CDE AFK107M35F24VT-F Low impedance and long-life for filtering, bypassing and power supply decoupling Datasheet

Type AFK_V, –55 °C to 105 °C, High Vibration
SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 °C
Low Impedance and Long-Life for Filtering, Bypassing and Power Supply Decoupling
Using a ruggedized construction, type AFK_V withstands a 30 G
vibration test and has 40% to 60% lower impedance, 30% to 50%
smaller case size and more than twice the life compared to general
purpose types. As the main countermeasure to vibration, the metal
case is inserted into a molded plastic retaining wall that surrounds
the part, keeping it firmly in place. Larger diameter leads provide
additional mechanical stability of the internal winding and a larger
soldering surface keeps the part firmly affixed to the PCB. Type
AFK_V is an excellent choice for power systems subjected to frequent
motion and vibration.
Highlights
•
•
•
•
Specifications
Withstands 30 G vibration test
+105 °C, Up to 5000 Hour Load Life
Capacitance Range: 10 µF to 6800 µF
Voltage Range: 6.3 Vdc to 100 Vdc
Capacitance Range
10 µF to 6800 µF
Capacitance Tolerance
±20% @ 120 Hz and +20 °C
Rated Voltage
6.3, 10, 16, 25, 35, 50, 63, 80 & 100 Vdc
Operating Temperature Range
–55 ºC to +105 ºC
Leakage Current
0.01 CV or 3 µA @ +20 ºC, after two minutes (whichever is greater)
Ripple Current Multiplier
Frequency
Dissipation Factor
6.3V
50/60 Hz
120 Hz
1 kHz
10 kHz
100 kHz
0.70
.0.75
0.90
0.95
1.00
10 V
16 V
25 V
35 V
50 V
0.26
0.19
0.16
0.14
0.12
0.1
Add 0.02 per 1000 µF for values greater than 1000 µF
Low Temperature Impedance Ratio Characteristics at 120 Hz
Rated Voltage (Vdc)
63 V
80 V
100 V
0.08
0.08
0.07
6.3, 10, 16
25, 35, 50, 63, 80, 100
Z (-25°C)/Z(+20°C)
2
2
Z (-40°C)/Z(+20°C)
3
3
Z (-55°C)/Z(+20°C)
4
3
Life Test
2000 h @ 105 °C, 8.0 — 10.0 mm dia.
5000 h @ 105 °C, 12.5 — 18.0 mm dia.
∆ Capacitance ±30%
DF: ≤ 200% of limit
DCL: ≤ 100% of limit
Shelf Test
1000 h @ 105 °C
∆ Capacitance ±30%
DF: ≤ 200% of limit
DCL: ≤ 100% of limit
High Vibration Test
Capacitors with the high vibration base will pass a 30 G acceleration test from 5
Hz to 2000 Hz with a max. amplitude of 5 mm (peak to peak) for 2 hours each in
the X,Y and Z directions for a total of 6 hours. During the last 30 minutes of the
test, the measured capacitance shall be stable. After the test the capacitor shall
meet the following:
∆C at 120 Hz - Capacitance value will be within 5% of the initial value.
There will be no significant change in appearance.
RoHS Compliant
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type AFK_V, –55 °C to 105 °C, High Vibration
SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 °C
AFK Series Marking
Outline Drawing
Capacitance
(µF)
Voltage
j
A
C
E
V
H
J
K
2A
T
T
S
220
6.3Vdc
10Vdc
16Vdc
25Vdc
35Vdc
50Vdc
63Vdc
80Vdc
100Vdc
K
0.3 mm Max.
Series
T
A
I
FK
D
P
H
I
Lot No.
W
L
Case Dimensions
Size Code D ± 0.5
mm
L
A ± 0.2
B ± 0.2 H max.
