Diodes DISRT-2400-1A 25 amp soft recovery fast switching tab mounted diode Datasheet

DIOTEC ELECTRONICS CORP
18020 Hobart Blvd., Unit B
Gardena, CA 90248 U.S.A
Tel.: (310) 767-1052 Fax: (310) 767-7958
Data Sheet No. DISRT-2400-1A
25 AMP SOFT RECOVERY FAST SWITCHING TAB MOUNTED DIODES
MECHANICAL SPECIFICATION
FEATURES
VOID FREE Vacuum Die Soldering For Maximum
Mechanical Strength And Heat Dissipation
(Solder Voids: Typical < 2%, Max. < 10% of Die Area)
f
True Soft Recovery Characteristic With No Ringing,
Spikes, or Overshoot
HIGH Frequency: 250 kHz
FAST Recovery: 100nS - 150nS
Unmatched Performance - Minimal RFI/EMI,
Reduced Power Losses, Extremely Cool Operation
Increased Power Supply Efficiency
PIN 1 CATHODE
PIN 2 ANODE
MECHANICAL DATA
Structure: Epoxy encapsulated diode body with metal tabs
Finish: All external surfaces are corrosion resistant and
readily solderable
Die Size:
0.180" x 0.180"
Square
o
Maximum Soldering Temperature: 250 C 3/8“ from case
for 10 seconds
Mounting: Lead or chassis mounted, same configuration as TO-220AB
Mounting Torque: 8 in-lbs Max.
Polarity: Cathode to Tab With Hole; Reverse polarity available
by adding the suffix "R" to the P/N (e.g., MR2400FR )
Weight: 1.2 Ounces (3.6 Grams), approximately
S
RoH
C
A
PLI
M
O
NT
f
MAXIMUM RATINGS & ELECTRICAL CHARACTERISTICS
Ratings at 25 °C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive loads, derate current by 20%.
PARAMETER (TEST CONDITIONS)
SYMBOL
RATINGS
UNITS
MR
MR
MR
MR
MR
SRP
3501S2401F 2402F 2404F 2406F
2400F
Series Number
Maximum DC Blocking Voltage
VRM
50
100
200
400
600
Maximum RMS Voltage
VRMS
35
70
140
280
420
Maximum Peak Recurrent Reverse Voltage
VRRM
50
100
200
400
600
Average Forward Rectified Current
IO
25
IFSM
400
AMPS
Peak Forward Surge Current (8.3mS single half sine wave
superimposed on rated load)
VFM
Maximum Forward Voltage at 25 Amps DC
o
Maximum Average DC Reverse Current
@ TC =
At Rated DC Blocking Voltage
@ TC = 125 C
25 C
o
IRM
1.2 (Typical 1.1)
VOLTS
1.0
50
mA
°C/W
Typical Thermal Resistance, Junction to Case
RqJC
0.8
Maximum Reverse Recovery Time - Soft Recovery
TRR
150 (Typ. 100)
TJ, TSTG
-65 to +150
Junction Operating and Storage Temperature Range
VOLTS
nSec
°C
Similar pages