DOMINANT Opto Technologies Innovating Illumination Mini DomiLED TM DATA SHEET: Mini DomiLEDTM AlInGaP : DNx-PJS TM Synonymous with function and performance, the Mini DomiLED series is perfectly suited for a variety of cross-industrial applications due to its small package outline, durability and superior brightness. TM Features: > > High brightness surface mount LED. 120° viewing angle. > > > > Small package outline (LxWxH) of 2.0 x 1.4 x 1.3mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Applications: > Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. > Exterior applications, eg: signal lighting, Center High Mounted Stop Ligh (CHMSL) > Signage: full color display video notice board, signage, special effect lighting > Lighting: channel light © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 06/08/2015 V7.0 DOMINANT TM AllnGaP : DNx-PJS Opto Technologies Innovating Illumination Optical Characteristics at Tj=25˚C Part Ordering Number Color Viewing Angle˚ Luminous Intensity @ IF = 20mA IV (mcd) Min. Typ. Max. DNR-PJS-VW1-1 Red, 620nm 120 715.00 1057.50 1400.00 DNA-PJS-V2W-1 Amber, 615nm 120 900.00 1350.00 1800.00 DNY-PJS-VW1-1 Yellow, 590nm 120 715.00 1057.50 1400.00 DNY-PJS-V2W-1 Yellow, 590nm 120 900.00 1350.00 1800.00 NOTE 1. All part number above comes in a quantity of 3000 units per reel. 2. Luminous intensity is measured with an accuracy of ± 11%. 3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. Electrical Characteristics at Tj=25˚C Vf @ If = 20mA Part Number Vr @ Ir = 10uA Min. (V) Typ. (V) Max. (V) 1.8 2.2 2.6 DNx-PJS Min. (V) 12 Forward voltage, Vf is measured with an accuracy of ± 0.1 V. Absolute Maximum Ratings Maximum Value Unit DC forward current 50 mA Peak pulse current; 100 mA 12 V ESD threshold (HBM) 2000 V LED junction temperature 125 ˚C Operating temperature -40 … +100 ˚C Storage temperature -40 … +100 ˚C 130 mW 480 K/W 230 K/W (tp ≤ 10µs, Duty cycle = 0.005) Reverse voltage Power dissipation (at room temperature) Thermal resistance - Junction / ambient, Rth JA - Junction / solder point, Rth JS (Mounting on FR4 PCB, pad size >= 16 mm2 per pad) 2 06/08/2015 V7.0 DOMINANT TM AllnGaP : DNx-PJS Opto Technologies Innovating Illumination Characteristics Symbol Temperature coefficient of dom (typ) IF = 20mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of VF (typ) IF = 20mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of IV (typ) TC dom (typ) TCV TCIV IF = 20mA; 0 ˚C <= T <= 100 ˚C Part Number Value Unit DNR-PJS 0.05 nm / K DNA-PJS DNY-PJS 0.06 DNR-PJS -2.2 DNA-PJS -2.0 DNY-PJS -1.9 DNR-PJS -0.5 DNA-PJS -0.7 DNY-PJS -0.9 0.08 mV / K %/K Wavelength Grouping at Tj=25˚C Color Group Wavelength distribution (nm) DNR; Red Full 620 - 630 DNA; Amber Full 610 - 621 W 610 - 615 X 615 - 621 Full 582 - 594 W 582 - 585 X 585 - 588 Y 588 - 591 Z 591 - 594 DNY; Yellow Dominant wavelength is measured with an accuracy of ± 1 nm. 3 06/08/2015 V7.0 DOMINANT TM AllnGaP : DNx-PJS Opto Technologies Innovating Illumination Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group V1 715.0...900.0 V2 900.0...1125.0 W1 1125.0...1400.0 W2 1400.0...1800.0 Vf Binning (Optional) Vf Bin @ 20mA Group Forward Wavelength Voltage (V) distribution (nm) VA 1.75 ... 1.90 VB 1.90 ...2.05 VC 2.05... 2.20 VD 2.20 ... 2.35 VE 2.35... 2.50 VF 2.50 ... 2.65 Forward voltage, Vf is measured with an accuracy of ± 0.1 V. 4 06/08/2015 V7.0 UNDER DEVELOPMENT DOMINANT Semiconductors PRELIMINARY DOMINANT TM AllnGaP : DNx-PJS DEVELOPMENT Opto Technologies UNDER Engineering reference data are not verified. The specifications are subject to s Innovating Illumination change without notice. Relative Intensity; Intensity, Normalized Normalized at Relative at 20mA 2mA Relative Intensity; Normalized at 50mA verified. The specifications are to Relative Luminous Intensity Vsvs. Forward Current Relative intensity forward current. Relative Intensity Vssubject Forward Current without notice. Relative Intensity Vs Forward Current Forward Current Vs Forward Voltage Forward current vs. forward voltage. Forward ForwardCurrent CurrentVsvsForward ForwardVoltage Voltage Intensity vs Current 2.2 6 35 30 70 1.2 Forward 2 current vs. forward voltage. 