F
I
w
P
K
R ± 0.2
S ± 0.2
T ± 0.2
E
8
6.5 ±0.3
8.3
8.3
9.5
-1 to +0.15
3.4
0.7 ± 0.1
2.2
.35 ± 0.2
0.70
5.3
1.7
F
8
10.5 ±0.3
8.3
8.3
10
-1 to +0.15
3.4
1.2 ± 0.2
3.1
.70 ± 0.2
0.70
5.3
1.3
G
10
10.5 ± 0.3
10.3
10.3
12
-1 to +0.15 3.5 1.2 ± 0.2 4.6 .70 ± 0.2
0.70
6.9
Type
AFK
–55
°C to
10513.5
°C 15
H
12.5
13.8 ±0.5
13.5
-1 to +0.15 4.7 1.2 ± 0.3 4.4 .70 ± 0.3
2.2
7.1
SMT
Aluminum
Lowest
105 °C
P
16
16.8 ± 0.5 Electrolytic
17
17
19Capacitors
-1 to +0.15 5.5 - 1.4
± 0.2 6.7 E.S.R.,
.70 ± 0.3
3.0
9.0
1.3
R Numbering
18
16.8System
± 0.5
19
Part
Part
Numbering
SystemM
AFK
106
AFK
106
19
21
-1 to +0.15
M
6.7
1.4 ± 0.2
6.7
.70 ± 0.3
3.0
11.0
1.9
B
12T
–F
80
E
16VT
–F
16
Vdc
10 = 16
10 Vdc
63
Vdc
50 = 63
50 Vdc
T =Width
Tape (mm)
& Reel
108
1000.0
107 = 100.0
µFµF
25
Vdc
16 = 25
16 Vdc
80
Vdc
63 = 80
63 Vdc
B
Bulk& Reel
T ==Tape
108 = 1000.0 µF
25 = 25 Vdc
2A
100Vdc
Vdc
80 =
= 80
V= High Vibration
M = ±20%
1.9
16
Type Capacitance Capacitance
Voltage Code
Case Packaging Code
= 1.0 µF
Tolerance 06 = 6.3
Vdc 35
= 35 Vdc Code
= Carrier tape
Type 105
Capacitance
Capacitance
Voltage
Code
Case 12Packaging
Code
106 = 10.0 µF
M = ±20% 10
Vdc
Tolerance
06 = 10
6.3 Vdc
Vdc 50
35 = 50
35 Vdc
Code 16 = Width
Carrier(mm)
tape
107
100.0
106 = 10.0
µFµF
2.4
RoHS
Compliant
RoHS
Compliant
2A = 100 Vdc
Typical
TypicalPerformance
PerformanceCurves
Curves
Capacitance vs. Temperature and Frequency
3300µF/6.3Vdc (12.5 x 13.5 mm)
Ratio to 25°C, 120 Hz Value
1.4
1.2
1
105
85°C
65°C
45°C
25°C
0.8
.
0.6
0°C
0.4
–20°C
–40°C
0.2
–55°C
0
10
100
1,000
10,000
100,000
1,000,000
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Capacitance vs. Temperature & Frequency
1.2
1
100 µF @ 16 Vdc (6.3 X 5.8 mm)
105°C 85°C
65°C
C
Corn
m
Ratio to
Ratio to 2
0°C
1
25°C
45°C
105°
85°C 65°C
Type AFK_V, –55 °C to 105 °C, High Vibration
Type AFK –55 °C to 105 °C
SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 °C
(Hz) 105 °C
SMT Aluminum Electrolytic Capacitors - Lowest Frequency
E.S.R.,
0.1
0.1
10
100
Typical Performance Curves
Typical Performance Curves
–40°C
–20°C
0°C
25°C
45°C
85°C 65°C
10
1
0.1
1,000
10,000
100,000
Frequency (Hz)
1,000,000
Impedance vs Temperature and Frequency
Ratings Table
45°C
85°C65°C
85°C
100
10
10001,000
100
0.1
330
AFK337M06E16VT-F
20.8
0.26
–55°C 0.26
470
AFK477M06F24VT-F
29.6
0.26
0.16
1000
AFK108M06F24VT-F
63
0.26
1500
AFK158M06G24VT-F
94.8
0.26
3300
AFK338M06H32VT-F
207.9
0.30
6800
220
AFK227M10E16VT-F
10 330
100
1000
AFK337M10F24VT-F
0.01
428.4
105°C
85°C
–40°C
–20°C
0.16
0.08
0°C
0.06
0.36 25°C
65°C 45°C
0.035
(AFK Series Typical Performance)
-5 1
–55°C
22
0.19
10000
33
100000
0.19
E
8 x 6.5
–40°C
1000
F
8 x 10.5
–20°C
500
0.16
600
F
8 0°C
x 10.5
500
0.08
850
G
10 x 10.5
500
0.06
1100
H45°C
12.5 x 13.8
200
0.035
500
1800
1000
1500
25°C
65°C
16 x 16.885°C
P
2000
2500
Time (Hours)
3000
125
105°C
3500
0.26
300
E
8 x 6.5
1000
600
F
8 x 10.5
500
0.16
0.16
600
F
8 x 10.5
500
2200
AFK228M10H32VT-F
0.19
0.001
Frequency (Hz)
Dissipation Factor vs.
