Total Power MSLU100 Smd package with industry standard pinout Datasheet

FEATURES
►SMD Package with Industry Standard Pinout
►Small Footprint:
11.0 x 13.7 mm (0.43”x 0.54”) Single Output Models
11.0 x 16.3 mm (0.43”x 0.64”) Dual Output Models
►I/O-Isolation 1500 VDC
►Single and Dual Output Models
►Operating Temp. Range –40°C to +85°C
►High Accuracy of Pin Planarity
►Qualified for lead-free reflow solder process according
IPC/JEDEC J-STD-020D
►Tape & Reel Package available
►3 Year Product Warranty
PRODUCT OVERVIEW
The MSLU100 series is a range of 1W DC/DC converters in a SMD- Package featuring I/O-isolation of 1500VDC.The very small footprint makes this
product the ideal solution for many applications where a voltage has to be isolated i.e for noise reduction, ground loop elimination, in digital interfaces or
where a converted voltage is required.
An excellent efficiency allows an operating temperature range of –40°C to +85°C. With a new package design these converters are fully qualified for the
higher temperature profile used in lead-free reflow solder processes. For automated SMD production lines the product can be supplied in tape& reel
package.
Model Selection Guide
Model
Input
Output
Number
Voltage
Voltage
(Range)
VDC
MSLU101
MSLU102
MSLU103
MSLU104
MSLU105
MSLU106
MSLU108
MSLU109
MSLU111
MSLU112
MSLU113
MSLU114
MSLU115
MSLU116
MSLU118
MSLU119
MSLU154
MSLU155
MSLU121
MSLU122
MSLU123
MSLU124
MSLU125
MSLU126
MSLU128
MSLU129
5
(4.5 ~ 5.5)
12
(10.8 ~ 13.2)
15
(13.5 ~ 16.5)
24
(21.6 ~ 26.4)
VDC
3.3
5
9
12
15
±5
±12
±15
3.3
5
9
12
15
±5
±12
±15
12
15
3.3
5
9
12
15
±5
±12
±15
Output Current
Input Current
Max.
Min.
@Max. Load
@No Load
mA
300
200
110
84
67
±100
±42
±33
300
200
110
84
67
±100
±42
±33
84
67
300
200
110
84
67
±100
±42
±33
mA
6
4
2
1.5
1
±2
±0.8
±0.7
6
4
2
1.5
1
±2
±0.8
±0.7
1.5
1
6
4
2
1.5
1
±2
±0.8
±0.7
mA(typ.)
271
256
254
259
254
270
259
254
112
109
106
106
105
113
108
104
86
86
58
54
54
55
53
57
54
53
mA(typ.)
30
15
14
8
9
Load
Max. capacitive
Regulation
Load
Toll Free: 877-646-0900
(typ.)
@Max. Load
% (max.)
10
10
10
8
7
10
8
7
8
8
8
5
5
8
5
5
5
5
8
8
8
5
5
8
5
5
uF
33
33#
33
33#
33
33
33#
# For each output
In
Total Power International,
Inc
Efficiency
www.total-power.com
%
73
78
78
78
79
74
78
78
74
76
78
79
80
74
78
79
78
78
72
78
77
77
79
73
78
78
MSLU100 SERIES
Total Power International, Inc.
Tota
DC/DC CONVERTER 1W, SMD-Package
Input Specifications
Parameter
Input Voltage Range
Input Surge Voltage (1 sec. max.)
Model
Min.
Typ.
5V Input Models
4.5
5
5.5
12V Input Models
10.8
12
13.2
15V Input Models
13.5
15
16.5
24V Input Models
21.6
24
26.4
5V Input Models
-0.7
---
9
12V Input Models
-0.7
---
18
15V Input Models
-0.7
---
20
24V Input Models
-0.7
---
30
---
---
0.3
Reverse Polarity Input Current
All Models
Input Filter
Max.
Unit
VDC
A
Internal Capacitor
Internal Power Dissipation
---
---
450
mW
Output Specifications
Parameter
Output Voltage Balance
Line Regulation
Load Regulation
Ripple & Noise (20MHz)
Ripple & Noise (20MHz)
Ripple & Noise (20MHz)
Temperature Coefficient
Short Circuit Protection
Conditions
Dual Output, Balanced Loads
For Vin Change of 1%
Io=20% to 100%
Min.
-----
Typ.
Max.
±0.1
±1.0
±1.2
±1.5
See Model Selection Guide
60
120
--150
--15
±0.01
±0.02
0.5 Second Max.
---------
Over Line, Load & Temp.
