Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 2242711004 Item: MK04-1A66B-10000W Magnetic properties Pull-In Test equipment Conditions Min Typ at 20°C Special Product Data Number of contacts Contact - form Contact rating Switching voltage Carry current Switching current Sensor-resistance Housing material Case colour Sealing compound Reach / RoHS conformity Remark Environmental data Shock Vibration Operating temperature Operating temperature Storage temperature Remark Mounting advice Mounting advice Mounting advice Remark Tightening torque Unit Max Unit KMS-14 Conditions Min Typ 1 A - NO not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC measured with 40% overdrive PBT glass fibre reinforced white Polyurethan yes Maximum current Imax. = 87 mA Conditions Min Typ Max Unit Min Typ Max Unit 1/2 sine, duration 11ms, in 3 axis from 10 - 2000 Hz cable not moved cable moved Conditions General data Max over 5m cable, a resistor is recommended. Decreased switching distances by mounting on iron. Magnetically conductive screws must not be used. resistor 33Ohm; 5%; 0,25W; type 0204 ! " #$% & '" Disk ISO 7089 Modifications in the sense of technical progress are reserved Designed at: 14.04.11 Designed by: WKOVACS Approval at: 14.04.11 Approval by: DKUECHLER Last Change at: 05.07.11 Last Change by: KSTOPPEL Approval at: 05.07.11 Approval by: DKUECHLER Version: 02