600Temperature
F
8 x 10.5
0.16
3
500
0.08
850
GµF @ 6.310
x (4
10.5
47
Vdc
X 5.8 mm) 500
0.06
0.06
1100
100
Vdc
H µF @ 6.3
12.5
x (6.3
13.8X 5.8 mm)200
AFK478M10P44VT-F 1500 µF
470
@ 6.3 Vdc (100.25
x 10.2 mm)
0.035
0.035
1800
AFK688M10R44VT-F
680
0.29
0.033
0.033
AFK227M16E16VT-F
35.2
0.16
0.26
22 µF @ 6.3 Vdc (4 x 5.4 mm)
0.21
100 µF @ 6.3 Vdc ( 6.3 x 5.4 mm)
2
1000 µF @ 6.3 Vdc (8 X 10.2 mm)
P
16 x 16.8
125
2060
R
18 x 16.8
125
300
E
8 x 6.5
1000
16 Vdc (20 Vdc Surge)
-5
220
0.26
330
AFK337M16F24VT-F
52.8
0.16
0.16
470
AFK477M16F24VT-F
75.2
0.16
0.16
680
AFK687M16G24VT-F
108.8
0.16
0.08
1500
AFK158M16H32VT-F
240
0.16
3300
AFK338M16P44VT-F
528
0.2
-10
0.01
300
600
0.16
0.08
6800
-15
-20
0.26
(AFK Series Typical Performance)
220
3
-15
-204700
0
AFK478M16R44VT-F
500
1000
1500
752
2000
Time (Hours)
2500
0.22
3000
2
1
0
-60
10 • 1605 100
10,000 • New
100,000
Cornell Dubilier
E. Rodney1,000
French Blvd.
Bedford,1,000,000
MA 02744 • Phone: (508
0.16
04700
0.1
0.26
0.16
1000000
0.16
AFK108M10G24VT-F
100
-10
0
51000
680
10
1000000
1,000,000
Impedance vs. Temperature
and Frequency
22 µF @ 6.3 Vdc (4 x 5.4 mm)
10 Vdc (13 Vdc Surge)
Frequency (Hz)
AFK477M10F24VT-F
47
0.19
Capacitance
Change
vs.
Time
AFK687M10F24VT-F
68
0.19
470
Capacitance Change (%)
AFK688M06P44VT-F
100000
100,000
Frequency(Hz)
(Hz)
Frequency
0.01
0.001
105°C
10000
10,000
6.3 Vdc (8 Vdc Surge)
1
25°C
65°C 45°C
0.1
100 µF @ 16 Vdc (6.3 X 5.8 mm)
Ratio to 25°C, 120 Hz Value
10
25°C
100 µF @ 6.3 Vdc ( 6.3 x 5.4 mm)
10
Max.
Max.
Max. ESR
Size
0 Impedance
µF @ 6.3 Vdc (10 x 10.2 mm)
Dissipation
Ripple Current1500Case
Quantity
@100 kHz/20°C @100 kHz/20°C
DxL
Factor
@100 kHz/105°C Code
per Reel
(Ω)
(Ω)
(mm)
@120 Hz/20°C
(mA)
Max.
DCL
2 min.