Unit
%
%
mV P-P
mV P-P
mV rms
%/℃
General Specifications
Parameter
Conditions
Min.
Typ.
Max.
Unit
60 Seconds
1500
---
---
VDC
I/O Isolation Resistance
500 VDC
1000
---
---
MΩ
I/O Isolation Capacitance
100KHz, 1V
---
40
100
pF
50
100
140
KHz
2,000,000
---
---
Hours
I/O Isolation Voltage (rated)
Switching Frequency
MTBF (calculated)
Moisture Sensitivity Level (MSL)
MIL-HDBK-217F@25℃, Ground Benign
IPC/JEDEC J-STD-020D
Level 2
Input Fuse
5V Input Models
500mA Slow-Blow Type
12V Input Models
200mA Slow-Blow Type
15V Input Models
150mA Slow-Blow Type
24V Input Models
100mA Slow-Blow Type
Environmental Specifications
Parameter
Operating Temperature Range (with Derating)
Case Temperature
Storage Temperature Range
Humidity (non condensing)
Cooling
Lead Temperature (1.5mm from case for 10Sec.)
In
Total Power International,
Inc
Conditions
Ambient
Toll Free: 877-646-0900
Min.
-40
---50
--Free-Air convection
---
Max.
+85
+90
+125
95
Unit
℃
℃
℃
% rel. H
260
℃
www.total-power.com
MSLU100 SERIES
Total Power International, Inc.
Tota
DC/DC CONVERTER 1W, SMD-Package
+20%
+20%
+20%
+20%
+15%
+15%
+15%
+15%
+10%
+10%
+10%
Max.
+5%
Output Voltage(%)
Output Voltage(%)
Output Voltage Tolerance
+5%
Typ.
Vnom
Vnom
Min.
-5%
-5%
-10%
0%
20%
40%
60%
-10%
100%
80%
+10%
Max.
+5%
+5%
Typ.
Vnom
Vnom
Min.
-5%
-5%
-10%
0%
20%
40%
Output Load Current (%)
60%
80%
Output Load Current (%)
(3.3V & 5V Output)
(All other Output)
Power Derating Curve
100
Natural
Convection
20LFM
80
100LFM
60
200LFM
400LFM
40
20
0
~
-40
0
20
40
60
80
100 110
Ambient Temperature ]
Notes
1
Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted.
2
Ripple & Noise measurement bandwidth is 0-20MHz.
3
These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these
4
All DC/DC converters should be externally fused at the front end for protection.
modules; however they may not meet all specifications listed.
5
Other input and output voltage may be available, please contact factory.
6
That “natural convection” is about 20LFM but is not equal to still air (0 LFM).
7
Specifications subject to change without notice.
8
It is not recommended to use water-washing process on SMT units.
In
Total Power International,
Inc
Toll Free: 877-646-0900
www.total-power.com
-10%
100%
MSLU100 SERIES
Total Power International, Inc.
Tota
DC/DC CONVERTER 1W, SMD-Package
Package Specifications
Mechanical Dimensions (Single Output)
Connecting Pin Patterns
2.54
[0.1]
5.08
[0.2]
13.7 [0.54]
1.7 [0.07]
10.6 [0.42]
0~
4
R
0.
5
4
2
11.0 0.2
[0.43 0.008]
1
8.0 [0.31]
5
8
7.62 [0.30]
0.25 [0.01]
3.04
[0.12]
( Magnification of A )
0.60 [0.02]
7.0 0.5
[0.28 0.02]
1.5 0.1
[0.06 0.004]
5.5
[0.22]
5.5
[0.22]
1.5 0.1
[0.06 0.004]
0.15 S
Mechanical Dimensions (Dual Output)
Connecting Pin Patterns
5
2.54
[0.1]
5.08
[0.2]
16.24 [0.64]
0.25 [0.01]
7.62 [0.30]
2.54
[0.1]
1.7 [0.07]
10.6 [0.42]
0~
4
4
0.
