UNISONIC TECHNOLOGIES CO., LTD MJE13003D NPN SILICON TRANSISTOR HIGH VOLTAGE FAST-SWITCHING NPN POWER TRANSISTOR DESCRIPTION The UTC MJE13003D is a NPN Power Transistor. It is intended to be used in applications requiring medium voltage capability and high switching speeds. FEATURES * Fast-Switching And High Voltage Capability * Dynamic Parameters With Low Spread * High Reliability * Integrated Antiparallel Collector-Emitter Diode INTERNAL SCHEMATIC DIAGRAM C (2) B (1) E (3) ORDERING INFORMATION Ordering Number Package Lead Free Halogen Free MJE13003DL-x-T60-K MJE13003DG-x-T60-K TO-126 MJE13003DL-x-TA3-T MJE13003DG-x-TA3-T TO-220 MJE13003DL-x-TM3-T MJE13003DG-x-TM3-T TO-251 MJE13003DL-x-TN3-R MJE13003DG-x-TN3-R TO-252 MJE13003DL-x-T92-B MJE13003DG-x-T92-B TO-92 MJE13003DL-x-T92-K MJE13003DG-x-T92-K TO-92 MJE13003DL-x-T92-A-B MJE13003DG-x-T92-A-B TO-92 MJE13003DL-x-T92-A-K MJE13003DG-x-T92-A-K TO-92 Note: Pin Assignment: E: Emitter B: Base C: Collector www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd Pin Assignment 1 2 3 B C E B C E B C E B C E B C E B C E E C B E C B Packing Bulk Tube Tube Tape Reel Tape Box Bulk Tape Box Bulk 1 of 5 QW-R204-025.I MJE13003D NPN SILICON TRANSISTOR MARKING PACKAGE MARKING TO-220 / TO-251 / TO-252 TO-126 TO-92 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 5 QW-R204-025.I MJE13003D NPN SILICON TRANSISTOR ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Collector- Emitter Voltage (VBE =0) VCES 700 V Collector-Emitter Voltage (IB =0) VCEO 400 V Emitter-Base Voltage (IC=0, IB=0.75A, tP<10μS) VEBO 9 V Collector Current IC 1.5 A Collector Peak Current (tP<5ms) ICM 3 A Base Current IB 0.75 A Base Peak Current (tP<5ms) IBM 1.5 A TO-126 1.4 W TO-92 1.1 W TA=25°C TO-220 2 W TO-251/TO-252 1.56 W PD Power Dissipation TO-126 20 W TO-92 1.5 W TC=25°C TO-220 40 W TO-251/TO-252 25 W Junction Temperature TJ 150 °C Storage Temperature TSTG -55 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS (TC=25°C, unless otherwise specified) PARAMETER Emitter-Base Breakdown Voltage Collector-Emitter Sustaining Voltage (Note) Collector Cut-Off Current SYMBOL BVEBO VCEO(SUS) ICES Collector-Emitter Saturation Voltage (Note) VCE(SAT) Base-Emitter Saturation Voltage (Note) VBE(SAT) hFE1 hFE2 tR tS tF DC Current Gain Rise Time Storage Time Fall Time Resistive Load TEST CONDITIONS IE =10mA, IC=0 IC=10mA, IB=0 VCE =700V,VBE =0 IC=0.5 A, IB=0.1 A IC=1 A, IB=0.25 A IC=1.5 A, IB=0.5 A IC=0.5 A, IB=0.1 A IC=1 A, IB=0.25 A IC=0.5A, VCE =5 V IC=1 A, VCE =5 V VCC=125 V, IC=1 A, IB1=0.2 A, IB2=-0.2 A, tP=25μs IC=1 A, IB1=0.2 A,VBE =-5 V, L=50mH, VCLAMP=300V VF Diode Forward Voltage IF=0.5 A Pulse Test: Pulse duration ≤ 300μs, Duty cycle ≤ 2%. Note: tS Inductive Load Storage Time MIN 9 400 14 5 TYP MAX UNIT 18 V V 1 mA 0.5 V 1 V 3 V 1 V 1.2 V 57 30 1 μs 4 μs 0.7 μs 0.8 μs 1.5 V CLASSIFICATION OF hFE1 RANK RANGE A 14 ~ 22 B 21 ~ 27 C 26 ~ 32 D 31 ~ 37 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw E 36 ~ 42 F 41 ~ 47 G 46 ~ 52 H 51 ~ 57 3 of 5 QW-R204-025.I MJE13003D NPN SILICON TRANSISTOR TEST CIRCURTS Inductive Load Switching Test Circuit (3) IC (1) IB VCE RBB(2) VBB VClamp + VCC Notes: 1. Fast Electronic Switch 2. Non-Inductive Resistor 3. Fast Recovery Rectifier Resistive Load Switching Test Circuit IC (1) RC(2) IB VCE RBB(2) VBB + VCC Notes: 1. Fast Electronic Switch 2. Non-Inductive Resistor UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 5 QW-R204-025.I MJE13003D Collector Current, IC (mA) Collector Current, IC (mA) TYPICAL CHARACTERISTICS Emitter Current vs. Emitter-Base Voltage 14 12 Emitter Current, IE (mA) NPN SILICON TRANSISTOR 10 8 6 4 2 0 0 2 4 6 8 10 12 14 16 20 Emitter-Base Voltage, VEBO (V) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R204-025.I