Continental Device India Limited An ISO/TS 16949, ISO 9001 and ISO 14001 Certified Company SILICON PLANAR EPITAXIAL TRANSISTORS C100 D100 PNP NPN TO-92 Plastic Package C BE These are complementary transistors for medium power voltage and current amplifier applications. ABSOLUTE MAXIMUM RATINGS (Ta=25ºC Unless Specified Otherwise) VALUE DESCRIPTION SYMBOL VCBO 60 Collector Base Voltage V 50 Collector Emitter Voltage CER Emitter Base Voltage Collector Current Continuous Power Dissipation @ Ta=25ºC Power Dissipation @ Tc=25ºC Operating And Storage Junction Temperature Range THERMAL CHARACTERISTICS Thermal Resistance Junction-toAmbient Thermal Resistance Junction-to-Case V VEBO 5 V IC 1 A PD 500 800 mW Tj, Tstg -55 to +150 Rth(j-a) 250 o C/W Rth(j-c) 156.3 o C/W ELECTRICAL CHARACTERISTICS (Ta=25ºC Unless Specified Otherwise) DESCRIPTION SYMBOL TEST CONDITION VCBO IC=100µA,IE=0 Collector Base Voltage * IC=10mA,RBE=1KΩ Collector Emitter Voltage VCER VEBO IE=100µA, IC=0 Emitter Base Voltage Collector Cut off Current ICBO VCB=40V, IE = 0 Emitter Cut off Current IEBO VBE=4V, IC = 0 DC Current Gain UNITS V * VCE=1V, IC=150mA hFE VCE(sat)* IC=150mA, IB=15mA Collector-Emitter Saturation Voltage VBE(on)* IC=150mA, VCE=1V Base-Emitter ON Voltage *Pulse Condition: Pulse Width < 300us, Duty Cycle < 2%. MIN 60 ºC MAX UNITS V 50 V 5 V 50 50 nA 25 nA 280 0.6 0.9 V V C100_D100 Rev_1 301104D Continental Device India Limited Data Sheet Page 1 of 4 C100 D100 PNP NPN TO-92 Plastic Package TO-92 Plastic Package DIM A B C D A Uncontrolled Dimension With 'L' B D K 3 E Beyond 'L' 2 D SEC AA A A MAX. 5.33 5.20 4.19 0.55 0.35 0.50 E F 5 DEG G 1.14 1.40 1.20 1.40 H 12.70 K — 1.982 2.082 L M 1.03 1.20 All dimensions are in mm L Solderability Ensured 1 MIN. 4.32 4.45 3.18 0.41 G F C 3 2 1 H M F Mold Parting Line PIN CONFIGURATION 1. EMITTER 2. BASE 3. COLLECTOR 3 2 1 The TO-92 Package , Tape and Ammo Pack drawings are correct as on the date of issue/revision of this Data Sheet. The currently valild dimensions and information, may please be confirmed from the TO-92 Drawing in the Packages and Packing Section of the Product Catalogue. P a c k i n g D e t a i l s PACKAGE STANDARD PACK INNER CARTON BOX OUTER CARTON BOX Details Net Weight/Qty Size Qty Size Qty Gr Wt TO-92 Bulk 1K/polybag 200 gm/1K pcs 3" x 7.5" x 7.5" 5K 17" x 15" x 13.5" 80K 23 kgs TO-92 T&A 2K/ammo box 645 gm/2K pcs 12.5" x 8" x 1.8" 2K 17" x 15" x 13.5" 32K 12.5 kgs C100_D100 Rev_1 301104D Continental Device India Limited Data Sheet Page 2 of 4 C100 D100 PNP NPN TO-92 Plastic Package TO-92 Tape and Ammo Pack Tape Mechanical Data h (p) P T h h1 Ammo Pack Style Adhesive Tape on Top Side h1 A1 D FEE Flat side A H3 H2 Label C1 H1 Ho 186 (7.3") W2 C2 Wo L Carrier Strip W1 W F1 F2 Do 332 F t1 (1. 43 7" ) P2 t Po (1 3 ") Flat Side of Transistor and Adhesive Tape Visible 2000 pcs./Ammo Pack All dimensions are in mm ITEM BODY WIDTH BODY HEIGHT BODY THICKNESS PITCH OF COMPONENT * 1 FEED HOLE PITCH * 2 FEED HOLE CENTRE TO COMPONENT CENTRE DISTANCE BETWEEN OUTER LEADS * 3 COMPONENT ALIGNMENT SIDE VIEW * 4 COMPONENT ALIGNMENT FRONT VIEW TAPE WIDTH HOLD-DOWN TAPE WIDTH HOLE POSITION HOLD-DOWN TAPE POSITION LEAD WIRE CLINCH HEIGHT COMPONENT HEIGHT LENGTH OF SNIPPED LEADS FEED HOLE DIAMETER * 5 TOTAL TAPE THICKNESS LEAD - TO - LEAD DISTANCE STAND OFF CLINCH HEIGHT LEAD PARALLELISM PULL - OUT FORCE SPECIFICATION SYMBOL A1 A T P Po MIN. NOM. MAX. 4.0 4.8 3.9 TOL . NOTES 4.8 5.2 4.2 1. Maximum alignment deviation between leads will not to be greater than 0.2mm. 12.7 12.7 ± 1.0 ± 0.3 2. Maximum non-cumulative variation between tape feed holes shall not exceed 1 mm in 20 pitches. P2 6.35 ± 0.4 F 5.08 + 0.6 - 0.2 3. Holddown tape will not exceed beyond the edge(s) of carrier tape and there shall be no exposure of adhesive. h h1 W Wo W1 0 0 18 6 9 W2 Ho H1 L Do t F1, F2 0.5 16 H2 H3 | C1 - C2 | (p) 1.0 1.3 ± 0.5 ± 0.2 + 0.7 - 0.5 4. There will be no more than three (3) consecutive missing components in a tape. 5. A tape trailer, having at least three feed holes are provided after the last component in a tape. ± 0.2 ± 0.5 6. Splices should not interfere with the sprocket feed holes. ± 0.2 REMARKS 23.25 11.0 4 1.2 2.54 0.45 6N 1.45 3.0 0.22 + 0.4 - 0.1 * 1 Cumulative pitch error 1.0 mm/20 pitch * 2 To be measured at bottom of clinch * 3 At top of body * 4 At top of body * 5 t1 0.3 – 0.6 mm C100_D100 Rev_1 301104D Continental Device India Limited Data Sheet Page 3 of 4 Customer Notes C100 D100 PNP NPN TO-92 Plastic Package Disclaimer The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished in the Data Sheet and on the CDIL Web Site/CD are believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Discrete Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-2579 6150, 5141 1112 Fax + 91-11-2579 5290, 5141 1119 e-mail [email protected] www.cdilsemi.com C100_D100 Rev_1 301104D Continental Device India Limited Data Sheet Page 4 of 4