1.6X0.8mm SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APT1608RWF/A WHITE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description The source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. Features 1.6mmX0.8mm SMT LED, 0.75mm THICKNESS. It is recommended to use a wrist band or anti-electrostatic LOW POWER CONSUMPTION. glove when handling the LEDs. W IDE VIEW ING ANGLE. All devices, equipment and machinery must be electrically IDEAL FOR BACKLIGHT AND INDICATOR. grounded. VARIOUS COLORS AND LENS TYPES AVAILABLE MOISTURE SENSITIVITY LEVEL : LEVEL 3. PACKAGE: 2000PCS / REEL . ELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V. TYP. COLOR TEMPERATURE:6500K COLOR COORDINATES:X=0.31,Y=0.31 ACC. TO CIE1931(WHITE). Applications traffic signaling. backlighting (illuminated advertising , general lighting). interior and exterior automotive lighting. OPTICAL EFFICIENCY: 7.9 lm/W(TYP.) COLOR REPRODUCTION INDEX:80 RoHS COMPLIANT. substitution of micro incandescent lamps. reading lamps. signal and symbol luminaire for orientation. marker lights (e.g. steps, exit ways, etc). decorative and entertainment lighting. indoor and outdoor commercial and residential Package Dimensions architectural lighting. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG3636 REV NO: V.5 DATE: JUN/05/2007 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1203005353 Selection Guide Note2 Dice Part No. APT1608RWF/A WHITE (InGaN) luminous Intensity Iv(mcd) @ 20 mA Lens Type Note3 v (mlm) @ 20 mA Viewing Note1 Angle Min. Typ. Typ. 2θ1/2 70 140 520 120° YELLOW FLUORESCENT Absolute Maximum Ratings at TA=25°C Parameter Symbol Value Unit Power dissipation Pt 120 mW Reverse Voltage VR 5 V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C IF 30 mA IFM 100 mA Rth JA Rth JS 400 150 °C/W DC Forward Current Peak Forward Current Note4 Thermal resistance Note5 Junction/ambient Junction/solder point Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size≥16 mm 2 per pad), Electrical / Optical Characteristics at TA=25°C Parameter Symbol Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] X Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Y Value Unit Note1 0.31 - Note1 0.31 - Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage 2.7 VF Note2 3.2 IF=20mA [Max.] Reverse Current (VR=5V) 4.0 [Typ.] 0.01 IR Reverse Current (VR=5V) V [Max.] 10 µA Temperature coefficient of x [Typ.] IF=20mA, -10°C T 100°C TC x -0.1 10-3 / °C Temperature coefficient of y [Typ.] IF=20mA, -10°C T 100°C TCy -0.2 10-3 / °C Temperature coefficient of VF IF=20mA, -10°C T 100°C [Typ.] TCV -2.5 mV/ °C Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ±0.1V. SPEC NO: DSAG3636 REV NO: V.5 DATE: JUN/05/2007 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1203005353 Brightness codes Note1 Note2 luminous Intensity Iv(mcd) @ 20 mA v (mlm) @ 20 mA Code. Min. Max. Typ. M 70 130 300 N 110 220 480 P 180 320 710 Q 280 420 960 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White APT1608RWF/A SPEC NO: DSAG3636 REV NO: V.5 DATE: JUN/05/2007 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1203005353 APT1608RWF/A SPEC NO: DSAG3636 REV NO: V.5 DATE: JUN/05/2007 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1203005353 APT1608RWF/A White CIE 0.44 0.42 0.40 c1 0.38 0.36 b4 c0 0.34 b1 b3 0.32 b2 0.30 a1 0.28 a0 0.26 0.24 0.22 0.22 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 a0 a1 X 0.264 0.283 0.296 0.280 X 0.248 0.275 0.283 0.264 Y 0.267 0.305 0.276 0.248 Y 0.286 0.321 0.305 0.267 Reference CCT: 14000~9000k Reference CCT: 14000~9000k b1 b2 X 0.283 0.330 0.330 0.287 X 0.287 0.330 0.330 0.296 Y 0.305 0.360 0.339 0.295 Y 0.295 0.339 0.318 0.276 Reference CCT: 9000~5600k Reference CCT: 9000~5600k b3 b4 X 0.275 0.298 0.306 0.283 X 0.298 0.321 0.330 0.306 Y 0.321 0.350 0.332 0.305 Y 0.350 0.379 0.360 0.332 Reference CCT: 9000~7000k Reference CCT: 7600~5600k c0 c1 X 0.330 0.361 0.356 0.330 X 0.321 0.366 0.361 0.330 Y 0.360 0.385 0.351 0.318 Y 0.379 0.419 0.385 0.360 Reference CCT: 5600~4600k Reference CCT: 6000~4600k SPEC NO: DSAG3636 REV NO: V.5 DATE: JUN/05/2007 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1203005353 APT1608RWF/A Recommended Soldering Pattern (Units: mm ; Tolerance: ± 0.1) Tape Specifications (Units : mm) Reel Dimension SPEC NO: DSAG3636 REV NO: V.5 DATE: JUN/05/2007 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1203005353 PACKING & LABEL SPECIFICATIONS APT1608RWF/A SPEC NO: DSAG3636 REV NO: V.5 DATE: JUN/05/2007 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1203005353