Purdy AND-TFT-35VX-KIT Lcd color monitor Datasheet

AND-TFT-35VX-KIT
3.5" TFT LCD
LCD Color Monitor
The AND-TFT-35VX-KIT is a compact full color TFT LCD
module, that is suitable for security, video games, door
phones, video phones, portable TV and instrument displays
and other media applications which require a high quality flat
panel display. This device consists of an amorphous silicon
TFT LCD panel with LED B/L that has 640 x 480 pixels on a
3.5 inch diagonal screen.
Product specifications contained herein may be changed
without prior notice. It is therefore advisable to contact Purdy
Electronics before proceeding with the design of equipment
incorporating this product.
Features
•
•
•
•
•
•
•
Amorphous silicon TFT LCD panel with LED B/L
Module with resistive type touch panel
Pixel in stripe configuration
High Resolution: 262,144 Dots (640 x 480)
Optimum viewing direction: 6 o’clock
Auto-detect input signal when power on
Input Signal: D-Sub VGA Signal, Dual Composite Video
Channals and S-Video
• Operating Temperature: 0ºC ~ 60ºC
• Storage Temperature: -20ºC ~ 80ºC
• RoHS Compliant
Mechanical Characteristics
Specification
Item
Unit
Screen Size
3.5 inch diagonal
inch
Display Format
640 x (R, G, B) x 480
dot
Display Colors
262,144
–
Active Area
72 (W) x 52.56 (H)
mm
Pixel Pitch
0.1125 (W) x 0.1095 (H)
mm
Pixel Configuration
Stripe
–
Outline Dimension
84.25 (W) x 65.40 (H) x 4.45 (D) (Typ.)
mm
Weight
Part List
• AND-TFT-35VX
• PC-TFT-35VX
• 6 Button OSD board with cable
• User interface board with cable
52 ± 5
g
Surface Treatment
AG
–
Surface Treatment of
Touch Panel
3H
–
Absolute Maximum Rating VSS1 = VSS2 = GND = )V, Ta=25ºC
Symbol
Remark
Item
Min.
Max.
Unit
VDD1
–
-0.3
2
V
VCC
–
-0.3
5
V
VDD2
–
-0.5
12.0
V
VGG
–
-0.3
40.0
V
VGG -VEE
–
–
40.0
V
VEE
–
-20
0.3
V
Storage Temperature
TST
–
-20
+80
°C
Operation Temperature
TOP
Note 1
0
+60
°C
Supply Voltage
Note 1: Operating Temperature defines that contrast, response time, other display optical character are Ta=+25.
3/22/08
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
1
AND-TFT-35VX-KIT
Power Consumption
Item
Symbol
Conditions
Specifications
Typ.
Max.
IGG
VGG =+17V
0.12
0.15
mA
0.15
0.19
mA
Supply Current for Gate Driver (Hi level)
Units
Supply Current for Gate Drive (Low level)
IEE
VEE =-10V
Supply Current for Source Driver (Digital)
IDD1
VDD1=+3.3V
4.8
8.0
mA
Supplly Current for Source Driver (Analog)
IDD2
VDD2 =+10V
16.0
30.0
mA
Supply Current for Gate Driver (Digital)
ICC
VCC =+3.3V
0.17
0.21
mA
–
PLED
–
180
332
mW
–
384
456
mW
–
–
564
788
mW
LCD Panel Power Consumption
Backlight Power Consumption
Total Power Consumption
Recommended Operating Conditions (VSS1 = VSS2 = GND = 0V, Ta = 25°C)
Item
Supply Voltage for Source Driver
Supply Voltage for Gate Driver
Digital Input Voltage
Min.
Specifications
Typ.
Max.
VDD1
3.0
3.3
3.6
V
VDD2
9.5
10
10.5
V
VGG
–
V
Symbol
Unit
–
+17
VEE
–
-10
–
V
VCC
3.0
3.3
3.6
V
VIH
0.8 VDD1
–
VDD1
V
VIL
0
–
0.2 VDD1
V
Recommended Driving Conditions for LED Backlight (GND= 0V, Ta=25ºC)
Item
Supply Voltage of LED Backlight
Supply Current of LED Backlight
Backlight Power Consumption
Symbol
VLED
ILED1
ILED2
PLED
Min.
Typ.
Max.
Unit
Remarks
9
9.6
11.4
V
IL = 20MA
–
20
–
mA
Note 1
360
384
456
mW
Note 2
Note 1: LED B/L applied information, please refer to the appendix at the end.
Note 2: PLED = VLED * ILED1 + VLED * ILED2.
2
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
3/22/08
AND-TFT-35VX-KIT
Optical Specifications (Ta=25ºC)
Item
Specifications
Typ.
Max.
± 50
–
15
–
35
–
Symbol
Conditions
θ
θ (to 12 o’clock)
θ (to 6 o’clock)
CR>10
CR
–
200
400
–
–
Tr
Tf
θ =0°
–
–
15
25
30
50
ms
Brightness
LUM
θ =0°
180
210
–
Uniformity
Cross Talk
U
–
X
θ =0°
θ =0°
70
–
0.28
75
–
0.31
–
3
0.34
0.30
0.33
0.36
–
10,000
–
Horizontal
Viewing Angle
Vertical
Min.
