4.5x2mm SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APD2520PBC/A03 BLUE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description 4.5x2mm SMT LED,0.5mm THICKNESS The Blue source color devices are made with InGaN on SiC LOW POWER CONSUMPTION. Light Emitting Diode. IDEAL FOR BACKLIGHT AND INDICATOR. Static electricity and surge damage the LEDS. VARIOUS COLORS AND LENS TYPES AVAILABLE. It is recommended to use a wrist band or anti-electrostatic PACKAGE : 1000PCS/REEL. glove when handling the LEDs. MOISTURE SENSITIVITY LEVEL : LEVEL 3. All devices, equipment and machinery must be electrically RoHS COMPLIANT. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAG5703 REV NO: V.1 APPROVED: J. Lu CHECKED: Allen Liu DATE: JUN/17/2006 DRAWN: Y.L.LI PAGE: 1 OF 5 ERP:1203004747 Selection Guide Dice Part No. APD2520PBC/A03 Iv (mcd) [2] @ 20mA Lens Type BLUE (InGaN) Viewing Angle [1] Min. Typ. 2θ1/2 70 200 20° WATER CLEAR Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue λD [1] Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.3 3.8 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 114 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG5703 REV NO: V.1 APPROVED: J. Lu CHECKED: Allen Liu DATE: JUN/17/2006 DRAWN: Y.L.LI PAGE: 2 OF 5 ERP:1203004747 Blue APD2520PBC/A03 SPEC NO: DSAG5703 REV NO: V.1 APPROVED: J. Lu CHECKED: Allen Liu DATE: JUN/17/2006 DRAWN: Y.L.LI PAGE: 3 OF 5 ERP:1203004747 APD2520PBC/A03 Recommended Soldering Pattern (Units : mm;Tolerance:± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG5703 REV NO: V.1 APPROVED: J. Lu CHECKED: Allen Liu DATE: JUN/17/2006 DRAWN: Y.L.LI PAGE: 4 OF 5 ERP:1203004747 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAG5703 REV NO: V.1 APPROVED: J. Lu CHECKED: Allen Liu APD2520PBC/A03 DATE: JUN/17/2006 DRAWN: Y.L.LI PAGE: 5 OF 5 ERP:1203004747