DATASHEET Rev. A DTEM1036 SERIES 100~240VAC Input Voltage Range C14, C8, and C6 AC Inlet Connector Types 15~36 Watts, Single Outputs Medical AC/DC Desktop Power Supplies IEC-320-C14 IEC-320-C8 IEC-320-C6 FEATURES Single Outputs 100~240VAC Input Voltage Range CEC/Energy Star Level IV Compliant C14, C8, and C6 AC Inlet Connectors Available RoHS & WEEE Compliant Dimensions: 3.86” x 1.77” x 1.22” Short Circuit and Over Voltage Protection UL60601-1 Medical Approvals MTBF: > 30,000 Hours Optional Output Connectors Available DESCRIPTION The DTEM1036 series of medical AC/DC desktop power supplies provides up to 36 Watts of continuous output power in a 3.86” x 1.77” x 1.22” package. This series consists of single output models with a wide input voltage range of 100~240VAC. The DTEM1036 series is RoHS, WEEE, and CEC/Energy Star Level IV compliant and has UL60601-1 medical approvals. These models are also protected against over voltage and short circuit conditions. This series has three AC inlet connector types available: IEC-320-C14, IEC-320-C8, and IEC-320-C6. Please call factory for ordering details. 05/24/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 1 of 4 DTEM1036 Series C14, C8, & C6 Inlet Types 15~36 Watts, Single Outputs Medical AC/DC Desktop Power Supplies Rev. A SPECIFICATIONS: DTEM1036 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION INPUT SPECIFICATIONS Input Voltage Range Input Frequency Input Current Inrush Current OUTPUT SPECIFICATIONS Output Voltage (See Note 2) Line Regulation TEST CONDITIONS Min Max Unit 100 240 VAC 50 60 Hz 1.0 A 60 A See Table defined by changing ±10% of input voltage from nominal line and rated load. Load Regulation -1 +1 % -5 +5 % Output Current See Table Minimum Load 0 A Output Power Ripple & Noise Typ See Table Measured at nominal line and full load with 20MHz limited bandwidth and 0.1µF ceramic and 47µF aluminum capacitors in parallel across the output. 240 Hold-up Time mVp-p 8.3 ms Turn-on Time 3 s PROTECTION Over Voltage Protection Automatic recovery Short Circuit Protection Automatic recovery GENERAL SPECIFICATIONS Efficiency (typical) 82 % ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Storage Humidity MTBF 0 50 °C -20 85 °C 5 95 % 30,000 hours PHYSICAL SPECIFICATIONS 3.86 x 1.77 x 1.22 inches (98 x 45 x 31 mm) IEC-320-C14, C8, and C6 Dimensions (L x W x H) AC Inlet Connector (See Note 1) Weight 7.76oz (220g) SAFETY & EMC Safety Standards Compliance 05/24/2012 UL60601-1 RoHS, WEEE, CEC/Energy Star Level IV Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 2 of 4 DTEM1036 Series C14, C8, & C6 Inlet Types 15~36 Watts, Single Outputs Medical AC/DC Desktop Power Supplies Rev. A MODEL SELECTION TABLE Model Number (1) Input Voltage Range Output Voltage (2) Output Current Min Max Maximum Output Power DTEM1036A1 9 ~ 15 VDC 0A 3A 36W DTEM1036B1 9 ~ 15 VDC 0A 2.5A 30W 9 ~ 15 VDC 0A 2A 24W DTEM1036D1 9 ~ 15 VDC 0A 1.5A 18W DTEM1036E1 9 ~ 15 VDC 0A 1A 15W DTEM1036A2 9 ~ 15 VDC 0A 3A 36W DTEM1036B2 9 ~ 15 VDC 0A 2.5A 30W 9 ~ 15 VDC 0A 2A 24W DTEM1036D2 9 ~ 15 VDC 0A 1.5A 18W DTEM1036E2 9 ~ 15 VDC 0A 1A 15W DTEM1036A3 9 ~ 15 VDC 0A 3A 36W DTEM1036B3 9 ~ 15 VDC 0A 2.5A 30W 9 ~ 15 VDC 0A 2A 24W DTEM1036D3 9 ~ 15 VDC 0A 1.5A 18W DTEM1036E3 9 ~ 15 VDC 0A 1A 15W DTEM1036C1 DTEM1036C2 DTEM1036C3 100 ~ 240 VAC 100 ~ 240 VAC 100 ~ 240 VAC AC Inlet Type IEC-320-C14 IEC-320-C8 IEC-320-C6 NOTES 1. The number in red represents the type of AC inlet connector: “1” for IEC-320-C14 type, “2” for IEC-320-C8 type, and “3” for IEC-320-C6 type. 2. The output voltage is specified as a range (Ex: 9~15VDC); the customer must specify what they want the voltage set at. 3. Ripple and Noise is measured at nominal line and full load with 20MHz limited bandwidth and a 0.1µF ceramic and 47µF aluminum capacitors in parallel on the output. 4. Optional output connectors are available. Please call factory for ordering details. 05/24/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 3 of 4 DTEM1036 Series C14, C8, & C6 Inlet Types 15~36 Watts, Single Outputs Medical AC/DC Desktop Power Supplies Rev. A MECHANICAL DRAWING Unit: inches (mm) 1.22±0.04 (31±1) IEC-320-C14 IEC-320-C8 1.22±0.04 (31±1) 1.22±0.04 (31±1) 1.77±0.04 (45±1) 1.22±0.04 (31±1) 3.86±0.04 (98±1) IEC-320-C6 COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 05/24/2012 (603)778-2300 (888)587-9255 (603)778-9797 [email protected] www.wallindustries.com 5 Watson Brook Rd. Exeter, NH 03833 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 4 of 4