To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and “Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. “Standard”: 8. 9. 10. 11. 12. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. “High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. “Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics. HAT2279H Silicon N Channel Power MOS FET Power Switching REJ03G1464-0200 Rev.2.00 Jul 05, 2006 Features • • • • • High speed switching Capable of 4.5 V gate drive Low drive current High density mounting Low on-resistance RDS(on) = 9.5 mΩ typ. (at VGS = 10 V) • Lead Free Outline RENESAS Package code: PTZZ0005DA-A) (Package name: LFPAK ) 5 D 5 3 12 4 G 4 1, 2, 3 Source 4 Gate 5 Drain S S S 1 2 3 Absolute Maximum Ratings (Ta = 25°C) Item Drain to source voltage Gate to source voltage Drain current Drain peak current Body-drain diode reverse drain current Avalanche current Avalanche energy Channel dissipation Channel to Case Thermal Resistance Channel temperature Storage temperature Notes: 1. PW ≤ 10 µs, duty cycle ≤ 1% 2. Value at Tch = 25°C, Rg ≥ 50 Ω 3. Tc = 25°C Rev.2.00 Jul 05, 2006 page 1 of 7 Symbol VDSS VGSS ID ID(pulse)Note1 IDR IAP Note 2 EAR Note 2 Ratings 80 ±20 30 120 30 25 83 Unit V V A A A A mJ Pch Note3 θch-C Tch Tstg 25 5 150 –55 to +150 °C/W °C °C W HAT2279H Electrical Characteristics (Ta = 25°C) Item Drain to source breakdown voltage Gate to source leak current Zero gate voltage drain current Gate to source cutoff voltage Static drain to source on state resistance Forward transfer admittance Input capacitance Output capacitance Reverse transfer capacitance Gate Resistance Total gate charge Gate to source charge Gate to drain charge Turn-on delay time Rise time Turn-off delay time Fall time Body–drain diode forward voltage Body–drain diode reverse recovery time Notes: 4. Pulse test Rev.2.00 Jul 05, 2006 page 2 of 7 Symbol V(BR)DSS IGSS IDSS VGS(off) RDS(on) RDS(on) |yfs| Ciss Coss Crss Rg Qg Qgs Qgd td(on) tr td(off) tf VDF trr Min 80 — — 0.8 — — 42 — — — — — — — — — — Typ — — — — 9.5 11 70 3520 410 160 0.5 60 9.5 9.0 9.5 14.5 56 Max — ±0.5 1 2.3 12 15 — — — — — — — — — — — Unit V µA µA V mΩ mΩ S pF pF pF Ω nC nC nC ns ns ns — — — 9.5 0.83 50 — 1.08 — ns V ns Test Conditions ID = 10 mA, VGS = 0 VGS = ±20 V, VDS = 0 VDS = 80 V, VGS = 0 VDS = 10 V, I D = 1 mA ID = 15 A, VGS = 10 V Note4 ID = 15 A, VGS = 4.5 V Note4 ID = 15 A, VDS = 10 V Note4 VDS = 10 V, VGS = 0, f = 1 MHz VDD = 25 V, VGS = 10 V, ID = 30 A VGS = 10 V, ID = 15 A, VDD ≅ 30 V, RL = 2 Ω, Rg = 4.7 Ω IF = 30 A, VGS = 0 Note4 IF = 30 A, VGS = 0 diF/ dt = 100 A/ µs HAT2279H Main Characteristics Power vs. Temperature Derating Maximum Safe Operation Area 1000 Drain Current ID (A) Channel Dissipation Pch (W) 40 30 20 10 0 50 100 150 PW 10 Op er 1 = 10 m s 10 at ion 1 Tc 0µ s m s = Operation in this area is limited by RDS(on) 0.1 25 °C Ta = 25°C 1 shot Pulse 0.1 1 10 100 Case Temperature Tc (°C) Drain to Source Voltage VDS (V) Typical Output Characteristics Typical Transfer Characteristics 50 3.1 V VDS = 10 V Pulse Test 10 V 2.9 V Drain Current ID (A) Drain Current ID (A) DC 0.01 0.01 200 50 40 10 µs 100 30 2.7 V 20 10 VGS = 2.5 V 40 30 20 Tc = 75°C 25°C 10 –25°C Pulse Test 0 2 4 6 Drain to Source Voltage 8 0 10 VDS (V) 160 120 ID = 10 A 80 5A 40 0 2A 4 8 12 16 20 Gate to Source Voltage VGS (V) Rev.2.00 Jul 05, 2006 page 3 of 7 3 5 4 Static Drain to Source on State