AZ9405 10 AMP MINIATURE POWER RELAY FEATURES • • • • • • 4 kV dielectric strength Epoxy sealed version available 4 mm clearance & 6 mm creepage (1 Form A) 3 mm clearance & 5 mm creepage (1 Form C) UL, CUR file E44211 TÜV R50304647 CONTACTS Arrangement SPST (1 Form A) SPDT (1 Form C) Ratings Resistive load: Max. switched power: 150 W or 1400 VA (N.O.) 90 W or 850 VA (N.C.) Max. switched current: 10 A Max. switched voltage: 30 VDC* or 277 VAC * Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL 1 Form A 10 A at 125 VAC, resistive, 85°C, 100k cycles 5 A at 277 VAC, resistive, 85°C, 100k cycles 1/10 HP at 125/250 VAC, 85°C, 100k cycles 1 Form C - normally open contacts 5 A at 277 VAC, resistive, 85°C, 100k cycles 5 A at 30 VDC, resistive, 85°C, 100k cycles 1/10 HP at 125/250 VAC, 85°C, 100k cycles 1 Form C - normally closed contacts 3 A at 277 VAC, resistive, 85°C, 100k cycles 3 A at 30 VDC, resistive, 85°C, 100k cycles TÜV 1 Form A 10 A at 125 VAC, resistive, 85°C, 100k cycles 5 A at 277 VAC, resistive, 85°C, 100k cycles 1 Form C - normally open contacts 5 A at 277 VAC, resistive, 85°C, 100k cycles 5 A at 30 VDC, resistive, 85°C, 100k cycles 1 Form C - normally closed contacts 3 A at 277 VAC, resistive, 85°C, 100k cycles 3 A at 30 VDC, resistive, 85°C, 100k cycles Material Silver tin oxide Resistance < 100 milliohms initially (6 V, 1 A voltage drop method) NOTES 1. All values at 20°C (68°F) 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at rated load Operate Time (max.) 10 ms at nominal cail voltage (standard) 15 ms at nominal coil voltage (sensitive) Release Time (max.) 5 ms at nominal coil voltage (with no coil suppression) Dielectric Strength (at sea level for 1 min.) 4000 Vrms coil to contact 1000 Vrms between open contacts Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage -40°C (-40°F) to 85°C (185°F) Vibration 1.5 mm DA at 10–55 Hz Shock 10 g operating, 100 g damage Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 7 grams COIL Power At Pickup Voltage (typical) 196 mW (standard coil) 113 mW (sensitive coil) Max. Continuous Dissipation 676 mW at 20°C (68°F) ambient Temperature Rise (at nominal voltage) 42°C (76°F) standard coil 24°C (44°F) sensitive coil Temperature ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany Max. 130°C (266°F) - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2015-01-16 AZ9405 RELAY ORDERING DATA STANDARD COIL COIL SPECIFICATIONS ORDER NUMBER* Nominal Coil VDC Must Operate VDC Max. Continuous VDC Coil Resistance Ohm ± 10% 3 2.1 3.9 22.5 AZ9405-1A-3DF AZ9405-1C-3DF 5 3.5 6.5 63 AZ9405-1A-5DF AZ9405-1C-5DF 6 4.2 7.8 90 AZ9405-1A-6DF AZ9405-1C-6DF 9 6.3 11.7 202.5 AZ9405-1A-9DF AZ9405-1C-9DF 12 8.4 15.6 360 AZ9405-1A-12DF AZ9405-1C-12DF 18 12.6 23.4 810 AZ9405-1A-18DF AZ9405-1C-18DF 24 16.8 31.2 1,440 AZ9405-1A-24DF AZ9405-1C-24DF 48 33.6 62.4 5,760 AZ9405-1A-48DF AZ9405-1C-48DF Form A (SPST) Form C (SPDT) SENSITIVE COIL COIL SPECIFICATIONS Nominal Coil VDC Must Operate VDC Max. Continuous VDC ORDER NUMBER* Coil Resistance Ohm ± 10% Form A (SPST) Form C (SPDT) 3 2.25 3.9 45 AZ9405-1A-3DSF AZ9405-1C-3DSF 5 3.75 6.5 125 AZ9405-1A-5DSF AZ9405-1C-5DSF 6 4.50 7.8 180 AZ9405-1A-6DSF AZ9405-1C-6DSF 9 6.75 11.7 400 AZ9405-1A-9DSF AZ9405-1C-9DSF 12 9.00 15.6 720 AZ9405-1A-12DSF AZ9405-1C-12DSF 18 13.50 23.4 1,620 AZ9405-1A-18DSF AZ9405-1C-18DSF 24 18.00 31.2 2,800 AZ9405-1A-24DSF AZ9405-1C-24DSF * Add suffix “E” before “F” at the end of order number for sealed version. MECHANICAL DATA PC BOARD LAYOUT max. .80 [max. 20.3] .043 [1.10] max. .40 [max. 10.3] .400 [10.16] .300 [7.62] .045 [1.15] .300 [7.62] max. .61 [max.15.5] .016 [0.4] 5 x ø .051 [ø 1.3] .100 [2.54] 5 x.149 [3.8] WIRING DIAGRAM 1 5 8 2 x.018±.005 [2 x 0.45±0.12] 2 x.018±.005 [2 x 0.45±0.12] 3 x.009±.005 [3 x 0.24±0.12] 1 FORM A 5 16 FORM C 8 3 x.031±.005 [3 x 0.80±0.12] Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany 10 VIEWED TOWARD TERMINALS - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2015-01-16