Vectron OC-260-DJF-207AB-20 Oven controlled crystal oscillator Datasheet

8798_AA's Vectron
05/30/02
3:11 PM
Page 42
Oven Controlled Crystal Oscillators (OCXO’s)
OC-260 Series (CO-760)
Description:
The OC-260 Series OCXO offers excellent temperature stability
and aging in a 1” x 1” x 0.52” package.
Features:
•
•
•
•
•
•
Frequencies: 5, 10, 12.8, 13, 16.384, 19.44, 20, 20.48 MHz
Stabilities: As low as +1 x 10-8
Temperature Range: As wide as -40oC to +85oC
Package: 1.0” x 1.0” x 0.52”
Output: HCMOS, Sinewave
Supply Voltage: 5 Volts or 3.3 Volts
Performance Characteristics
Parameter
Characteristics
Standard Frequencies:
Package Size:
Supply Voltage:
Input Power (steady state):
Input Power (turn-on):
5.0, 10.0, 12.8, 13.0, 16.384, 19.44, 20.0, 20.48 MHz.
Available from 1 to 80 MHz.
25.7 x 25.7x 13.2 mm (1.0” x 1.0” x 0.52”)
C=5 Vdc ±5%
D=3.3 Vdc ±5% (HCMOS output only)
<1.5W @ +25oC (-20°C / +70°C)
<3W (-20°C/+70°C)
Output Type:
A: HCMOS
Output Level:
5 V: “0” <0.5 V, “1” >4.5 V
(HCMOS output)
Rise/Fall Time tr/tf:
Symmetry (Duty/Cycle):
Harmonics/subs:
Temperature Stability:
Aging:
J: Sinewave; +7 dBm into 50 ohm (+5V supply only)
3.3 V: “0” <0.3 V, “1” >3.0 V
<10 ns (10% - 90%, HCMOS)
50/50 +10% (@50% Vdd, HCMOS)
-20 dBc (for sinewave output)
B-208: ±2 x 10-8 over 0/50°C
B-107: ±1 x 10-7 over 0/50°C
D-408: ±4 x 10-8 over -20/70°C
D-107: ±1 x 10-7 over -20/70°C
F-107: ±1 x 10-7 over -40/85°C
F-207: ±2 x 10-7 over -40/85°C
Note: Tighter stability options are available - contact factory.
A: 1 x 10-8/day, 2x10-6/year
C: 1 x 10-9/day, 3x10-7/year
B: 3 x 10-9/day, 1x10-6/year
Short Term Stability (Allan Deviation): 5 x 10-11/second (with aging A or B)
1 x 10-11/second (with aging C)
Phase Noise:
(typical @ 10 MHz)
Frequency vs. Supply:
Electrical Frequency Adjust:
Mechanical Configuration:
-110 dBc/Hz @ 10 Hz
-130 dBc/Hz @ 100 Hz
-145 dBc/Hz @ 1 kHz
-150 dBc/Hz @ 10 kHz
-150 dBc/Hz @ 50 kHz
5 x 10-9/percent (with Aging A or B);
2 x 10-9/percent (with Aging C)
10 x 10-6 typical range (with Aging A or B)
2 x 10-6 typical range (with Aging C)
Pins for PCB mounting
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Web: www.vectron.com
42
8798_AA's Vectron
05/30/02
3:11 PM
Page 43
Oven Controlled Crystal Oscillators (OCXO’s)
OC-260 Series (CO-760)
Outline Drawing
13.20
(.52)
STANDOFFS
(4 PLACES)
.65
(.025)
.8 Dia
(.031)
5 Places
25.7 max.
(1.01)
4
3
.254
(.750 .010)
OCXO
0.25
(.010)
2.8
(.11)
12.1!
(.480)
19.05 .254
(.750 .010)
mm
(in.)
(1.01)
Pin Out Information
Pin
1
2
3
4
5
Function
Output
GND, Case
Electrical Frequency Adjustment Input
or N/C*
N/C or Reference Voltage Output*
Supply Voltage
Pin numbers are for reference only,
and may not appear on unit.
* custom part number to be assigned
Ordering Information
OC
260
C
A
D
107
C
A
20
MHz
Frequency
Product Family
OC = OCXO
Package
260 = 25.7x25.7 mm
Thru-hole
Supply Voltage
C = 5.0V ±5%
D = 3.3V ±5%
Output
A = HCMOS (100K // 10 pF Load)
J = Sinewave +7 dBm/50 ohm
(5.0V supply only)
1 - 80 MHz
Electrical Frequency Adjust
10 x 10-6 typical range (with Aging A or B)
2 x 10-6 typical range (with Aging C)
Aging
A = 1 x 10-8/day, 2 x 10-6/year
B = 3 x 10-9/day, 1 x 10-6/year
C = 1 x 10-9/day, 3 x 10-7/year
Temperature Stability*
B-107 = ±1x10-7 over 0°C to +50°C
B-208 = ±2x10-8 over 0°C to +50°C
D-107 = ±1x10-7 over -20°C to +70°C
D-408 = ±4x10-8 over -20°C to +70°C
F-207 = ±2x10-7 over -40°C to +85°C
F-107 = ±1x10-7 over -40°C to +85°C
*Other stability options are available upon request
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Web: www.vectron.com
43
Similar pages