Resistance vs. Drain Current Drain to Source On State Resistance RDS(on) (mΩ) Drain to Source Voltage VDS(on) (mV) Pulse Test 2 Gate to Source Voltage VGS (V) Drain to Source Saturation Voltage vs. Gate to Source Voltage 200 1 100 VGS = 4.5 V 10 10 V Pulse Test 1 1 10 100 Drain Current ID (A) 1000 Static Drain to Source on State Resistance vs. Temperature Forward Transfer Admittance |yfs| (S) Forward Transfer Admittance vs. Drain Current 30 Pulse Test 25 VGS = 4.5 V 20 15 ID = 2 A, 5 A, 10 A 10 VGS = 10 V 2 A, 5 A, 10 A 5 0 –25 0 25 50 75 100 125 150 1000 100 Tc = –25°C 25°C 10 75°C 1 0.1 0.1 VDS = 10 V Pulse Test 0.3 1 3 10 30 Case Temperature Tc (°C) Drain Current ID (A) Body-Drain Diode Reverse Recovery Time Typical Capacitance vs. Drain to Source Voltage 100 10000 1000 Capacitance C (pF) Ciss 100 10 1 0.1 1 3 10 30 100 300 Coss 100 Crss VGS = 0 f = 1 MHz 10 0 20 30 40 50 Reverse Drain Current IDR (A) Drain to Source Voltage VDS (V) Dynamic Input Characteristics Switching Characteristics 20 80 16 VDS = 50 V 25 V 10 V VGS VDS 40 12 8 20 4 VDS = 50 V 25 V 10 V 20 40 60 80 Gate Charge Qg (nc) Rev.2.00 Jul 05, 2006 page 4 of 7 0 100 1000 VGS = 10 V, VDS = 30 V Rg = 4.7 Ω, duty ≤ 1 % Switching Time t (ns) ID = 30 A 0 1000 10 0.3 100 60 3000 30 di/dt = 100 A/µs VGS = 0, Ta = 25°C Gate to Source Voltage VGS (V) Drain to Source Voltage VDS (V) Reverse Recovery Time trr (ns) Static Drain to Source on State Resistance RDS(on) (mΩ) HAT2279H 100 td(off) tf 10 td(on) tr 1 0.1 1 10 Drain Current ID (A) 100 HAT2279H Reverse Drain Current vs. Source to Drain Voltage Repetitive Avalanche Energy EAR (mJ) Maximum Avalanche Energy vs. Channel Temperature Derating Reverse Drain Current IDR (A) 50 40 30 10 V VGS = 0 V, –5 V 20 10 Pulse Test 0 0.4 0.8 1.2 1.6 2.0 100 IAP = 25 A VDD = 50 V duty < 0.1% Rg ≥ 50 Ω 80 60 40 20 0 25 50 75 100 125 150 Channel Temperature Tch (°C) Source to Drain Voltage VSD (V) Normalized Transient Thermal Impedance γs (t) Normalized Transient Thermal Impedance vs. Pulse Width 3 Tc = 25°C 1 D=1 0.5 0.3 0.2 0.1 θch - c(t) = γs (t) • θch - c θch - c = 5°C/ W, Tc = 25°C 0.1 0.05 0.02 1 0.0 0.03 0.01 10 1s PDM t ho pu D= lse PW T PW T 100 1m 10 m 100 m 1 10 Pulse Width PW (s) Avalanche Test Circuit VDS Monitor Avalanche Waveform EAR = L 1 2 L • IAP2• VDSS VDSS – VDD IAP Monitor V(BR)DSS IAP Rg D. U. T VDS VDD ID Vin 15 V 50 Ω 0 Rev.2.00 Jul 05, 2006 page 5 of 7 VDD HAT2279H Switching Time Test Circuit 90% Vout Monitor Vin Monitor Rg Waveform D.U.T. RL Vin Vout Vin 10 V VDD = 30 V 10% 10% 90% td(on) Rev.2.00 Jul 05, 2006 page 6 of 7 10% tr 90% td(off) tf HAT2279H Package Dimensions JEITA Package Code SC-100 Previous Code LFPAKV RENESAS Code PTZZ0005DA-A 4.9 5.3 Max 4.0 ± 0.2 MASS[Typ.] 0.080g +0.05 3.3 1.0 0.25 –0.03 Unit: mm 4.2 6.1 –0.3 +0.1 3.95 5 4 +0.05 0.20 –0.03 1.1 Max +0.03 0.07 –0.04 0° – 8° +0.25 1 0.6 –0.20 1.3 Max Package Name LFPAK 0.75 Max 0.10 1.27 0.40 ± 0.06 0.25 M (Ni/Pd/Au plating) Ordering Information Part Name HAT2279H-EL-E Quantity 2500 pcs Shipping Container Taping Note: For some grades, production may be terminated. Please contact the Renesas sales office to check the state of production before ordering the product. Rev.2.00 Jul 05, 2006 page 7 of 7 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145 Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 © 2006. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .6.0