Document 902-1 Shielded Power Inductors–MSS1210 • 12.3 × 12.3 mm footprint; 10 mm high shielded inductors • 27 inductance values from 10 µH to 10 mH • Low DCR and excellent current handling Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Environment RoHS compliant, halogen free Terminations RoHS compliant matte tin over nickel over phos bronze. Other terminations available at additional cost. Weight: 5.1 – 6.2 g Ambient temperature –40°C to +85°C with (40°C rise) Irms current. Maximum part temperature +125°C (ambient + temp rise). Derating. Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 300/13″ reel; Plastic tape: 24 mm wide, 0.5 mm thick, 20 mm pocket spacing, 10.3 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. Isat (A)5 Irms (A)6 3 SRF Inductance2 DCR (Ohms) typ4 10% 20% 30% 20°C 40°C Part number1 (µH) typ max (MHz) drop drop drop rise rise MSS1210-103ME_ 10 ±20% MSS1210-153ME_ 15 ±20% MSS1210-223ME_ 22 ±20% MSS1210-333ME_ 33 ±20% MSS1210-473ME_ 47 ±20% MSS1210-683ME_ 68 ±20% MSS1210-104KE_ 100 ±10% MSS1210-124KE_ 120 ±10% MSS1210-154KE_ 150 ±10% MSS1210-184KE_ 180 ±10% MSS1210-224KE_ 220 ±10% MSS1210-334KE_ 330 ±10% MSS1210-474KE_ 470 ±10% MSS1210-684KE_ 680 ±10% MSS1210-105KE_ 1000 ±10% MSS1210-125KE_ 1200 ±10% MSS1210-155KE_ 1500 ±10% MSS1210-185KE_ 1800 ±10% MSS1210-225KE_ 2200 ±10% MSS1210-275KE_ 2700 ±10% MSS1210-335KE_ 3300 ±10% MSS1210-395KE_ 3900 ±10% MSS1210-475KE_ 4700 ±10% MSS1210-565KE_ 5600 ±10% MSS1210-685KE_ 6800 ±10% MSS1210-825KE_ 8200 ±10% MSS1210-106KE_ 10000 ±10% 0.014 0.019 0.026 0.033 0.048 0.068 0.106 0.115 0.157 0.173 0.191 0.289 0.434 0.536 0.816 1.07 1.23 1.39 1.82 2.02 2.69 2.98 3.34 3.71 4.97 5.51 7.39 0.016 0.022 0.030 0.039 0.056 0.080 0.125 0.135 0.185 0.203 0.225 0.340 0.510 0.630 0.960 1.26 1.45 1.63 2.14 2.38 3.17 3.50 3.93 4.37 5.85 6.48 8.69 15.0 12.0 9.5 7.5 6.0 4.5 3.6 3.3 2.9 2.8 2.7 1.8 1.6 1.4 1.1 1.0 0.85 0.85 0.70 0.65 0.56 0.54 0.51 0.45 0.40 0.38 0.31 9.6 11.5 8.3 9.9 6.8 8.1 5.4 6.4 4.5 5.4 3.8 4.5 3.1 3.7 2.9 3.4 2.6 3.1 2.3 2.8 2.1 2.5 1.7 2.1 1.4 1.7 1.2 1.4 0.98 1.2 0.91 1.1 0.81 0.96 0.73 0.87 0.66 0.79 0.59 0.71 0.54 0.64 0.50 0.60 0.45 0.54 0.41 0.49 0.38 0.45 0.35 0.41 0.31 0.37 12.5 10.7 8.8 6.9 5.8 4.9 4.0 3.7 3.4 3.0 2.8 2.2 1.8 1.6 1.3 1.2 1.0 0.95 0.86 0.77 0.70 0.64 0.58 0.54 0.49 0.45 0.40 4.70 4.20 3.20 2.90 2.20 2.10 1.80 1.70 1.26 1.20 1.10 0.85 0.70 0.69 0.60 0.49 0.46 0.45 0.38 0.36 0.31 0.30 0.28 0.27 0.22 0.21 0.18 6.50 5.70 4.40 3.80 3.00 2.80 2.40 2.30 1.75 1.70 1.50 1.20 0.98 0.91 0.83 0.67 0.65 0.63 0.52 0.50 0.43 0.41 0.39 0.38 0.31 0.28 0.24 US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] 1. Specify termination and packaging codes: MSS1210-105KED Termination: E = RoHS compliant matte tin over nickel over phos bronze. Special order: Q = RoHS tin-silvercopper (95.5/4/0.5) or P = non-RoHS tin-lead (63/37). Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic tape (300 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent. 3. DCR measured on a micro-ohmmeter and a Coilcraft CCF858 test fixture. 4. SRF measured using Agilent/HP 4191A or equivalent. 5. DC current at 25°C that causes the specified inductance drop from its value without current. Click for temperature derating information. 6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Document 902-1 Revised 07/11/16 © Coilcraft Inc. 2016 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 902-2 Shielded Power Inductors – MSS1210 Typical L vs Current Typical L vs Frequency 10000 10000 3300 µH 3300 µH 1000 µH 330 µH 100 µH 100 33 µH 10 µH 10 1 1000 µH 1000 Inductance (µH) Inductance (µH) 1000 330 µH 100 µH 100 33 µH 10 µH 10 0.1 10 1 100 1 0.1 Current (A) 1 10 100 Frequency (MHz) 0.472 ±0.012 12,0 ±0,3 0.472 ±0.012 12,0 ±0,3 123 Dash number X Internal code Parts manufactured prior to August 2011 may have a different part marking. 0.025 * 0,635 0.394 ±0.008* 10,0 ±0,2 Recommended Land Pattern 0.197 ±0.008 5,0 ±0,2 0.217 5,5 0.276 ±0.016 7,0 ±0,4 0.098 ±0.016 2,5 ±0,4 0.375 9,5 0.118 3,0 * For optional tin-lead and tin-silver-copper terminations, dimensions are for the mounted part. Dimensions before mounting can be an additional 0.012 inch (0,3 mm). Dimensions are in inches mm US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 902-2 Revised 07/11/16 © Coilcraft Inc. 2016 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.