(µA)
Capacitance Change (%)
Capacitance
(µF)
–20°C
0°C
0°C
1
5
D.F. (@ 120 Hz)
Ratio to 25°C, 120 Hz Value
Catalog
Part Number
–40°C
–20°C
1
Capacitance Change vs. Time
3300 µF /6.3 V (12.5 x13.5mm)
100
–55°C
–40°C
D.F. (@ 120 Hz)
100
10
0.1
10
10
–55°C
105°C
0.01
0.1
Impeda
100 µF @ 16 Vdc (6.3 X 5.8 mm)
100
Ratio to 25°C, 120 Hz Value
Ratio to 25°C, 120 Hz Value
Ratio to 25°C, 120 Hz Value
10
10
10
1,000,000
µF /6.3 V (12.5 x13.5mm)
ESR 3300
vs. Temperature
and Frequency
100
–55°C
105°
100,000
Ratio to 25°C, 120 Hz Value
3300 µF @6.3 Vdc (12.5 X 13.5 mm)
1
10,000
Impedance vs Temperature and Frequency
ESR vs. Temperature and Frequency
100
1,000
1
3500
0.16
600
F
8 x 10.5
500
0.16
600
F
8 x 10.5
500
0.08
850
G
10 x 10.5
500
0.06
0.06
1100
H
12.5x 13.8
200
0.035
0.035
1800
P
16 x 16.8
125
R
18 x 16.8
125
0.033
1
0
0.033
-60
2060
-10
40
90
140
Temperature (°C)
Cornell
Dubilier
• 1605
Rodney
French
Blvd.
• NewBedford,
Bedford,MA
MA02744
02744••Phone:
Phone:(508)996-8564
(508)996-8564••Fax:
Fax: (508)996-3830 •• www.cde.com
Cornell
Dubilier
• 1605
E. E.
Rodney
French
Blvd.
• New
www.cde.com.
Type AFK_V, –55 °C to 105 °C, High Vibration
SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 °C
Capacitance
(µF)
Catalog
Part Number
Max.
DCL
2 min.
(µA)
Max.
Max.
Max. ESR
Impedance
Dissipation
Ripple Current
@100 kHz/20°C @100 kHz/20°C
Factor
@100 kHz/105°C
(Ω)
(Ω)
@120 Hz/20°C
(mA)
T
Case
Code
Size
DxL
(mm)
Quantity
per Reel
25 Vdc (31 Vdc Surge)
100
AFK107M25E16VT-F
25
0.14
0.26
0.26
300
E
8 x 6.5
1000
150
AFK157M25F24VT-F
37.5
0.14
0.16
0.16
600
F
8 x 10.5
500
220
AFK227M25F24VT-F
55
0.14
0.16
0.16
600
F
8 x 10.5
500
330
AFK337M25F24VT-F
82.5
0.14
0.16
0.16
600
F
8 x 10.5
500
470
AFK477M25G24VT-F
117.5
0.14
0.08
0.08
850
G
10 x 10.5
500
1000
AFK108M25H32VT-F
250
0.14
0.06
0.06
1100
H
12.5 x 13.8
200
1500
AFK158M25P44VT-F
375
0.14
0.035
0.035
1800
P
16 x 16.8
125
2200
AFK228M25P44VT-F
550
0.16
0.035
0.035
1800
P
16 x 16.8
125
3300
AFK338M25R44VT-F
825
0.18
0.033
0.033
2060
R
18 x 16.8
125
100
AFK107M35F24VT-F
35
0.12
0.16
0.16
600
F
8 x 10.5
500
150
AFK157M35F24VT-F
52.5
0.12
0.16
0.16
600
F
8 x 10.5
500
35 Vdc (44 Vdc Surge)
220
AFK227M35F24VT-F
77
0.12
0.16
0.16
600
F
8 x 10.5
500
330
AFK337M35G24VT-F
115.5
0.12
0.08
0.08
850
G
10 x 10.5
500
470
AFK477M35H32VT-F
164.5
0.12
0.06
0.06
1100
H
12.5 x 13.8
200
680
AFK687M35H32VT-F
238
0.12
0.06
0.06
1100
H
12.5 x 13.8
200
1000
AFK108M35P44VT-F
350
0.12
0.035
0.035
1800
P
16 x 16.8
125
1500
AFK158M35P44VT-F
525
0.12
0.035
0.035
1800
P
16 x 16.8
125
50 Vdc (63 Vdc Surge)
33
AFK336M50E16VT-F
16.5
0.1
0.68
0.68
195
E
8 x 6.5
1000
47
AFK476M50E16VT-F
23.5
0.1
0.68
0.68
195
E
8 x 6.5
1000
100
AFK107M50F24VT-F
50
0.1
0.34
0.34
350
F
8 x 10.5
500
150
AFK157M50G24VT-F
75
0.1
0.18
0.18
670
G
10 x 10.5
500
220
AFK227M50G24VT-F
110
0.1
0.18
0.18
670
G
10 x 10.5
500
330
AFK337M50H32VT-F
165
0.1
0.12
0.12
900
H
12.5 x 13.8
200
390
AFK397M50H32VT-F
195
0.1
0.12
0.12
900
H
12.5 x 13.8
200
