW/cm2 0.02 mW/cm2 0.1 0.1 1 100 10 VCE - Collector Emitter Voltage (V) 94 8245 0 1 100 10 VCB - Collector Base Voltage (V) Fig. 7 - Collector Base Capacitance vs. Collector Base Voltage 20 f = 1 MHz 16 12 8 4 0 0.1 1 100 10 VCE - Collector Ermitter Voltage (V) Fig. 8 - Collector Emitter Capacitance vs. Collector Emitter Voltage ton/toff - Turn-on/Turn-off Time (µs) VCE = 5 V B - Amplification 4 12 600 400 200 0.1 1 10 IC - Collector Current (mA) Fig. 6 - Amplification vs. Collector Current Rev. 1.6, 03-May-13 8 0.1 800 94 8250 12 94 8247 Fig. 5 - Collector Light Current vs. Collector Emitter Voltage 0 0.01 f = 1 MHz 16 94 8246 Fig. 4 - Collector Light Current vs. Irradiance 10 20 10 1 CCEO - Collector Ermitter Capacitance (pF) Ica - Collector Light Current (mA) 100 VCE = 5 V RL = 100 Ω λ = 950 nm 10 8 6 ton 4 0 100 94 8253 toff 2 0 4 8 12 16 IC - Collector Current (mA) Fig. 9 - Turn-on/Turn-off Time vs. Collector Current Document Number: 81505 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BPV11F www.vishay.com Vishay Semiconductors 10° 20° 30° 0.8 0.6 0.4 0.2 40° 1.0 0.9 50° 0.8 60° 70° 0.7 ϕ - Angular Displacement 1.0 Srel - Relative Sensitivity S(λ)rel - Relative Spectral Sensitivity 0° 80° 0 800 900 0.2 0 94 8248 λ - Wavelength (nm) 94 8258 0.4 0.6 1100 1000 Fig. 10 - Relative Spectral Sensitivity vs. Wavelength Fig. 11 - Relative Radiant Sensitivity vs. Angular Displacement 5.75 ± 0.15 PACKAGE DIMENSIONS in millimeters C E B 0.8 + 0.2 - 0.1 Chip position ± 0.15 ± 0.3 ± 0.15 8.6 7.6 ± 0.3 R 2. 45 (s 0.8 Area not plane + 0.2 - 0.1 0.5 + 0.2 - 0.1 0.5 + 0.15 1.5 ± 0.25 0.8 + 0.2 - 0.1 < 0.7 35 ± 0.5 12.3 e) er ph (4.55) 5 2.54 nom. 1.27 nom. technical drawings according to DIN specifications Drawing-No.: 6.544-5188.01-4 Issue:1; 01.07.96 96 12200 Rev. 1.6, 03-May-13 Document Number: 81505 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000