Detector Switches/ESE58 09HL Detector Switches Type: ESE58 ■ Features ■ Recommended Applications ● Thin body: 0.9 mm. ● Circuit type: Normally-open and normally-closed ● Detection of media in portable electronic equipment (Mobile phones/Digital still cameras/DVCs, etc.) types are available. ● Lineup with variations in right-left operations. ■ Explanation of Part Numbers 1 2 3 4 5 E S E 5 8 6 8 9 Design No Product Code 6th L R 7 Type Left-side operation type Right-side operation type ■ Specifications Rating 50 µA 3 Vdc to 10 mA 5 Vdc (Resistive load) Contact Resistance 500 m액 max. (Initial) Insulation Resistance 100 M액 min. (100 Vdc) Dielectric Withstanding Voltage 100 Vac for 1 minute Operating Force 300 mN max. Mounting Height 0.9 mm Poles and Throws 1-pole 1-throw With boss : 1.5 mm (1.5 mm) Without boss : 1.25 mm (1.5 mm) Full Travel (Pushing distance) Operating Life 50000 cycles min. Temperature Range –10 °C to +60 °C Heat Resistance +70 °C for 96 hours Low Temperature Resistance –25 °C for 96 hours Humidity Resistance +40 °C 90 % to 95 % RH for 96 hours Minimum Quantity/Packing Unit 5000 pcs. Embossed Taping (Reel Pack) Quantity/Carton 30000 pcs. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – ES25 – 00 Oct. 2012 Detector Switches/ESE58 ■ Dimensions in mm (not to scale) No. 1 Nomal open type ESE58L11 J-bent terminals 1-pole 1-throw with Boss ESE58L11B without Boss ESE58L11A 0.5 0.2 with Boss ESE58L61B 1.25 1.1 1.75 2.3 On position Operation point (0.75) 0.9±0.1 2.8 4.5 PWB mounting hole for reference (Pitch tolerance: ±0.05) without Boss ESE58L61A 0.2 0.5 PWB mounting hole for reference (Pitch tolerance: ±0.05) φ0.6±0.05 1.6±0.1 Nomal open type ESE58R11 J-bent terminals 1-pole 1-throw 0.6 1.05 0.8 1.55 2.45 0.9±0.1 2.8 4.5 1.35 3.5 0.77 0.39 Off position (0.55) 3.0 1.35 0.4 0.9 0.8 2.8 4.5 2.15±0.2 0.3 0.7 2–φ Off position 0.9±0.1 PWB mounting hole for reference (Pitch tolerance: ±0.05) without Boss ESE58R11A 0.2 φ0.6±0.05 1.6±0.1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – ES26 – 1.25 1.1 2.3±0.2 2.65 0.9±0.1 On position 1.75 R0 .14 Operation point PWB mounting hole for reference (Pitch tolerance: ±0.05) 3.5 Full stroke position 1.25 2.8 4.5 (0.75) 3.0 0.3 0.9±0.1 R 0.77 0.39 5 2.4 0.7 On position 0.48 Pivot center 0.24 (0.64) 0.8 φ0 .7 2– 1.6 2.55±0.2 2.9 2.0 Operation point Full stroke position 1.5 0.25 3.5 On position R0 R 0.77 0.39 5 2.4 (1) On position 0.48 Pivot center 0.24 (0.64) .14 0.5 0.5 0.2 0.4 C0 .1 0.44 Off position 0.24 Pivot center (0.64) .45 Operation point R2 0.6 0.45 2.9 2.6±0.2 2.0 Operation point Full stroke position 1.5 (1) with Boss ESE58R11B 1.6 Full stroke position 1.05 0.5 0.45 0.3 3.0 0.9 0.4 0.4 C0 .1 3.5±0.2 No. 3 0.77 0.39 0.44 Off position 0.24 Pivot center (0.64) .14 .45 R0 .14 R0 R2 0.7 2.65 0.7 3.0 2.0 2.55±0.2 0.8 3.5 0.2 3.0 (0.64) 2.8 4.5 Nomal closed type ESE58L61 J-bent terminals 1-pole 1-throw No. 2 0.77 0.39 0.48 On position 0.24 Pivot center .45 PWB mounting hole for reference (Pitch tolerance: ±0.05) φ0.6±0.05 1.6±0.1 0.4 C0 .1 R2 0.3 0.9±0.1 On position Operation point (1) Full stroke position 1.5 3.0 0.25 3.5 2.9 0.7 (0.64) 1.6 2–φ 0.7 0.77 0.39 0.48 On position 0.24 Pivot center .14 .14 .45 R0 R0 R2 Full stroke position 1.25 0.5 0.2 2.8 4.5 PWB mounting hole for reference (Pitch tolerance: ±0.05) 00 Oct. 2012 Detector Switches/ESE58 ■ Dimensions in mm (not to scale) No. 4 Nomal closed type ESE58R61 J-bent terminals 1-pole 1-throw with Boss ESE58R61B without Boss ESE58R61A 0.4 C0 .1 0.6 1.05 Full stroke position 1.05 Operation point 1.55 Off position 2.15±0.2 2.45 0.6 0.45 0.4 (0.55) 2.8 4.5 3.5 PWB mounting hole for reference (Pitch tolerance: ±0.05) 0.9±0.1 2.8 4.5 0.8 (0.64) 3.0 1.35 0.9±0.1 0.77 0.39 .45 R2 1.35 R0 .1 4 0.44 0.24 0.3 Pivot center 0.9 Full stroke position 1.5 2.0 Operation point 2.6±0.2 Off position 2.9 0.45 0.3 (1) 3.0 0.9 0.4 3.5 1.6 0.8 R Pivot center (0.64) Off position 0.77 0.39 5 2.4 2–φ 0.7 0.44 0.24 R0 .1 4 Off position 0.5 0.2 0.5 0.2 PWB mounting hole for reference (Pitch tolerance: ±0.05) φ0.6±0.05 1.6±0.1 ■ Circuit Diagram Normal open type 1-pole 1-throw (N . O) Type ESE58L Type ESE58R Common Terminal C Common Terminal 1 Normal closed type 1-pole 1-throw (N . C) Type ESE58L C 1 1 C Terminal Type ESE58R Common Terminal C 1 Common ■ Packaging Specifications Standard Reel Dimensions in mm (not to scale) Taping Reel φ380.0±2.0 Embossed Carrier Taping 16.4 P=8.0±0.1 4.0±0.1 2.0±0.1 Pilot holes Drawing direction TOP Leading portion 400 mm min. 7.5±0.1 1.75±0.1 13.5 16.0±0.3 .1 +0 0 .5 φ1 END Carrier tape Non-packed portion (160 mm min.) Packed portion Non-packed portion (100 mm min.) Cover tape Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – ES27 – 00 Oct. 2012