470
AFK477M50P44VT-F
235
0.1
0.073
0.073
1610
P
16 x 16.8
125
560
AFK567M50P44VT-F
280
0.1
0.073
0.073
1610
P
16 x 16.8
125
680
AFK687M50P44VT-F
340
0.1
0.073
0.073
1610
P
16 x 16.8
125
1000
AFK108M50P44VT-F
500
0.1
0.073
0.073
1610
P
16 x 16.8
125
1.2
120
E
8 x 6.5
1000
63 Vdc (75 Vdc Surge)
22
AFK226M63E16VT-F
13.9
0.08
1.2
33
AFK336M63F24VT-F
20.8
0.08
0.65
0.65
250
F
8 x 10.5
500
47
AFK476M63F24VT-F
29.6
0.08
0.65
0.65
250
F
8 x 10.5
500
68
AFK686M63G24VT-F
42.8
0.08
0.35
0.35
400
G
10 x 10.5
500
100
AFK107M63G24VT-F
63
0.08
0.35
0.35
400
G
10 x 10.5
500
150
AFK157M63H32VT-F
94.5
0.08
0.16
0.16
800
H
12.5 x 13.8
200
220
AFK227M63H32VT-F
138.6
0.08
0.16
0.16
800
H
12.5 x 13.8
200
470
AFK477M63P44VT-F
296.1
0.08
0.082
0.082
1410
P
16 x 16.8
125
680
AFK687M63R44VT-F
428.4
0.08
0.08
0.08
1690
R
18 x 16.8
125
Note: ≥50V, 8 and 10 mm Dia.; 235ºC peak solder temperature
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
C
m
Type AFK_V, –55 °C to 105 °C, High Vibration
SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 °C
Capacitance
(µF)
Catalog
Part Number
Max.
DCL
2 min.
(µA)
Max.
Max.
Max. ESR
Impedance
Dissipation
Ripple Current
@100 kHz/20°C @100 kHz/20°C
Case Code
Factor
@100 kHz/105°C
(Ω)
(Ω)
@120 Hz/20°C
(mA)
Size
DxL
(mm)
Quantity
per Reel
8 x 6.5
1000
80 Vdc (100 Vdc Surge)
10
AFK106M80E16VT-F
8
0.08
2.4
2.4
60
E
22
AFK226M80F24VT-F
17.6
0.08
1.3
1.3
130
F
8 x 10.5
500
33
AFK336M80F24VT-F
26.4
0.08
1.3
1.3
130
F
8 x 10.5
500
47
AFK476M80G24VT-F
37.6
0.08
0.7
0.7
200
G
10 x 10.5
500
68
AFK686M80H32VT-F
54.4
0.08
0.32
0.32
500
H
12.5 x 13.8
200
100
AFK107M80H32VT-F
80
0.08
0.32
0.32
500
H
12.5 x 13.8
200
150
AFK157M80H32VT-F
120
0.08
0.32
0.32
500
H
12.5 x 13.8
200
330
AFK337M80P44VT-F
264
0.08
0.17
0.17
793
P
16 x 16.8
125
470
AFK477M80R44VT-F
376
0.08
0.15
0.15
917
R
18 x 16.8
125
1.3
130
F
8 x 10.5
500
100 Vdc (125 Vdc Surge)
22
AFK226M2AF24VT-F
22
0.07
1.3
33
AFK336M2AG24VT-F
33
0.07
0.7
0.7
200
G
10 x 10.5
500
47
AFK476M2AH32VT-F
47
0.07
0.32
0.32
500
H
12.5 x 13.8
200
68
AFK686M2AH32VT-F
68
0.07
0.32
0.32
500
H
12.5 x 13.8
200
100
AFK107M2AP44VT-F
100
0.07
0.17
0.17
793
P
16 x 16.8
125
150
AFK157M2AP44VT-F
150
0.07
0.17
0.17
793
P
16 x 16.8
125
220
AFK227M2AR44VT-F
220
0.07
0.15
0.15
917
R
18 x 16.8
125
0.15
0.15
917
R
18 x 16.8
125
330
AFK337M2AR44VT-F
330
0.07
Note: ≥50V, 8 and 10 mm Dia.; 235ºC peak solder temperature
Reel Dimensions
mm
Case
Code
E
F
G
H
P
R
D
380
380
380
330
330
330
W
18
26
26
34
46
46
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type AFK_V, –55 °C to 105 °C, High Vibration
SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 °C
T
Case Code E, F and G Tape Dimensions
mm
Case Size
Case
Code
W ± 0.3
A ± 0.2
B +0.3/0.2
C±
0.2
F±
0.1
P±
0.1
t1
t2 ±
0.2
φd
+0.1/-0
P1 ±
0.1
P2 ±
0.1
W1 ±
0.1
0.4
6.8
1.5
2
4
1.75
8 x6.2
E
16
8.7
8.7
11.4
7.5
12
8 x 10.2
F
24
8.7
8.7
12.5
11.5
16
10 x 10.2
G
10.7
10.7
14.5
11
Recommended Land Dimensions
C
G
H
G
-
mm
F
D
Case Code Case Dia.
