A-XMD Series 1KV ISOLATED 1W UNREGULATED DUAL OUTPUT DIP8 DC⁄DC Converter SELECTION GUIDE Model FEATURES ◆ Input 5, 12 and 24 VDC INPUT VOLTAGE (V) OUTPUT VOLTAGE (V) ISOIATION (VDC) MAX CAPACTIVE Load EFFICIEN CY (% ) ±3.3 OUTPUT CURRENT MAX (mA) ±150 A0503XMD 4.5-5.5 A0505XMD 4.5-5.5 1000 ±100 63 ±5 ±100 1000 ±100 A0507XMD 72 4.5-5.5 ±7.2 ±70 1000 ±100 75 A0509XMD 4.5-5.5 ±9 ±55 1000 ±100 78 A0512XMD 4.5-5.5 ±12 ±42 1000 ±100 80 A1515XMD 4.5-5.5 ±15 ±34 1000 ±100 80 A0518XMD 4.5-5.5 ±18 ±28 1000 ±100 78 A0524XMD 4.5-5.5 ±24 ±21 1000 ±100 78 10.8-13.2 ±3.3 ±150 1000 ±100 70 ◆ Output 3.3, 5, 7.2,9,12, 15, 18&24VDC A1203XMD A1205XMD 10.8-13.2 ±5 ±100 1000 ±100 72 ◆ Typical at +25°C, nominal input voltage, rated A1207XMD 10.8-13.2 ±7.2 ±70 1000 ±100 71 A1209XMD 10.8-13.2 ±9 ±55 1000 ±100 76 A1212XMD 10.8-13.2 ±12 ±42 1000 ±100 80 A1215XMD 10.8-13.2 ±15 ±34 1000 ±100 80 A1218XMD 10.8-13.2 ±18 ±28 1000 ±100 76 A1224XMD 10.8-13.2 ±24 ±21 1000 ±100 78 A2403XMD 21.6-26.4 ±3.3 ±150 1000 ±100 76 A2405XMD 21.6-26.4 ±5 ±100 1000 ±100 72 A2407XMD 21.6-26.4 ±7.2 ±70 1000 ±100 73 No external component required A2409XMD 21.6-26.4 ±9 ±55 1000 ±100 77 MTBF>1,000,000 hours A2412XMD 21.6-26.4 ±12 ±42 1000 ±100 82 A2415XMD 21.6-26.4 ±15 ±34 1000 ±100 82 A2418XMD 21.6-26.4 ±18 ±28 1000 ±100 75 A2424XMD 21.6-26.4 ±24 ±21 1000 ±100 80 output current unless otherwise specified ◆ DIP8 package Operating Temperature: -40℃～﹢85℃ ◆ 1000VDC Isolation ◆ Short circuit protection(automatic recovery) ◆ ◆ ◆ RoHS Compliance ◆ MODEL SELECTION ① ② ③ ④ A 05 05 X MD Input Specifications ⑤ Voltage range ①Product Series ②Input Voltage ③Output Voltage ④Fixed Input ⑤MINI DIP8 Package ±10 % Filter Capacitors Isolation Specifications Rated voltage 1000 VDC Leakage current 1 mA 109Ohm Resistance Capacitance APPLICATIONS 60 pF typ. Output Specifications The A-XMD series are specially designed for applications where a group of polar power supplies are isolated from the input power supply in a distributed power supply system on a circuit board. These products apply to: 1) where the voltage of the input power supply is fixed (voltage variation ≤±10%); 2) where isolation is necessary between input and output (isolation voltage ≤1000VDC); 3) where the regulation of the output voltage and the output ripple noise are not demanded. Voltage accuracy Ripple and noise (at 20 MHz BW) ±5 %, max. 100 mV p-p, max. Short circuit protection Line voltage regulation Momentary ±1,2 % / 1,0 % of Vin Load voltage regulation ±8 %, load = 20 ~ 100 % Temperature coefficient ±0,02 % / °C General Specifications Efficiency 75 % to 85 % Switching frequency 80 KHz, typ. Environmental Specifications Operating temperature (ambient) Storage temperature - 40° C to + 85° C - 55 °C to + 125 °C Derating See graph Humidity Up to 90 %, non condensing Cooling Free air convection Physical Characteristics MICRODC R ESERVES THE COPYRIGHT Dimensions DIP8 12,7 X 10,16 x 6,85 mm 0,5 x 0,4 x 0,24 inches Weight Case material http://www.microdc.cn . 1,8 g Non conductive black plastic Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 1 of 2 A-XMD Series TUBE OUTLINE DIMENSIONS Dimensions Note: Unit :mm[inch] Unit:mm[inch] General tolerances: ±0.50mm[±0.020inch] Pin section tolerances:±0.10mm[±0.004inch] L=530mm[20.866inch]Devices per tube: 40pcs General tolerances:±0.25mm[±0.010inch] L=220mm[8.661inch] Devices per tube: 16pcs RECOMMENDED FOOTPRINT MECHANICAL DIMENSIONS PIN CONNECTIONS Note: grid 2.54*2.54mm PIN DUAL 1 4 5 6 7 8 -Vin +Vin +Vout Omitted Common -Vout RoHS COMPLIANT INFORMATION Microdc Professional Power Module,Inc. Tel:0086-20-86000646 E-mail:[email protected] Website:http://www.microdc.cn This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300°C for 10 seconds. The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Tin with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in this series are backward compatible with Sn/Pb soldering systems. REACH COMPLIANT INFORMATION This series has proven that this product does not contain harmful chemicals, it also has harmful chemical substances through the registration, inspection and approval. http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 2 of 2