± 45
10
30
Unit
deg
Contrast Ratio
Luminance when LCD is White
Luminance when LCD is Black
Rise
Fall
Response Time
White Chromaticity
Lamp Life Time
–
Y
Ta=25°C
–
–
cd/m2
%
%
–
hrs
Electronic Characteristics
Symbol
I/O
V in
I in
P in
I
Conditions
DC(+)
Min.
4.8
400
DC(+5V)
Typ.
5
450
2.25
Max.
5.2
500
Unit
V
mA
W
Touch Panel Characteristics - Electrical Performance
Item
Terminal Resistance
Input Voltage
Linearity (X, Y direction)
Insulation Impedance
Response Time
Operation Force
Note 1: Input through 0.8R stylus or finger.
3/22/08
Symbol
X
Min.
120
Typ.
240
Max.
370
Y
VT
280
–
20
20
570
5.0
860
7.0
±1.5
5
35
Unit
Ω
Ω
V
%
ΜΩ
ms
g
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
Remark
DC25V
Note 1
3
AND-TFT-35VX-KIT
Touch Panel Characteristics - Durability Performance
Hitting Durability
At least 1,000,000 times with 48.0mm silicon rubber, 200g, 3 times/second.
Sliding Durability
At least 1,000,000 times with r0.8mm polyacetal stylus, 200g, 60mm/second.
Pixel Arrangement - The LCD module pixel arrangement is stripe.
Driver Board Outline Drawing
Description:
Outline: 83.75 x 62 x 7.2 mm
Top Layer High (Max): 6 mm
Board thickness: 1.2 mm
Three Screw Holes: Φ 2.5 mm
4
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
3/22/08
AND-TFT-35VX-KIT
Keyboard Outline Drawing (Optional)
Description:
Outline: 87.2 x 14 x 12.7 mm
Top Layer High (Max): 8 mm
Bottom Layer High (Max): 3.5 mm
Board thickness: 1.2 mm
Four Screw Holes: Φ 2.5 mm
Demo Kit Outline Drawing (Optional)
Description:
Outline: 83.75 x 25 x 19.7 mm
Top Layer High (Max): 15 mm
Bottom Layer High (Max): 3.5 mm
Board thickness: 1.2 mm
Four Screw Holes: Φ 2.5 mm
3/22/08
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
5
AND-TFT-35VX-KIT
Input/Output Terminals
J12
Output to Panel Signal Terminal (50FPC)
J4
Outside Signal Input Terminal (14 pin)
J5
Control Signal Input Terminal (10 pin)
J3
Video 2 Input Terminal (2 pin) (Optional)
Outside Signal Input Terminal
J4
Connector: Molex 53261-1471 or Compatible
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
J5
Pin No.
1
2
3
4
5
6
7
8
9
10
J5
Pin No.
1
2
6
Pin Name
GND
VSYNC
HSYNC
GND
B
G
R
GND
S-C
S-Y
VIDEO1
GND
GND
VCC
I/O
I
I
I
I
I
I
I
I
I
I
I
I
I
I
Pni Description
Ground
VSYNC input for RGB input
HSYNC input for RGB input
Ground
Video BLUE input
Video GREEN input
Video RED input
Ground
S-video Chroma input
S-video luma input
Composite Video 1
Ground
Ground
5V
Remarks
–
–
–
–
–
–
–
–
–
–
–
–
–
4.8V – 5.2V
Control SIgnal Input/Output Terminal
Connector: Molex 53261-1071 or Compatibility
Pin Name
I/O
LED
O
Red Lamp
LED
O
Green Lamp
SENSOR
I
Remote Sensor
GND
I
Ground
3.3V
O
+3.3V
ON/OFF
I
Power On/Off
MENU
I
Menu
DOWN
I
Down
UP
I
Up
ENTER
I
Enter
Control SIgnal Input/Output Terminal
Connector: Molex 53261-1071 or Compatibility
Pin Name
GND
VIDEO2
I/O
I
I
Ground
Composite Video 2
Pin Description
Remarks
–
–
–
–
–
–
–
–
–
–
Pin Description
Remarks
–
–
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
3/22/08
AND-TFT-35VX-KIT
Dimensional Outline
3/22/08
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
7
AND-TFT-35VX-KIT
Timing Parameters - AC Electrical Characteristics (VCC=VDD1=3.3V, VDD2 = 10V, GND = VSS1 = VSS2 = 0V, Ta=25ºC)
8
Item
Symbol
Min.
Typ.
Max.
