MJD112 (NPN), MJD117 (PNP) Complementary Darlington Power Transistors DPAK For Surface Mount Applications Designed for general purpose power and switching such as output or driver stages in applications such as switching regulators, converters, and power amplifiers. Features • Lead Formed for Surface Mount Applications in Plastic Sleeves • • • • (No Suffix) Straight Lead Version in Plastic Sleeves (“−1” Suffix) Electrically Similar to Popular TIP31 and TIP32 Series NJV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable These Devices are Pb−Free and are RoHS Compliant* http://onsemi.com SILICON POWER TRANSISTORS 2 AMPERES 100 VOLTS, 20 WATTS DPAK CASE 369C DPAK−3 CASE 369D MARKING DIAGRAMS AYWW J11xG DPAK A Y WW x G YWW J11xG DPAK−3 = Assembly Location = Year = Work Week = 2 or 7 = Pb−Free Package ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 8 of this data sheet. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2013 November, 2013 − Rev. 13 1 Publication Order Number: MJD112/D MJD112 (NPN), MJD117 (PNP) MAXIMUM RATINGS Rating Symbol Max Unit VCEO 100 Vdc Collector−Base Voltage VCB 100 Vdc Emitter−Base Voltage VEB 5 Vdc Collector−Emitter Voltage Collector Current Continuous Peak IC Base Current IB Total Power Dissipation @ TC = 25°C Derate above 25°C PD Total Power Dissipation (Note1) @ TA = 25°C Derate above 25°C PD Operating and Storage Junction Temperature Range TJ, Tstg 2 4 50 20 0.16 1.75 0.014 −65 to +150 Adc mAdc W W/°C W W/°C °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Thermal Resistance, Junction−to−Case RqJC 6.25 °C/W Thermal Resistance, Junction−to−Ambient (Note 1) RqJA 71.4 °C/W 1. These ratings are applicable when surface mounted on the minimum pad sizes recommended. http://onsemi.com 2 MJD112 (NPN), MJD117 (PNP) ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ ELECTRICAL CHARACTERISTICS (TC = 25_C unless otherwise noted) Characteristic Symbol Min Max 100 − − 20 − 20 − 2 − 10 − 2 500 1000 200 − 12,000 − − − 2 3 − 4 − 2.8 25 − Unit OFF CHARACTERISTICS Collector−Emitter Sustaining Voltage (Note 2) (IC = 30 mAdc, IB = 0) VCEO(sus) Collector Cutoff Current (VCE = 50 Vdc, IB = 0) ICEO Collector Cutoff Current (VCB = 100 Vdc, IE = 0) ICBO Emitter Cutoff Current (VBE = 5 Vdc, IC = 0) IEBO Collector−Cutoff Current (VCB = 80 Vdc, IE = 0) ICBO Emitter−Cutoff Current (VBE = 5 Vdc, IC = 0) IEBO Vdc mAdc mAdc mAdc mAdc mAdc ON CHARACTERISTICS DC Current Gain (IC = 0.5 Adc, VCE = 3 Vdc) (IC = 2 Adc, VCE = 3 Vdc) (IC = 4 Adc, VCE = 3 Vdc) hFE Collector−Emitter Saturation Voltage (IC = 2 Adc, IB = 8 mAdc) (IC = 4 Adc, IB = 40 mAdc) VCE(sat) Base−Emitter Saturation Voltage (IC = 4 Adc, IB = 40 mAdc) VBE(sat) Base−Emitter On Voltage (IC = 2 Adc, VCE = 3 Vdc) VBE(on) − Vdc Vdc Vdc DYNAMIC CHARACTERISTICS Current−Gain − Bandwidth Product (IC = 0.75 Adc, VCE = 10 Vdc, f = 1 MHz) fT Output Capacitance (VCB = 10 Vdc, IE = 0, f = 0.1 Mhz) MJD117, NJVMJD117T4G MJD112, NJVMJD112G, NJVMJD112T4G Cob pF − − 2. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2%. *These ratings are applicable when surface mounted on the minimum pad sizes recommended. http://onsemi.com 3 MHz 200 100 MJD112 (NPN), MJD117 (PNP) RB & RC VARIED TO OBTAIN DESIRED CURRENT LEVELS D1, MUST BE FAST RECOVERY TYPE, e.g.: 1N5825 USED ABOVE IB ≈ 100 mA MSD6100 USED BELOW IB ≈ 100 mA ≈8k D1 ≈ 60 FOR td AND tr, D1 IS DISCONNECTED AND V2 = 0 tr, tf ≤ 10 ns DUTY CYCLE = 1% tf 1 0.8 tr 0.6 0.4 +4V 25 ms 0.2 0.04 0.06 FOR NPN TEST CIRCUIT REVERSE ALL POLARITIES. 0.1 r(t), EFFECTIVE TRANSIENT THERMAL RESISTANCE (NORMALIZED) 0.2 0.2 0.1 0.03 0.4 0.6 0.2 1 IC, COLLECTOR CURRENT (AMP) 2 4 Figure 2. Switching Times D = 0.5 0.3 0.1 0.07 0.05 td @ VBE(off) = 0 V PNP NPN Figure 1. Switching Times Test Circuit 1 0.7 0.5 IB1 = IB2 TJ = 25°C 2 t, TIME (s) μ RB 51 VCC = 30 V IC/IB = 250 ts RC SCOPE TUT V2 APPROX +8 V 0 V1 APPROX -12 V 4 VCC -30 V RqJC(t) = r(t) RqJC RqJC = 6.25°C/W D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) - TC = P(pk) qJC(t) 0.05 0.01 SINGLE PULSE P(pk) t1 t2 DUTY CYCLE, D = t1/t2 0.02 0.01 0.01 0.02 0.03 0.05 0.1 0.2 0.3 0.5 1 2 3 5 10 t, TIME OR PULSE WIDTH (ms) Figure 3. Thermal Response http://onsemi.com 4 20 30 50 100 200 300 500 1000 MJD112 (NPN), MJD117 (PNP) TA TC 2.5 25 10 7 5 3 2 100ms PD, POWER DISSIPATION (WATTS) IC, COLLECTOR CURRENT (AMP) ACTIVE−REGION SAFE−OPERATING AREA 500ms 1 0.7 0.5 0.3 0.2 5ms 1ms dc BONDING WIRE LIMITED THERMAL LIMIT SECOND BREAKDOWN LIMIT 0.1 TJ = 150°C CURVES APPLY BELOW RATED VCEO 2 3 5 7 10 20 30 50 70 100 200 2 20 1.5 15 TA SURFACE MOUNT 1 10 0.5 5 0 0 25 50 75 100 T, TEMPERATURE (°C) VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) Figure 4. Maximum Rated Forward Biased Safe Operating Area TC 125 15 Figure 5. Power Derating There are two limitations on the power handling ability of a transistor: average junction temperature and second breakdown. Safe operating area curves indicate IC − VCE limits of the transistor that must be observed for reliable operation; i.e., the transistor must not be subjected to greater dissipation than the curves indicate. The data of Figures 5 and 6 is based on TJ(pk) = 150_C; TC is variable depending on conditions. Second breakdown pulse limits are valid for duty cycles to 10% provided TJ(pk) < 150_C. TJ(pk) may be calculated from the data in Figure 4. At high case temperatures, thermal limitations will reduce the power that can be handled to values less than the limitations imposed by second breakdown. 