FSAN High Power Triplexer OTP-345V1-PF-622-SCA-D4 Features • Low Cost 1310nm FP Design, 1490nm Digital Receiver, and 1555nm Analog Receiver • High Isolation • Multiple TIA Version for 155, 622, 1250 Mbps Applications • 1 GHz Video Reciever Bandwidth • Compliant to FSAN Class B ITU-T G.983.3 Specification • Support ITR-B1F-AF4-1 Absolute Maximum Ratings Parameter Min Typical Max Unit Operating Temperature -40 - 85 ºC Storage Temperature -40 - 85 ºC Module Characteristics Note1 Parameter (a) Min Typical Max Unit 32 - - dB 1490nm data to 1555nm Rx isolation (b) 34 - - dB 1310nm external to 1555nm Video isolation 22 - - dB 1310nm external to 1490nm data isolation 17 - - dB 1310nm Tx to 1490nm Rx crosstalk - - -47 dB 1310nm Tx to 1555nm Rx crosstalk - - -47 dB Back Reflection @ 1310nm - - -6 dB Back Reflection @ 1555nm - - -32 dB Back Reflection @ 1490nm - - -20 dB 1555nm Video to 1490nm Rx isolation Note 1) All data is specified at EOL and across the operating temperature range. (a) 1550nm to 1560nm isolation at digital receiver (b) 1480nm to 1500nm isolation at video receiver Transmitter Characteristics Note1 Parameter Symbol Min Typical Max Unit Wavelength λ 1260 - 1360 nm Spectral Width ∆λ - 2 3 nm Typical 1/2 Ppeak set point @25ºC Pset - 1.5 - dBm Tracking Error TE -3 - 3 dB 1/2 Ppeak over temp 1/2Ppeak 0.5 - 3.5 dBm Bias Current (=Ith+1/2Imod) Ibias,EOL - - 75 mA Ith 2 - 50 mA Threshold Current (e) Modulation Current Imod 10 - 60 mA PD Monitor Current (@ Pset) @25ºC (@ Pset) IPD,mon 100 - 1500 µA PD Monitor Current (@ Pset) -40ºC and 85ºC IPD,mon 100 - 1300 µA Forward Voltage Vf - 1.2 1.7 Volts Rise/Fall Time (c) tr/tf - - 0.5 ns µA ID - - 1 PD Monitor Capacitance (d) PD Monitor Dark Current CPD - 10 15 pF Quantum Efficiency QE 0.045 - 0.3 mW/mA Note 1) All data is specified at EOL and across the operating temperature range. (c) 10% to 90% (d) VRD = 10V (e) greater modulation current can be used to increase output power LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 1 LUMNDS826-AUG0105 rev. A.1 FSAN High Power Triplexer OTP-345V1-PF-622-SCA-D4 Digital Receiver Electrical Characteristics (622 Mbps) Parameter Symbol Min Typical Max Unit Detection Wavelength λ 1480 - 1500 nm Gain, Differential G 12 - - mV/µW - - - -29 dBm Pin -4 - - dBm 3 - - dBm Sensitivity Optical Input Overload Optical Input Power Damage Threshold Supply Voltage VCC 3.135 3.3 3.465 V Supply Current (a) ICC 20 35 50 mA MHz High Frequency -3 dB point (b) f-3dB(h) 400 520 600 Vo(se)(p-p) - - 450 mV Ro(se) 40 50 62 Ohm Small Signal Transresistance, differential Rtr 7 - 25 KΩ Polarization Dependent Loss PDL - - 0.5 dB Unit Single-ended Output Voltage (p-p) @100mA p-p Single-ended Output Resistance (a) AC coupled; RL = 50 Ohm (b) Ci = 0.7 pF Analog Receiver Characteristics Parameter Detection Wavelength Optical Input power Damage Threshold Symbol Min Typical Max λ 1550 1555 1560 nm Pdamage 3 - - dBm Responsivity R 0.75 0.85 - mA/mW Bandwidth (a) BW 1000 - - MHz Dark Current at Vr=5V Id - 2 50 nA Capacitance at Vr =5V and 1 MHz C - 0.6 1.5 pF - - -70 dBc - - -80 dBc - - 0.5 dB DSO DTB Polarization Dependent Loss PDL (a) 0.5 dB measurement LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 2 LUMNDS826-AUG0105 rev. A.1 FSAN High Power Triplexer OTP-345V1-PF-622-SCA-D4 Outline Drawing Mechanical Drawing PIN PIN-TIA PIN-TIA Pin Assignment PD+ PD- Functional Schematic LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 3 LUMNDS826-AUG0105 rev. A.1 FSAN High Power Triplexer OTP-345V1-PF-622-SCA-D4 Ordering Information Available Options: OTP-345V1-PF-622-SCA-D4 Part Numbering Definition: M in. OTP - 345V 1 - Half Peak Output Pow er - Connector Digital TIA - Isolator - Connector Type - Design specific - • Blank = No TIA 155 • PX PA A = -13 to -16dBm PA = -9 to -13 dBm PB = -6 to -9 dBm PC = -3 to -6 dBm PD = -1 to -3 dBm PE = -1 to +1 dBm PF = +1 to +3 dBm • Blank = Pigtail RL = Receptacle LC RS = Receptacle SC 622 1250 • Blank = No Isolator I = Isolator • SCX LCX FCX STX X = A (angled) X = U (ultra) • D4 : PIN and PIN TIA assignments rotate 180 aegree, Customer P/N:728-000261-06 Warnings: Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation. Legal Notes: IMPORTANT NOTICE! All information contained in this document is subject to change without notice, at LuminentOIC’s sole and absolute discretion. LuminentOIC warrants performance of its products to current specifications only in accordance with the company’s standard one-year warranty; however, specifications designated as “preliminary” are given to describe components only, and LuminentOIC expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the company’s Terms and Conditions of Sale for further warranty information. LuminentOIC assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and LuminentOIC makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. LuminentOIC customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify LuminentOIC for any damages resulting from such use or sale. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agrees that LuminentOIC is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact LuminentOIC to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current. © LuminentOIC, Inc. 2005 All rights reserved LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 4 LUMNDS826-AUG0105 rev. A.1