JNPS-0846 目 次 ／ CONTENTS 1. 頁 / PAGE 機能 ················································································································· 1 FUNCTION············································································································ 6 2. 適合対象 ········································································································· 1 COMPATIBLE OBJECTS ····················································································· 6 3. 関連仕様図 ····································································································· 1 RELATED SPECIFICATION DRAWINGS ························································ 6 4. 関連規格類 ····································································································· 1 RELATED TEST STANDARDS ········································································· 6 5. 適用 ················································································································· 2 APPLICATION ······································································································ 7 6. 品質特性 ······································································································· 3 QUALITY PERFORMANCE················································································· 8 7. 製品上めっき仕様識別表示 ·········································································· 4 PLATING SPEC INDICATION ON CONNECTOR·············································· 9 8. 包装＆表示 ····································································································· 4 PACKAGE & IDENTIFICATION ········································································· 9 9. 保管 ················································································································· 5 STORAGE············································································································ 10 10. 注意事項 ········································································································· 5 ATTENTIONS ····································································································· 10 i JNPS-0846 1. FUNCTION This connector is designed for IDC (Insulation Displacement Connector) connection with 1.27mm pitch flat cable. This connector has 2 rows of plural U-elements at topside and 2 rows of contact tails at bottom side. Then, this connector has the function of electrical connection between cable and PC board or cable and compatible IC socket (Plating Suffix : SC or S). 2. COMPATIBLE OBJECTS 2-1 WIRE ACCOMODATION 28 AWG Stranded *corresponding with UL Style 2651 2-2 COMPATIBLE BOARD Thickness: 1.6mm ± 0.2mm Through hole diameter: φ1.0mm ± 0.1mm * Refer to the drawing 4U-0010-0940-6. * In the case that (X)3406-0000 XX (14 pos.) or (X)3416-0000 XX (16 pos.) is mounted on the PC board by soldering, more than 0.5mm thickness spacers (ex. plastic washer with high temperature resistance) should be used for spacing between the connector body and PC board. 2-3 COMPATIBLE IC SOCKET IS socket should have the compatibility with the following specification of the terminals. PRODUCT No. LEAD LENGTH (X)3406-0000 XX (14Pos.) and (X)3416-0000 XX (16Pos.) 4.4 ± 0.3mm * These connectors don't have standoff bumps. (X)3460-0000 XX (24Pos.) 3.8 ± 0.3mm * Lower side from the bottom of the standoff bumps (Height: 0.6mm). (X)3508-0000 XX (40Pos.) 3.9 ± 0.3mm * Lower side from the bottom of the standoff bumps (Height: 0.5mm). LEAD SECTION 0.46 ± 0.05mm × 0.36 ± 0.05mm * IC socket should be used for (X)3XXX-0000 SC and (X)3XXX-0000 S. IC socket can not be used for (X)3XXX-0000 PR. 3. RELATED SPECIFICATION DRAWINGS See the drawings described in JNPD-0846. 