200 C, CAPACITANCE (pF) TC = 25°C 100 70 50 Cob 30 Cib 20 PNP NPN 10 0.04 0.06 0.1 0.2 0.4 0.6 1 2 4 6 VR, REVERSE VOLTAGE (VOLTS) Figure 6. Capacitance http://onsemi.com 5 10 20 40 MJD112 (NPN), MJD117 (PNP) TYPICAL ELECTRICAL CHARACTERISTICS NPN MJD112 PNP MJD117 6k 6k VCE = 3 V 4k 4k 3k 3k 2k hFE , DC CURRENT GAIN hFE , DC CURRENT GAIN TJ = 125°C 25°C 1k 800 -55°C 600 400 300 0.04 0.06 0.1 0.4 0.6 1 0.2 IC, COLLECTOR CURRENT (AMP) 2 25°C 2k 1k 800 -55°C 600 400 300 0.04 0.06 4 VCE = 3 V TC = 125°C 0.1 0.2 0.4 0.6 1 IC, COLLECTOR CURRENT (AMP) 2 4 3.4 VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) Figure 7. DC Current Gain TJ = 125°C 3 IC = 0.5 A 2.6 1A 2A 4A 2.2 1.8 1.4 1 0.6 0.1 0.2 0.5 1 2 5 10 20 50 100 3.4 TJ = 125°C 3 2.6 IC = 0.5 A 1A 2A 4A 2.2 1.8 1.4 1 0.6 0.1 0.2 0.5 IB, BASE CURRENT (mA) 1 2 5 10 20 50 100 IB, BASE CURRENT (mA) Figure 8. Collector Saturation Region 2.2 2.2 TJ = 25°C TJ = 25°C 1.4 1.8 VBE(sat) @ IC/IB = 250 V, VOLTAGE (VOLTS) V, VOLTAGE (VOLTS) 1.8 VBE @ VCE = 3 V 1 VCE(sat) @ IC/IB = 250 0.6 0.2 0.04 0.06 1.4 VBE(sat) @ IC/IB = 250 VBE @ VCE = 3 V 1 VCE(sat) @ IC/IB = 250 0.6 0.1 0.2 0.4 0.6 1 2 0.2 0.04 0.06 4 IC, COLLECTOR CURRENT (AMP) 0.1 0.2 0.4 0.6 1 IC, COLLECTOR CURRENT (AMP) Figure 9. “On Voltages http://onsemi.com 6 2 4 MJD112 (NPN), MJD117 (PNP) PNP MJD117 +0.8 0 θV, TEMPERATURE COEFFICIENTS (mV/°C) θV, TEMPERATURE COEFFICIENTS (mV/°C) NPN MJD112 *APPLIED FOR IC/IB < hFE/3 -0.8 25°C TO 150°C -1.6 -2.4 *qVC FOR VCE(sat) -55°C TO 25°C -3.2 -4 25°C TO 150°C qVC FOR VBE -4.8 0.04 0.06 0.1 -55°C TO 25°C 0.4 0.6 1 0.2 IC, COLLECTOR CURRENT (AMP) 2 +0.8 0 *APPLIES FOR IC/IB < hFE/3 25°C TO 150°C -0.8 -1.6 *qVC FOR VCE(sat) -55°C TO 25°C -2.4 25°C TO 150°C -3.2 -4 -4.8 0.04 0.06 4 -55°C TO 25°C qVB FOR VBE 0.1 0.2 0.4 0.6 1 IC, COLLECTOR CURRENT (AMP) 2 4 Figure 10. Temperature Coefficients 105 104 103 REVERSE FORWARD IC, COLLECTOR CURRENT (A) μ IC, COLLECTOR CURRENT (A) μ 105 VCE = 30 V 102 TJ = 150°C 101 100 100°C 25°C 10-1 -0.6 -0.4 -0.2 0 +0.2 +0.4 +0.6 +0.8 +1 VBE, BASE-EMITTER VOLTAGE (VOLTS) +1.2 +1.4 104 103 REVERSE FORWARD VCE = 30 V 102 101 TJ = 150°C 100°C 100 25°C 10-1 +0.6 +0.4 +0.2 0 -0.2 -0.4 -0.6 -0.8 -1 VBE, BASE-EMITTER VOLTAGE (VOLTS) Figure 11. Collector Cut−Off Region COLLECTOR PNP COLLECTOR NPN BASE BASE ≈8k ≈ 120 ≈8k EMITTER ≈ 120 EMITTER Figure 12. Darlington Schematic http://onsemi.com 7 -1.2 -1.4 MJD112 (NPN), MJD117 (PNP) ORDERING INFORMATION