MCL4154 www.vishay.com Vishay Semiconductors Small Signal Fast Switching Diode FEATURES • Silicon epitaxial planar diode • Electrical data identical with the device 1N4154 • MicroMELF package • AEC-Q101 qualified • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS MECHANICAL DATA • Extreme fast switches Case: MicroMELF Weight: approx. 12 mg Cathode band color: black Packaging codes/options: TR3/10K per 13" reel (8 mm tape), 10K/box TR/2.5K per 7" reel (8 mm tape), 12.5K/box PARTS TABLE PART TYPE DIFFERENTIATION ORDERING CODE INTERNAL CONSTRUCTION REMARKS VRRM = 35 V MCL4154-TR3 or MCL4154-TR Single diode Tape and reel MCL4154 ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Repetitive peak reverse voltage Reverse voltage Peak forward surge current tp = 1 μs Repetitive peak forward current Forward continuous current Average forward current VR = 0 Power dissipation SYMBOL VALUE UNIT VRRM 35 V VR 25 V IFSM 2 A IFRM 450 mA IF 200 mA IFAV 150 mA Ptot 500 mW THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER Thermal resistance junction to ambient air Junction temperature Storage temperature range Rev. 1.9, 01-Aug-12 TEST CONDITION SYMBOL VALUE UNIT Mounted on epoxy-glass hard tissue, Fig. 4, 35 μm copper clad, 0.9 mm2 copper area per electrode RthJA 500 K/W Tj 175 °C Tstg - 65 to + 175 °C Document Number: 85568 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MCL4154 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MAX. UNIT IF = 30 mA VF 1000 mV VR = 25 V IR 100 nA VR = 25 V, Tj = 150 °C IR 100 μA Breakdown voltage IR = 5 μA, tp/T = 0.01, tp = 0.3 ms V(BR) Diode capacitance VR = 0 V, f = 1 MHz, VHF = 50 mV CD Forward voltage Reverse current IF = IR = 10 mA, iR = 1 mA Reverse recovery time IF = 10 mA, VR = 6 V, iR = 0.1 x IR, RL = 100 MIN. TYP. 35 V 4 pF 4 ns trr 2 TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 3.0 100 C D - Diode Capacitance (pF) I R - Reverse Current (µA) Scattering Limit 10 1 0.1 VR = 25 V 0.01 0 40 80 120 160 f = 1 MHz Tj = 25 °C 2.0 1.5 1.0 0.5 0 200 Tj - Junction Temperature (°C) 94 9154 2.5 0.1 Fig. 1 - Reverse Current vs. Junction Temperature 1 100 10 V R - Reverse Voltage (V) 94 9156 Fig. 3 - Diode Capacitance vs. Reverse Voltage 1000 1.3 1.27 Tj = 100 °C 100 10 9.9 0.152 0.355 25 Tj = 25 °C 1 10 I F - Forward Current (mA) 0.71 0.1 2.5 0 94 9152 0.4 0.8 1.2 1.6 2.0 V F - Forward Voltage (V) Fig. 2 - Forward Current vs. Forward Voltage Rev. 1.9, 01-Aug-12 95 10329 24 Fig. 4 - Board for RthJA definition (in mm) Document Number: 85568 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MCL4154 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): MicroMELF 0.6 (0.024) * 1.1 (0.043) 1.2 (0.047) < 1. 3 surface plan gl 1 (0.039) 5 ( as 0.0 s 53 ) surface plan Cathode indification 0.25 (0.010) 0.15 (0.006) > R2.5 (0.098) glass 2 (0.079) 1.8 (0.071) * The gap between plug and glass can be either on cathode or anode side Foot print recommendation: Wave soldering 2.4 (0.094) 2.8 (0.110) 0.8 (0.031) 0.9 (0.035) 0.9 (0.035) 1.4 (0.055) 1.2 (0.047) 0.8 (0.031) Reflow soldering 0.8 (0.031) 1 (0.039) Created - Date: 26.July.1996 Rev. 13 - Date: 07.June.2006 Document no.:6.560-5007.01-4 96 12072 Rev. 1.9, 01-Aug-12 Document Number: 85568 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000