5
2
R
1
11.0 0.2
[0.43 0.008]
7
8.0 [0.31]
3.04
[0.12]
10
1.0 [0.04]
S SEATING PLANE
0.3
[0.01]
6.7 [0.26]
2.54 [0.10]
( Magnification of A )
0.60 [0.02]
7.0 0.5
[0.28 0.02]
0.3
[0.01]
6.7 [0.26]
2.54 [0.10]
1.0 [0.04]
S SEATING PLANE
1.5 0.1
[0.06 0.004]
5.5
[0.22]
5.5
[0.22]
1.5 0.1
[0.06 0.004]
0.15 S
►All dimensions in mm (inches)
►Tolerance: X.X±0.25 (X.XX±0.01)
X.XX±0.13 ( X.XXX±0.005)
►Pins ±0.05 (±0.002)
Pin Connections
Physical Characteristics
Pin
Single Output
Dual Output
Case Size (Single Output)
:
13.7x8.0x6.7mm (0.54x0.31x0.26 Inches)
1
-Vin
-Vin
Case Size (Dual Output)
:
16.24x8.0x6.7mm (0.64x0.31x0.26 Inches)
2
+Vin
+Vin
3
No Pin
No Pin
Case Material
:
Non-Conductive Black Plastic (flammability to UL 94V-0 rated)
4
-Vout
Common
5
+Vout
-Vout
Weight (Single Output)
:
1.7g
6
No Pin
No Pin
Weight (Dual Output)
:
2.0g
7
No Pin
+Vout
8
NA
No Pin
9
---
No Pin
10
---
NA
NA : Not Available for Electrical Connection
In
Total Power International,
Inc
Toll Free: 877-646-0900
www.total-power.com
MSLU100 SERIES
Tota
Total Power International, Inc.
DC/DC CONVERTER 1W, SMD-Package
Test Configurations
Input Reflected-Ripple Current Test Setup
Input reflected-ripple current is measured with a inductor Lin (4.7uH) and Cin (220uF, ESR < 1.0Ω at 100 KHz) to simulate source impedance. Capacitor Cin, offsets
possible battery impedance.
Current ripple is measured at the input terminals of the module, measurement bandwidth is 0-500 KHz.
To Oscilloscope
+
+
Battery
+Vin
Lin
Current
Probe
Cin
+Out
DC / DC
Converter
-Vin
Load
-Out
Peak-to-Peak Output Noise Measurement Test
Use a Cout 0.33uF ceramic capacitor. Scope measurement should be made by using a BNC socket, measurement bandwidth is 0-20 MHz. Position the load between
50 mm and 75 mm from the DC/DC Converter.
+Vin
+Out
Copper Strip
Single Output
DC / DC
Converter
-Vin
Cout
-Out
Scope
Resistive
Load
Copper Strip
+Vin
+Out
Copper Strip
Dual Output
DC / DC
Converter
Com.
Copper Strip
-Vin
-Out
Scope
Cout
Cout
Resistive
Load
Scope
Copper Strip
Design & Feature Considerations
Maximum Capacitive Load
The MSLU100 series has limitation of maximum connected capacitance at the output. The power module may be operated in current limiting mode during start-up,
affecting the ramp-up and the startup time. For optimum performance we recommend 33uF maximum capacitive load. The maximum capacitance can be found in the
data sheet.
Input Source Impedance
The power module should be connected to a low ac-impedance input source. Highly inductive source impedances can affect the stability of the power module.
In applications where power is supplied over long lines and output loading is high, it may be necessary to use a capacitor at the input to ensure startup.
Capacitor mounted close to the power module helps ensure stability of the unit, it is recommended to use a good quality low Equivalent Series Resistance (ESR <
1.0Ω at 100 KHz) capacitor of a 2.2uF for the 5V input devices, a 1.0uF for the 12V input devices and a 0.47uF for the 24V input devices.
+
DC Power
Source
+Vin
+
+Out
DC / DC
Converter
Load
Cin
-
-Vin
-Out
Output Ripple Reduction
A good quality low ESR capacitor placed as close as practicable across the load will give the best ripple and noise performance. To reduce output ripple, it is
recommended to use 3.3uF capacitors at the output.
+
+Vin
DC Power
Source
-
+Out
Single Output
DC / DC
Converter
-Vin
+
Cout
Load
-Out
+Vin
DC Power
Source
-
+Out
Dual Output
Com.
DC / DC
Converter
-Vin
-Out
Cout
Load
Load
Cout
Thermal Considerations
Many conditions affect the thermal performance of the power module, such as orientation, airflow over the module and board spacing. To avoid exceeding the
maximum temperature rating of the components inside the power module, the case temperature must be kept below 90℃. The derating curves are determined from
measurements obtained in a test setup.
Position of air velocity
probe and thermocouple
50mm / 2in
15mm / 0.6in
In
Total Power International,
Inc
Air Flow
DUT
Toll Free: 877-646-0900
www.total-power.com
Similar pages