Package Type Package Shipping† MJD112G DPAK (Pb−Free) 369C 75 Units / Rail NJVMJD112G* DPAK (Pb−Free) 369C 75 Units / Rail MJD112−1G DPAK−3 (Pb−Free) 369D 75 Units / Rail MJD112RLG DPAK (Pb−Free) 369C 1,800 Tape & Reel MJD112T4G DPAK (Pb−Free) 369C 2,500 Tape & Reel NJVMJD112T4G* DPAK (Pb−Free) 369C 2,500 Tape & Reel MJD117G DPAK (Pb−Free) 369C 75 Units / Rail MJD117−1G DPAK−3 (Pb−Free) 369D 75 Units / Rail MJD117RLG DPAK (Pb−Free) 369C 1,800 Tape & Reel MJD117T4G DPAK (Pb−Free) 369C 2,500 Tape & Reel NJVMJD117T4G* DPAK (Pb−Free) 369C 2,500 Tape & Reel Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *NJV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable. http://onsemi.com 8 MJD112 (NPN), MJD117 (PNP) PACKAGE DIMENSIONS DPAK CASE 369C ISSUE D A E b3 c2 B Z D 1 L4 A 4 L3 b2 e 2 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. THERMAL PAD CONTOUR OPTIONAL WITHIN DIMENSIONS b3, L3 and Z. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT EXCEED 0.006 INCHES PER SIDE. 5. DIMENSIONS D AND E ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY. 6. DATUMS A AND B ARE DETERMINED AT DATUM PLANE H. C H DETAIL A 3 c b 0.005 (0.13) M H C L2 GAUGE PLANE C L SEATING PLANE A1 L1 DETAIL A ROTATED 905 CW INCHES MIN MAX 0.086 0.094 0.000 0.005 0.025 0.035 0.030 0.045 0.180 0.215 0.018 0.024 0.018 0.024 0.235 0.245 0.250 0.265 0.090 BSC 0.370 0.410 0.055 0.070 0.108 REF 0.020 BSC 0.035 0.050 −−− 0.040 0.155 −−− STYLE 1: PIN 1. BASE 2. COLLECTOR 3. EMITTER 4. COLLECTOR SOLDERING FOOTPRINT* 6.20 0.244 DIM A A1 b b2 b3 c c2 D E e H L L1 L2 L3 L4 Z 3.0 0.118 2.58 0.101 5.80 0.228 1.6 0.063 6.172 0.243 SCALE 3:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 9 MILLIMETERS MIN MAX 2.18 2.38 0.00 0.13 0.63 0.89 0.76 1.14 4.57 5.46 0.46 0.61 0.46 0.61 5.97 6.22 6.35 6.73 2.29 BSC 9.40 10.41 1.40 1.78 2.74 REF 0.51 BSC 0.89 1.27 −−− 1.01 3.93 −−− MJD112 (NPN), MJD117 (PNP) PACKAGE DIMENSIONS IPAK CASE 369D ISSUE C C B V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. E R 4 A S 1 2 DIM A B C D E F G H J K R S V Z Z 3 −T− SEATING PLANE K J F D G H 3 PL 0.13 (0.005) M INCHES MIN MAX 0.235 0.245 0.250 0.265 0.086 0.094 0.027 0.035 0.018 0.023 0.037 0.045 0.090 BSC 0.034 0.040 0.018 0.023 0.350 0.380 0.180 0.215 0.025 0.040 0.035 0.050 0.155 −−− MILLIMETERS MIN MAX 5.97 6.35 6.35 6.73 2.19 2.38 0.69 0.88 0.46 0.58 0.94 1.14 2.29 BSC 0.87 1.01 0.46 0.58 8.89 9.65 4.45 5.45 0.63 1.01 0.89 1.27 3.93 −−− STYLE 1: PIN 1. BASE 2. COLLECTOR 3. EMITTER 4. COLLECTOR T ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 http://onsemi.com 10 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MJD112/D