AP1346/1347 Two Coil Fan Motor Predriver Features General Description - Compatible to a Hall element - Operating voltage (VCC) : 4V to 28V - Lock shutdown and automatic restart - Rotation detection (RD) output name as AP1347 - Speed indication output (FG) named as AP1346 - Output current IO=70mA (max) - Operating temperature (Topr) : -30ºC to +85ºC - SOP8 package - Include Thermal Shutdown circuit The AP1346/7 fan motor predriver is suited for two-coil brush-less DC fan. All functions, including lock shutdown, automatic restart, speed indication (FG), have been integrated into one chip. When the motor is under lock condition, lock shutdown function turns off the output. When the lock condition is removed, the IC automatically restarts and allows DC fan to run. In addition, the FG function is to indicate the rotation speed and the RD function is to detect the motor status. Application - High voltage, high current brushless DC fan Pin Assignment Pin Descriptions ( Top view ) VCC 1 8 OUT1 Name VCC HS(+) HS(+) 2 7 OUT2 FG /RD FG/RD 3 6 CT HS(-) 4 5 GND HS(-) GND CT OUT2 OUT1 AP1346/1347 SOP-8L Description Power input Hall input Speed indication / detection Hall input Ground Timing capacitor Driver output Driver output Rotation Ordering Information AP134X X - X X X Part Number 6: AP1346 7: AP1347 Wafer Body Package Lead S: SOP-8L L: Lead Free Blank or A~Z : if necessary Blank: Normal to specify Packing Blank : Tube A : Taping This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of this product. No rights under any patent accompany the sale of the product. Rev. 0.0 Jun 9, 2004 1/5 AP1346/1347 Two Coil Fan Motor Predriver Block Diagram VCC 1 Predriver 1 Reg. HS(+) 2 + 3 7 OUT2 6 CT 5 GND Automatic Restart Lock Detection HS(-) OUT1 Control Logic Hall amp - FG/RD Predriver 2 8 4 Application Circuit D2 L1 D1 Voltage Input C1 VCC R1 Q1 OUT1 Hall element Z11 Z1N R4 HS(+) L2 Q2 OUT2 R2 V1 AP1346/ AP1347 Z2N R6 HS(-) FG/RD CT C2 R5 Z21 output GND Anachip Corp. www.anachip.com.tw Rev 0.0 Jun 9, 2004 2/5 AP1346/1347 Two Coil Fan Motor Predriver Absolute Maximum Ratings (TA=25ºC) Parameter Symbol Rating Unit Input voltage VCC 30 V Output current IOUT 70 mA Allowable power dissipation PD 550*(note1) mW Operating temperature TOPR -30 to +85 ºC Storage temperature TSTG -55 to +125 ºC *note1 : Reduced by 5.5mW for each increase in Ta of 1ºC over 25 ºC Electrical Characteristics ( T =25ºC, V A Parameter Symbol =12V, unless otherwise noted) CC Conditions Min. 4 Rating Typ. Max. -28 Unit Input voltage VIN V Hall input voltage (DC+AC) VBH Includes the amplitude of signal 1 -- VCC-0.5 V Supply current ICC The output is off -- 4 5.5 mA Hall amp input hysteresis (+) VHYS+ Delta V when VBH=6V 3 -- 15 mV Hall amp input hysteresis (-) VHYS- Delta V when VBH=6V -15 -- -3 mV Charge current ICHG VCT = 1.5V 7.7 9.6 11.5 uA Discharge current IDHG VCT = 1.5V 0.19 0.24 0.29 uA Charge/discharge ratio RCD ICHG/IDCHG 32 40 48 -- Clamp voltage VCL 1.6 2.0 2.4 V Comparator voltage VCP 0.8 1.0 1.2 V 10 -- 10.5 -- -0.5 V V 8 -- -- mA Output high level FG / RD pin output low FG / RD pin sink current capacity VOH IO = 10mA VFGL / VRDL IFG = 5mA / IRD = 5mA IFG / IRD VFGL = 2V / VRDL = 2V Anachip Corp. www.anachip.com.tw Rev 0.0 Jun 9, 2004 3/5 AP1346/1347 Two Coil Fan Motor Predriver Performance Characteristics 25 550 95 242 Ta (°C) Pd (mW) Ta (°C) Pd (mW) 50 440 100 220 60 396 105 198 70 352 110 176 80 308 115 154 85 286 120 132 90 264 125 110 P o w e r D is s ip a tio n C u rve P d (m W ) 600 500 400 300 200 100 0 0 25 50 75 85 100 125 150 T a (。 C ) Note:SOP-8L package. Marking Information (Top View) 8 Logo 6 5 Blank : normal L : Lead Free Package AC AP1347 YY WW X X Date code X: internal code WW: Xth week,01-52 Y: Year, "01"=2001 "02"=2002 ~ Part Number 7 1 2 3 4 SOP-8L Note: For AP1346, part number is marked as AP1346. Anachip Corp. www.anachip.com.tw Rev 0.0 Jun 9, 2004 4/5 AP1346/1347 Two Coil Fan Motor Predriver Package Information H E Package Type: SOP-8L L VIEW "A" D 0.015x45 7 (4X) e B A1 C A A2 7 (4X) VIEW "A" y Symbol A A1 A2 B C D E e H L y θ Dimensions In Millimeters Min. Nom. Max. 1.40 1.60 1.75 0.10 0.25 1.30 1.45 1.50 0.33 0.41 0.51 0.19 0.20 0.25 4.80 5.05 5.30 3.70 3.90 4.10 1.27 5.79 5.99 6.20 0.38 0.71 1.27 0.10 0O 8O Anachip Corp. www.anachip.com.tw Dimensions In Inches Min. Nom. Max. 0.055 0.063 0.069 0.040 0.100 0.051 0.057 0.059 0.013 0.016 0.020 0.0075 0.008 0.010 0.189 0.199 0.209 0.146 0.154 0.161 0.050 0.228 0.236 0.244 0.015 0.028 0.050 0.004 0O 8O Rev 0.0 Jun 9, 2004 5/5