E
B
E
A
8
A
B
C
D
E
F
G
H
1.8
4.1
5.0
1.3
1.5
1.4
1.5
2.0
F
8
2.7
4.0
4.7
1.3
1.0
1.7
1.1
2.5
G
10
3.9
4.4
4.7
1.3
1.2
1.9
1.1
2.5
H
12.5
3.9
6.0
6.9
2.8
1.3
1.9
2.2
2.5
P
16
5.8
6.8
6.2
3.6
1.3
1.9
1.7
2.8
R
18
5.8
7.3
6.2
3.6
1.8
1.9
1.7
2.8
+
Case Code H, P and R Tape Dimensions
mm
Case Size
Case
Code
W ± 0.3
A ± 0.5
B ±0.5
C ± 0.5
F ± 0.1
S ± 0.1
P ± 0.1
12.5 x 13.5
H
32
14.0
14.0
18.0
14.2
28.4
24
16 x 16.5
P
17.5
17.5
23.00
18 x 16.5
R
19.5
19.5
26.00
20.2
40.4
44
28
32
t1
t2 ± 0.2
φd +0.1/-0 P1 ± 0.1 P2 ± 0.1
14.5
0.5
17.5
1.5
2
4
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
C
m
Type AFK_V, –55 °C to 105 °C, High Vibration
SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 °C
Recommended Reflow Soldering
300
250
Peak Temperature
t1 sec.
217°C
200
Temperature (ºC)
240°C
T2 sec.
160°C
150
120 seconds
100
50
Time (sec)
0
Case Code
Case Dia. (mm)
Voltage Rating
Peak Temperature
6.3, 10, 16, 25, 35
H, P, R
12.5,16, 18
50, 63
245°C
80, 100
Time at or above
240°C (t1)
Time at or
above 217°C
(T2)
Number of Reflow
Processes
30 seconds
90 seconds
2
5 seconds
30 seconds
2
5 seconds
30 seconds
1
300
Peak Temperature
250
255°C
5 sec.
60 sec.
230°C
200
160°C
Temperature (ºC)
150
120 seconds
100
50
0
Case
Code
Case Dia.
(mm)
E
8
F
8
G
10
E, F, G
8,10
Time (sec)
Voltage
(Vdc)
Peak
Time at or above Time at or above Time at or above
Temperature
255°C
230°C
200°C
Number of Reflow
Processes
1
6.3, 10, 16, 25,35
260°C
5 sec.
60 sec.
--
2
1
50, 63, 80, 100
235°C
--
5 sec.
60 sec.
1
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type AFK_V, –55 °C to 105 °C, High Vibration
SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 105 °C
AC
Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and
data (collectively, the “Information”) in this datasheet or other publication are subject to change. The
customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All
Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability
for certain applications are based on the knowledge that the Cornell Dubilier company providing such
statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards
as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee,
warranty or representation concerning the suitability for a specific customer application, use, storage,
transportation, or operating environment. The Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference
to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier),
and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although
Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design
and manufacturing of its products, in light of the current state of the art, isolated component failures may
still occur. Accordingly, customer applications which require a high degree of reliability or safety should
employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies
or other appropriate protective measures) in order to ensure that the failure of an electrical component
does not result in a risk of personal injury or property damage. Although all product-related warnings,
cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required.
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
4
Similar pages