4 1.4 0.8 1.2 31 0.6 0.8 2 0.60.4 0.4 1 0.20.2 00 0 00 Forward Voltage; V Forward ForwardCurrent; Current,mA mA Forward Current, mA 1.6 3.00 1 Normalized IV @ 30mA 1.8 5 2.50 2.00 1.50 1.00 0.50 0.00 0 0 10 2 10 20 40 20 4 30 6 40 20 30 40 50 60 80 60 850 10 60 If 70(mA) 80 30 25 60 25 50 20 20 40 15 15 30 10 10 20 5 10 0 0 0 1.2 1.2 1.7 100 ForwardCurrent; Current, mA mA Forward Forward Forward Current, mA 100 20° 10° 40° 0.6 60° 0.4 Relative Relative Intensity Intensity Forward ForwardCurrent, Current,mA mA Forward Current, mA 50° 30 15 50 40 20 10 30 70° 10 5 20 10 00 0 00 0.2 80° 0 90°20 40 40 30 40 20 10 20 60 60 50 60 80 80 70 80 0 100 100 90 100 1 1 1 0.9 0.9 0.9 Yellow Orange 0.8 0.8 0.8 0.7 0.7 0.7 Yellow 0.6 0.6 0.6 0.5 0.5 0.5 0.4 0.4 0.4 0.3 0.3 0.3 0.2 0.2 0.2 0.1 0.1 0.1 0 0 0 500 600 500 550 600 650 500 550 600 Allowable ForwardCurrent Current ( mA ) Allowable Forward ( mA ) Amber Amber Red Super Red 700 700 650 Wavelength, nm nm Wavelength; Wavelength; nm AmbientIntensity Temperature Relative vs. Wavelength Ambient Temperature TBD Allowable Forward Current VsRatio Duty Ratio Allowable Forward Current Vs Duty ( Ta=25 Deg C, tp≤10uS ) ( Ta=25 Deg C, tp10uS ) 2.2 2.4 2.2 2.4 2.2 2.3 Forward Voltage, Forward Current; mA Forward Voltage; VV Forward Voltage; V Ambient Temperature DNx-PJS 22 2.1 Relative Intensity Intensity Vs Wavelength Wavelength Relative Relative IntensityVs Vs Wavelength 0.8 4070 20 60 1.8 1.8 2 0° 1.0 Maximum current vs. Maximum Current Vs Temperature Forward Current Vstemperature. Ambient Temperature Maximum Current Vs Ambient Temperature 50 25 80 1.6 1.6 1.9 Maximum current vs. temperature. Radiation pattern. 30° 1.4 1.4 1.8 750 700 800 800 750 Radiation Pattern 30° 1000 20° 10° 0° 1.0 40° 0.8 50° 0.6 60° 0.4 100 70° 0.2 80° 10 0.1 1 10 90° 100 0 Duty Ratio, % Duty Ratio, % 30/11/10 nGaP DNx-PJS - Catalogue-pv2 5 Mini DomiLED AlInGaP DNx-PJS - Catalogue-pv2 Page 6 of 9 06/08/2015 V7.0 Page 6 of 9 DOMINANT TM AllnGaP : DNx-PJS Opto Technologies Innovating Illumination Mini DomiLED • AllnGaP : DNx-PJS Package Outlines TM Notes: Primary thermal path is through Cathode lead of LED package Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Epoxy Soldering Leads Sn-Sn Plating 6 06/08/2015 V7.0 DOMINANT TM AllnGaP : DNx-PJS Opto Technologies Innovating Illumination Recommended Solder Pad 7 06/08/2015 V7.0 DOMINANT TM AllnGaP : DNx-PJS Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 3000 units. • Reel diameter is 180 mm. 8 06/08/2015 V7.0 DOMINANT TM AllnGaP : DNx-PJS Opto Technologies Innovating Illumination Packaging Specification 9 06/08/2015 V7.0 DOMINANT TM AllnGaP : DNx-PJS Opto Technologies Innovating Illumination Packaging Specification Existing BPL Moisture sensitivity level size - 87mm x 45mm. As part of improvement and also in response to customers’ request; BPL f Barcode label changed to the following. DOMINANT Opto Technologies (L) Lot No : lotno ML TEMP 2 260˚C RoHS Compliant (P) Part No : partno (C) Cust No : partno (Q) Quantity : quantity (G) Grouping : group (D) D/C : date code Made in Malaysia (S) S/N : serial no New BPL size - 110mm x 55mm. Additional information are now included in the label. 2D and 3D barc Reel implemented now for every data field. Label Moisture absorbent material + Moisture indicator Issue No : 1 The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Weight Weight(gram) (gram) Average 1pc Mini DomiLED 1 completed bag (3000pcs) 0.007 0.034 200 ± 10 190 10 Cardboard Box DOMINANT TM For Mini DomiLED Cardboard Box Size TM Dimensions (mm) Empty Box Weight (kg) Reel / Box Super Small 325 x 225 x 190 0.38 9 reels MAX Small 325 x 225 x 280 0.54 15 reels MAX Medium 570 x 440 x 230 1.46 60 reels MAX Large 570 x 440 x 460 1.92 120 reels MAX 10 06/08/2015 V7.0 DOMINANT TM AllnGaP : DNx-PJS Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 217˚C 225 Temperature (˚C) Ramp-up 3˚C/sec max. 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 11 06/08/2015 V7.0 DOMINANT TM AllnGaP : DNx-PJS Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - Initial Release 03 Mar 2011 3 Add Vf binning 25 Apr 2011 3 Typo error on Vf binning 05 May 2011 2, 3 Add thermal resistance, Add characteristic 07 May 2012 2 Add new partno: DNY-PJS-V2W-1 Add ESD threshold (HBM) 10 Jul 2014 5 Add graph: Allowable Forward Current Vs Duty Ratio 11 Nov 2014 5, 6, 10 Typo error on graph: Forward Current Vs Forward Voltage Add Notes in Package Outline Update Packaging Specification 06 Aug 2015 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 12 06/08/2015 V7.0 DOMINANT TM Opto Technologies AllnGaP : DNx-PJS Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd. Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM