Data Sheet HD74LV1G32A R04DS0022EJ0800 Rev.8.00 Jan 10, 2014 2–input OR Gate Description The HD74LV1G32A has two–input OR gate in a 5 pin package. Low voltage and high-speed operation is suitable for the battery powered products (e.g., notebook computers), and the low power consumption extends the battery life. Features • The basic gate function is lined up as Renesas uni logic series. • Supplied on emboss taping for high-speed automatic mounting. • Electrical characteristics equivalent to the HD74LV32A Supply voltage range : 1.65 to 5.5 V Operating temperature range : –40 to +85°C • All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) All outputs VO (Max.) = 5.5 V (@VCC = 0 V) • Output current ±6 mA (@VCC = 3.0 V to 3.6 V), ±12 mA (@VCC = 4.5 V to 5.5 V) • All the logical input has hysteresis voltage for the slow transition. • Ordering Information Part Name Package Type HD74LV1G32ACME CMPAK–5 pin HD74LV1G32AVSE VSON–5 pin Note: Package Code (Previous Code) PTSP0005ZC-A (CMPAK-5V) PUSN0005KA-A (TNP-5DV) Package Abbreviation Taping Abbreviation (Quantity) CM E (3000 pcs/reel) VS E (3000 pcs/reel) Please consult the sales office for the above package availability. Outline and Article Indication • HD74LV1G32A Index band Marking L CMPAK–5 R04DS0022EJ0800 Rev.8.00 Jan 10, 2014 4 = Control code Page 1 of 8 HD74LV1G32A Outline and Article Indication • HD74LV1G32A Marking L 4 = Control code VSON–5 Function Table Inputs A L B L H L H L H H Output Y L H H H H : High level L : Low level Pin Arrangement IN B 1 IN A 2 GND 3 5 VCC 4 OUT Y (Top view) R04DS0022EJ0800 Rev.8.00 Jan 10, 2014 Page 2 of 8 HD74LV1G32A Absolute Maximum Ratings Item Supply voltage range Input voltage range *1 Symbol VCC VI Output voltage range *1, 2 VO Input clamp current Output clamp current Continuous output current IIK IOK IO Continuous current through VCC or GND Maximum power dissipation *3 at Ta = 25°C (in still air) Storage temperature Notes: Ratings –0.5 to 7.0 –0.5 to 7.0 –0.5 to VCC + 0.5 –0.5 to 7.0 –20 ±50 ±25 Unit V V ICC or IGND ±50 mA PT 200 mW –65 to 150 °C Tstg V mA mA mA Test Conditions Output : H or L VCC : OFF VI < 0 VO < 0 or VO > VCC VO = 0 to VCC The absolute maximum ratings are values, which must not individually be exceeded, and furthermore no two of which may be realized at the same time. 1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. This value is limited to 5.5 V maximum. 3. The maximum package power dissipation was calculated using a junction temperature of 150°C. Recommended Operating Conditions Item Supply voltage range Input voltage range Output voltage range Symbol VCC VI VO IOL Output current IOH Input transition rise or fall rate Δt / Δv Operating free-air temperature Ta Note: Min 1.65 0 0 — Max 5.5 5.5 VCC 1 — — — — 2 6 12 –1 — — — 0 –2 –6 –12 300 0 0 0 200 100 20 –40 85 Unit V V V mA ns / V Conditions VCC = 1.65 to 1.95 V VCC = 2.3 to 2.7 V VCC = 3.0 to 3.6 V VCC = 4.5 to 5.5 V VCC = 1.65 to 1.95 V VCC = 2.3 to 2.7 V VCC = 3.0 to 3.6 V VCC = 4.5 to 5.5 V VCC = 1.65 to 1.95 V VCC = 2.3 to 2.7 V VCC = 3.0 to 3.6 V VCC = 4.5 to 5.5 V °C Unused or floating inputs must be held high or low. R04DS0022EJ0800 Rev.8.00 Jan 10, 2014 Page 3 of 8 HD74LV1G32A Electrical Characteristics • Ta = –40 to 85°C Item Symbol VIH 1.65 to 1.95 2.3 to 2.7 3.0 to 3.6 4.5 to 5.5 Min VCC×0.75 VCC×0.7 VCC×0.7 VCC×0.7 Typ — — — — VIL 1.65 to 1.95 2.3 to 2.7 3.0 to 3.6 4.5 to 5.5 — — — — — — — — Max — — — — VCC×0.25 VCC×0.3 VCC×0.3 VCC×0.3 1.8 2.5 3.3 5.0 Min to Max 1.65 2.3 — — — — VCC–0.1 1.4 2.0 0.25 0.30 0.35 0.45 — — — — — — — — — — 3.0 4.5 2.48 3.8 — — — — — — — — — — — — — — — — 0.1 0.3 0.4 0.44 0.55 ±1 μA Input voltage Hysteresis voltage VH VOH Output voltage VCC (V) * Unit Test condition V V VT+ – VT– IOH = –50 μA IOH = –1 mA IOH = –2 mA V IOH = –6 mA IOH = –12 mA IOL = 50 μA IOL = 1 mA IOL = 2 mA IOL = 6 mA IOL = 12 mA VIN = 5.5 V or GND Input current IIN Min to Max 1.65 2.3 3.0 4.5 0 to 5.5 Quiescent supply current ICC 5.5 — — 10 μA VIN = VCC or GND, IO = 0 IOFF 0 — — 5 μA VIN or VO = 0 to 5.5 V CIN 3.3 — 2.5 — pF VIN = VCC or GND VOL Output leakage current Input capacitance Note: For conditions shown as Min or Max, use the appropriate values under recommended operating conditions. R04DS0022EJ0800 Rev.8.00 Jan 10, 2014 Page 4 of 8 HD74LV1G32A Switching Characteristics • VCC = 1.8 ± 0.15 V Item Propagation delay time Ta = 25°C Symbol tPLH tPHL Ta = –40 to 85°C Min Typ Max Min Max — 12.3 22.5 1.0 25.0 — 17.7 31.0 1.0 34.0 Unit ns Test Conditions CL = 15 pF CL = 50 pF FROM (Input) TO (Output) A or B Y FROM (Input) TO (Output) A or B Y FROM (Input) TO (Output) A or B Y FROM (Input) TO (Output) A or B Y • VCC = 2.5 ± 0.2 V Item Propagation delay time Ta = 25°C Symbol tPLH tPHL Ta = –40 to 85°C Min Typ Max Min Max — 7.1 12.8 1.0 15.0 — 9.6 16.2 1.0 19.0 Unit ns Test Conditions CL = 15 pF CL = 50 pF • VCC = 3.3 ± 0.3 V Item Propagation delay time Ta = 25°C Symbol tPLH tPHL Min Typ — — Ta = –40 to 85°C Max Min Max 5.0 7.9 1.0 9.5 6.9 11.4 1.0 13.0 Unit ns Test Conditions CL = 15 pF CL = 50 pF • VCC = 5.0 ± 0.5 V Item Propagation delay time Ta = 25°C Symbol tPLH tPHL Ta = –40 to 85°C Min Typ Max Min Max — 3.6 5.5 1.0 6.5 — 4.9 7.5 1.0 8.5 Unit ns Test Conditions CL = 15 pF CL = 50 pF Operating Characteristics • CL = 50 pF Item Power dissipation capacitance Symbol CPD R04DS0022EJ0800 Rev.8.00 Jan 10, 2014 VCC (V) Ta = 25°C Min Typ Max 3.3 — 9.5 — 5.0 — 11.5 — Unit pF Test Conditions f = 10 MHz Page 5 of 8 HD74LV1G32A Test Circuit VCC Input Pulse generator Output 50 Ω CL Note: CL includes probe and jig capacitance. Waveforms tr tf 90% Input VCC 90% 50% 50% 10% 10% GND VOH Output 50% t PLH 50% t PHL VOL Notes: 1. Input waveform : PRR ≤ 1 MHz, Zo = 50 Ω, tr ≤ 3 ns, tf ≤ 3 ns. 2. The output are measured one at a time with one transition per measurement. R04DS0022EJ0800 Rev.8.00 Jan 10, 2014 Page 6 of 8 HD74LV1G32A Package Dimensions JEITA Package Code RENESAS Code Previous Code MASS (Typ) [g] SC-88A PTSP0005ZC-A CMPAK-5 / CMPAK-5V 0.006 D A e Q c E HE LP L A A x M L1 S A A2 y S b c A-A Section A3 b A A1 S Reference Dimensions in millimeters Symbol Min Nom Max A A1 A2 A3 b c D E e HE L L1 LP x y Q 0.8 0 0.8 ⎯ 0.15 0.1 1.8 1.15 ⎯ 1.8 0.3 0.1 0.2 ⎯ ⎯ ⎯ ⎯ ⎯ 0.9 0.25 0.22 0.13 2.0 1.25 0.65 2.1 ⎯ ⎯ ⎯ ⎯ ⎯ 0.25 1.1 0.1 1.0 ⎯ 0.3 0.15 2.2 1.35 ⎯ 2.4 0.7 0.5 0.6 0.05 0.05 ⎯ © 2013 Renesas Electronics Corporation. All rights reserved. R04DS0022EJ0800 Rev.8.00 Jan 10, 2014 Page 7 of 8 HD74LV1G32A JEITA Package Code P-USON5-1.2x1.6-0.50 RENESAS Code PUSN0005KA-A Previous Code TNP-5D/TNP-5DV MASS[Typ.] 0.002g D L1 1.0 ±0.1 4 ( 0.1 ) HE E ( 0.1 ) 5 1 3 A c e R04DS0022EJ0800 Rev.8.00 Jan 10, 2014 b Reference Dimension in Millimeters Symbol D E A A1 A2 b b1 e Lp x y ZD c c1 HE L1 Min Nom Max 1.55 1.6 1.65 1.1 1.2 1.3 0.6 0.15 0.2 0.3 0.5 0.07 0.12 0.22 1.55 1.6 0.2 1.65 Page 8 of 8 Notice 1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 2. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics 3. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Renesas Electronics assumes no responsibility for any losses incurred by you or 5. Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". The recommended applications for each Renesas Electronics product depends on third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product. the product's quality grade, as indicated below. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc. Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by Renesas Electronics. 6. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. 8. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. 10. It is the responsibility of the buyer or distributor of Renesas Electronics products, who distributes, disposes of, or otherwise places the product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, Renesas Electronics assumes no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics products. 11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. http://www.renesas.com SALES OFFICES Refer to "http://www.renesas.com/" for the latest and detailed information. Renesas Electronics America Inc. 2880 Scott Boulevard Santa Clara, CA 95050-2554, U.S.A. Tel: +1-408-588-6000, Fax: +1-408-588-6130 Renesas Electronics Canada Limited 1101 Nicholson Road, Newmarket, Ontario L3Y 9C3, Canada Tel: +1-905-898-5441, Fax: +1-905-898-3220 Renesas Electronics Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K Tel: +44-1628-651-700, Fax: +44-1628-651-804 Renesas Electronics Europe GmbH Arcadiastrasse 10, 40472 Düsseldorf, Germany Tel: +49-211-65030, Fax: +49-211-6503-1327 Renesas Electronics (China) Co., Ltd. 7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China Tel: +86-10-8235-1155, Fax: +86-10-8235-7679 Renesas Electronics (Shanghai) Co., Ltd. Unit 301, Tower A, Central Towers, 555 LanGao Rd., Putuo District, Shanghai, China Tel: +86-21-2226-0888, Fax: +86-21-2226-0999 Renesas Electronics Hong Kong Limited Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong Tel: +852-2886-9318, Fax: +852 2886-9022/9044 Renesas Electronics Taiwan Co., Ltd. 13F, No. 363, Fu Shing North Road, Taipei, Taiwan Tel: +886-2-8175-9600, Fax: +886 2-8175-9670 Renesas Electronics Singapore Pte. Ltd. 80 Bendemeer Road, Unit #06-02 Hyflux Innovation Centre Singapore 339949 Tel: +65-6213-0200, Fax: +65-6213-0300 Renesas Electronics Malaysia Sdn.Bhd. Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: +60-3-7955-9390, Fax: +60-3-7955-9510 Renesas Electronics Korea Co., Ltd. 12F., 234 Teheran-ro, Gangnam-Gu, Seoul, 135-080, Korea Tel: +82-2-558-3737, Fax: +82-2-558-5141 © 2014 Renesas Electronics Corporation. All rights reserved. Colophon 3.0