4. RELATED TEST STANDARDS MIL-STD-202 JEIDA-38-1984 JIS C 0050 JNTM-0039, JNTM-0040 *JNTM: Test Method Standard of Sumitomo 3M for Electronic and Electrical Component Parts. ６ JNPS-0846 5. APPLICATION PRODUCT NUMBER INFORMATION (X) 3XXX – 0 X 0 0 XX PLATING SUFFIX PR : U-ELEMENT AREA & TAIL AREA / Gold Flash Plating SC : U-ELEMENT AREA / Nickel Plating TAIL AREA / Gold Plating 0.2µm Min S : U-ELEMENT AREA / Nickel Plating TAIL AREA / Gold Plating 0.76µm Min. SHAPE OF TAIL SECTION 0 : Rectangular Pin (0.46mm × 0.36mm) CONTACT DISPOSITION 0: 1: Standard (Body Color : Gray) Mirror Image Type (Body Color : Black) CONTACT QUANTITY 3406: 14P (Distance of terminal row : 7.62mm) 3416: 16P (Distance of terminal row : 7.62mm) 3460: 24P (Distance of terminal row : 15.24mm) 3508: 40P (Distance of terminal row : 15.24mm) BODY COLOR Blank : Gray D : Black (Contact Disposition : Standard) (Contact Disposition : Mirror Image Type) ７ JNPS-0846 6. QUALITY PERFORMANCE 6-1 RATING ITEM RATING CURRENT 1.0A VOLTAGE AC: 250V Max. 6-2 PHYSICAL SPECIFICATIONS VIBRATION MECHANICAL SHOCK SOLDERABILITY / DC: 300V Max. -55°C ~ 105°C TEMPERATURE TEST DESCRIPTION Max. * The value in ( REQUIREMENT ) is reference. TEST CONDITION RELATED STANDARD Electrical discontinuity: Less than 1µs Sweep Freq.: 10∼55Hz, Amplitude: 1.52mm(or 98 m/s2), Sweep Cycle: 1min., Sweep time: 2 hours Sweep in each direction: (X,Y,Z) MIL-STD202F 101A Electrical discontinuity: Less than 1µs 490 m/s2, 11ms, Half sine shock pulse. 3 times / X,Y,Z directions (Total 18 times) MIL-STD202E 213B Wetting: 95% Min. or Zero cross time: 3 seconds Max. Solder: Sn-3Ag-0.5Cu - Wetting Measurement: 245°C, 3 seconds - Wetting Balance Method: 245°C JNTM-0039 JIS C 0050 Connector should not have Dip soldering: 260°C, 10 seconds, 2 times or 263°C, 5 seconds, 2 times * without Pre-heating Soldering Iron: Dependence on soldering conditions. * It need the evaluation under actual conditions. JNTM-0040 any defect portions after test. SOLDERING HEAT RESISTANCE ８ JNPS-0846 6-3 ELECTRICAL SPECIFICATIONS TEST DESCRIPTION REQUIREMENT DIELECTRIC WITHSTANDING VOLTAGE No appearance of arcing and break down. Leak current: 1mA Max. Impressed voltage is AC 1000V rms. between adjacent two contacts for one minute. ―――― 1000MΩ Min. Impressed voltage is DC 500V between adjacent two contacts for one minute. ―――― - Initial / 25 mΩ Max. - Change of contact resistance after environmental tests / 20 mΩ Max. Contact resistance is measured at Short Circuit. Current: 1.5mA Open Circuit Voltage: 20mV by 4 terminal method. * Measurement values include the resistance of contact pins as conductive material. INSULATION RESIDENSE CONTACT RESISTANCE RELATED STANDARD TEST CONDITION See Table 1. * Refer to Table 1 regarding the conditions of each environmental test. Table 1: ENVIROMENTAL TEST ITEM MOISTURE RELATED STANDARD -10 ∼ 65°C, Relative Humidity 95% / 10 cycles MIL-STD-202F106D NaCl 5% solution, 35°C / 48 hours MIL-STD-202F101D THERMAL SHOCK -55°C→25°C→85°C→25°C / 5 cycles MIL-STD-202F107G HUMIDITY (STEADY STATE) 40°C, Relative Humidity 95% / 96 hours MIL-STD-202F103B SALT SPRAY THERMAL LIFE H2S GAS 7. TEST CONDITION Steady Current: Current Rating × 110%, 85°C / 1000 hours 3 ± 1 ppm, 40°C, Relative Humidity 70 ∼ 80% / 96 hours ―――― JEIDA-38-1984 PLATING SPEC INDICATION ON CONNECTOR The first letter, in stamped 3 letters on the connector body for lot numbering, identified the following plating specs. N XX or n XX : PR plating C XX or c XX : SC plating S XX or s XX : S plating * XX : two alphabet letters 8. PACKAGE & IDENTIFICATION These products are packed with plastic tray and carton box for transit. Carton box are identified by part number, quantity, maker name and lot number. ９ JNPS-0846 9. STORAGE This products shall be stored in a room, ambient temperature 5 ∼ 35°C, and ambient humidity 40 ∼ 70%. 10. ATTENTIONS 10-1 BOARD MOUNTING In the case that (X)3406-0000 XX (14 pos.) or (X)3416-0000 XX (16 pos.) is mounted on the PC board by soldering, more than 0.4mm thickness spacers (ex. plastic washer with high temperature resistance) should be used for spacing between the connector body and PC board. 10-2 COMPATIBILITY WITH IC SOCKET IC socket should be used for (X)3XXX-0000 SC and (X)3XXX-0000 S. IC socket can not be used for (X)3XXX-0000 PR. １０