BCD AH9248NTR-G1 High sensitivity micropower omnipolar hall-effect switch Datasheet

Product Brief
High Sensitivity Micropower Omnipolar Hall-Effect Switch
Description
AH9248
Parametric Table
The AH9248 is an ultra-sensitive Hall-effect
switch with digital latched output, mainly designed
for battery-operation, hand-held equipments.
Supply Voltage (V)
Special CMOS process is used for low-voltage and
low-power requirement. A chopper stabilized
amplifier improves stability of magnetic switch
points. A sleep-awake logic controls the IC in
sleep time or awake time. This function will
reduce the average operating current of the IC.
During the awake time, the output is changed with
the magnetic flux density. During the sleep time,
the output is latched in its previous state and the
current consumption will reduce to some µA.
The IC switching behaviour is omnipolar, either
north or south pole sufficient strength will turn the
output on. If the magnetic flux density is larger
than operating point (BOP), the output will be
turned on; if it is less than releasing point (BRP),
the output will be turned off.
2.5 to 5.5
Supply Current (Average) (µA)
10
Output Saturation Voltage
(VCC=3V, IOUT=1mA) (V) (Max)
0.4
Operating Point (Gauss)
±30
Releasing Point (Gauss)
±20
Hysteresis (Gauss)
10
Benefits
•
•
•
The AH9248 is available in TO-92S-3, SOT-23-3
and DFN-2×2-3 packages which are optimized for
most applications.
•
•
Low Average Current (8µA Typ.)
High Sensitivity
High Stability of the Magnetic Switching
Points
Operation Low to 2.5V
Cost-effect Solution
Features
•
•
•
•
•
•
•
Micropower Operation
2.5 to 5.5V Power Supply
Switching for Both Poles of a Magnet
(Omnipolar)
Stabilized Chopper
Superior Temperature Stability
Digital Output Signal
Built-in Pull-up Resistor (AH9249)
Additional Available Materials
•
•
•
•
Samples
Preliminary Datasheet
Reliability Report
ESD Report
Applications
•
•
•
Cover Switch in Notebook PC/PDA
Handheld Wireless Application Awake
Switch
Magnet Switch in Low Duty Cycle
Applications
May. 2010
BCD Semiconductor Manufacturing Limited
1
Product Brief
High Sensitivity Micropower Omnipolar Hall-Effect Switch
AH9248
Pin Configuration
OUTPUT
2
GND
1
VCC
2
3
OUTPUT
1
SOT-23-3
VCC
3
TO-92S-3
GND
(Front View)
(Top View)
Pin 1 Dot
by Marking
VCC
DFN-2×2-3
1
3
OUTPUT
GND
2
(Top View)
Ordering Information Example
Package
Temperature Range
Part Number
Marking ID
Packing Type
AH9248Z3-G1
9248
Bulk
AH9248Z3TR-G1
9248
Ammo
AH9248NTR-G1
GL1
Tape & Reel
AH9248DNTR-G1
JA
Tape & Reel
TO-92S-3
-40 to 85°C
SOT-23-3
DFN-2×2-3
Detailed information please refer to the relevant datasheet.
Sales Office:
Shanghai
No. 1600, Zi Xing Road, Shanghai ZiZhu Science-based
Industrial Park, 200241, China
Tel : 86-21-24162266
Fax : 86-21-24162277
USA
30920 Huntwood Ave. Hayward, CA 94544,
USA
Tel : +1-510-324-2988
Fax : +1-510-324-2788
Taiwan
4F, 298-1 Rui Guang Road, Nei-Hu District, Taipei,
Taiwan
Tel : 886-2-2656-2808
Fax : 886-2-2656-2806
Shenzhen
Unit A Room 1203, Skyworth Bldg., Gaoxin Ave.1.S.,
Nanshan District, Shenzhen, China
Tel : 86-755-8826 7951
Fax : 86-755-8826 7865
May. 2010
BCD Semiconductor Manufacturing Limited
2
Similar pages