Document 204 Backlight Inductors – DO1607B Series The low profile DO1607B Series has the high breakdown voltage ratings required for backlight applications. Only 2,49 mm high, they have a footprint of 6,6 × 4,5 mm. These inductors are constructed of high temperature materials that provide excellent heat deflection to prevent damage during solder reflow. Standard inductance values range from 1 to 6.8 mH and custom values are available to meet specific requirements. Coilcraft Designer’s Kit C335 contains samples of each of the standard parts shown. To order, contact Coilcraft or visit http://order.coilcraft.com. Typical Inductance vs. Current 7 6.8 mH Part number1 DO1607B-105ML_ DO1607B-155ML_ DO1607B-225ML_ DO1607B-335ML_ DO1607B-475ML_ DO1607B-685ML_ L2 DCR3 Insulation ±20% max core-winding Isat4 (mH) (Ohms) (MOhms) (mA) 1.0 19 >10 100 1.5 21 >10 75 2.2 42 >10 60 3.3 52 >10 50 4.7 80 >10 45 6.8 125 >10 40 Irms5 (mA) 150 140 100 90 75 60 Inductance (mH) 6 5 4.7 mH 4 3 3.3 mH 2 2.2 mH 1 1.5 mH 1.0 mH 0 0 80 100 120 140 160 0.260 max 6,60 0.175 max 4,45 0.055 1,40 0.050 1,27 0.140 3,56 0.090 2,29 0.215 5,46 0.040 1,02 0.170 min 4,32 Recommended Land Pattern 0.155 3,94 dia 0.098 max 2,49 Dimensions are in 0.070 1,78 inches mm Dash number XXX 2. Inductance tested at 0.1 Vrms, 100 kHz, 0 Adc on Agilent/HP 4192A. 3. DCR tested on Cambridge Technology 510-A with Coilcraft CCF‑859 fixture. 4. DC current at which the inductance drops 10% (typ) from its value without current. 5. Average current for a 40°C rise above 25°C ambient. 6. Operating temperature -40°C to +85°C. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. 60 XXX DO1607B-685MLC 40 Current (mA) 1. When ordering, please specify termination and packaging codes: Termination: L = RoHS compliant electroplated gold (<50 µin) over nickel over moly-manganese. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape (2500 parts per full reel). 20 Part marking since Feb. 2005. Parts manufactured prior to that date may have color dots. Weight: 0.12 – 0.13 Visit g www.coilcraft.com/colrpowr.cfm Tape and reel: 750/7″ reel; 2500/13″ reel Plastic for color dot marking details.tape: 12 mm wide, 0.28 mm thick, 8 mm pocket spacing, 3.0 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. Document 204 Revised 01/24/05