Unit
CLK Frequency
FCLK
–
25
40
MHz
CLK Pulse Width
TCPH
25
–
–
ns
Data Set-up Time
TSU
4
–
–
ns
Data Hold Time
THD
2
–
–
ns
Propagation Delay of DIO2/1
TPHL
6
10
15
ns
Time That The Last Data to LD
TLD
1
–
–
TCPH
Pulse Width of LD
TWLD
2
–
–
TCPH
Time That LD to DIO1/2
TLDS
5
–
–
TCPH
POL Set-up Time
TPSU
6
–
–
ns
POL Hold Time
TPHD
6
–
–
ns
OE Pulse Width
TOEV
1
–
–
µs
CKV Pulse Width
TCKV
500
–
–
ns
STV Set-up Time
TSUV
400
–
–
ns
STV Hold Time
THDV
400
–
–
ns
Horizontal Display Period
THDP
–
640
–
TCPH
Horizontal Period Timing Range
THP
–
800
–
TCPH
Horizontal Lines Per Field
TV
520
525
640
THP
Vertical Display Timing Range
TDV
–
480
–
THP
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
3/22/08
AND-TFT-35VX-KIT
Interface Board
Features
• Used for TFT-LCD Display: 3.5” AND-TFT-35VX
• Auto-detect input signal when power on
• Input Signal: D-Sub VGA Signal, Dual Composite
Video Channals and S-Video
The PC-TFT-35VX interface board is designed to
work with the AND-TFT-35VX color TFT 3.5”
display and together is suitable for security, video
games, door phone, video phone, portable TV,
and instrument display applications.
• Operating Temperature: 0ºC ~ 60ºC
• Storage Temperature: -20ºC ~ 80ºC
• RoHS Compliant
Electronic Characteristics
Symbol
V in
I in
P in
I/O
I
Conditions
DC(+)
DC(+5V)
Min.
4.8
400
Typ.
5
450
2.25
Max.
5.2
500
Unit
V
mA
W
Driver Board Outline Drawing
Description:
Outline: 83.75 x 62 x 7.2 mm
Top Layer High (Max): 6 mm
Board thickness: 1.2 mm
Three Screw Holes: Φ 2.5 mm
3/22/08
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
9
AND-TFT-35VX-KIT
Input/Output Terminals
J12
Output to Panel Signal Terminal (50FPC)
J4
Outside Signal Input Terminal (14 pin), Connector: Molex 53261-1471
J3
Video2 Input Terminal (2 pin) optional
J5
Control Signal Input Terminal (10 pin), Molex 53261-1071
Pin No.
Pin Name
I/O
Pni Description
1
GND
I
Ground
2
VSYNC
I
VSYNC input for RGB input
3
HSYNC
I
HSYNC input for RGB input
4
GND
I
Ground
5
B
I
Video BLUE input
6
G
I
Video GREEN input
7
R
I
Video RED input
8
GND
I
Ground
9
S-C
I
S-video Chroma input
10
S-Y
I
S-video luma input
11
VIDEO1
I
Composite Video 1
12
GND
I
Ground
13
GND
I
Ground
VCC
I
5V
14
J5
Pin No.
1
2
3
4
5
6
7
8
9
10
J3
Pin No.
1
2
10
Remarks
–
–
–
–
–
–
–
–
–
–
–
–
–
4.8V – 5.2V
Control SIgnal Input/Output Terminal
Connector: Molex 53261-1071 or Compatibility
Pin Name
I/O
LED
O
Red Lamp
LED
O
Green Lamp
SENSOR
I
Remote Sensor
GND
I
Ground
3.3V
O
+3.3V
ON/OFF
I
Power On/Off
MENU
I
Menu
DOWN
I
Down
UP
I
Up
ENTER
I
Enter
VIDEO2 Input Terminal (Optional)
Connector: Molex 53261-0271 or compatible
Pin Name
GND
VIDEO2
I/O
I
I
Ground
Composite Video2
Pin Description
Remarks
–
–
–
–
–
–
–
–
–
–
Pin Description
Remarks
–
–
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
3/22/08
AND-TFT-35VX-KIT
Keyboard Outline Drawing (Optional)
Description:
Outline: 87.2 x 14 x 12.7 mm
Top Layer High (Max): 8 mm
Bottom Layer High (Max): 3.5 mm
Board thickness: 1.2 mm
Four Screw Holes: Φ 2.5 mm
I/O Outline Drawing (Optional)
Description:
Outline: 83.75 x 25 x 19.7 mm
Top Layer High (Max): 15 mm
Bottom Layer High (Max): 3.5 mm
Board thickness: 1.2 mm
Four Screw Holes: Φ 2.5 mm
3/22/08
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
11
AND-TFT-35VX-KIT
Item List: Driver Board & Cable for Demo Kit
14 Wire
10 Wire
Keyboard
Location
Function
Power
Name
SW1
On/Off
Lamp
LED
Indicator
Sensor
IC1
Optional
Enter
SW2
Select
Down
SW3
Decrement
Up
SW4
Increment
Menu
SW5
Brightness, Contrast, Color, Tint, Sharpness
12
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
3/22/08
AND-TFT-35VX-KIT
Item List: Driver Board & Cable for Demo Kit
I/O Board
I/O Board
3/22/08
Connector
Description
Power (J6)
(- + +5V center pin
AV (J7)
RCA jack (signal center pin)
S-Video (J8)
Optional
VGA (J2)
DB15 (PC Input)
Interface (J1)
14 wire Interface
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
13
Similar pages