AZETTLER AZ9402-1A-9DS 10 amp miniature power relay Datasheet

AZ9402
10 AMP MINIATURE
POWER RELAY
FEATURES
•
•
•
•
•
10 Amp switching capability
SPST-N.O. and SPDT configurations
Epoxy sealed version available
UL, CUR E44211
TUV pending
GENERAL DATA
CONTACTS
Arrangement
Ratings
SPST N.O. (1 Form A)
SPDT (1 Form C)
Resistive load:
Max. switched power: 150 W or 1250 VA N.O.
Max. switched current:10 A
Max. switched voltage: 30 VDC* or 277 VAC
*Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
UL, CUR
5A at 250 VAC
10A at 125 VAC
4.2A at 277 VAC
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 10 A 120 VAC Res.
Operate Time (max.)
8 ms at nominal coil voltage
Release Time (max.)
5 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
1000 Vrms contact to contact
(at sea level for 1 min.) 4000 Vrms contact to coil
Insulation Resistance
1 x 109 ohms minimum at 500 VDC
Dropout
Greater than 5% of nominal coil voltage
Ambient Temperature
Operating
At nominal coil voltage
-40°C (-40°F) to 70°C (158°F)
1/4 HP at 120/240/277 VAC
Storage
TV- 5 at 120 VAC
Pilot Duty at 24 VA, 24 VAC ;125 VA at
Vibration
-40°C (-40°F) to 130°C (266°F)
0.062" DA at 10–55 Hz
Shock
120/240/277 VAC ; C150 at 120 VAC
Mechanical
TUV
5A at 250 VAC
5A at 28 VDC
Material
Resistance
100 g for 11 ms 1/2 sine pulse
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
7 grams
Silver Nickel
< 0.1 Ohm
(24 V, 1 A voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
253 mW (Standard Coil)
113 mW (Sensitive Coil)
Max. Continuous
Dissipation
1.25 W at 20°C (68°F)
Temperature Rise
40°C (72°F) (Standard Coil)
20°C (36°F) (Sensitive Coil)
1. All values at 20°C (68°F).
Max. 105°C (221°F)
3. Specifications subject to change without notice.
Temperature
NOTES
2. Relay may pull in with less than “Must Operate” value.
4/02/09W
AZ9402
RELAY ORDERING DATA
ORDER NUMBER*
COIL SPECIFICATIONS – Standard Coil (SPDT and SPST)
Nominal Coil
VDC
3
Must Operate
VDC
2.25
Max. Continuous
VDC
3.3
Coil Resistance
± 10%
20
SPDT
SPST-NO
AZ9402–1A–3D
AZ9402-1C-3D
5
3.75
5.5
56
AZ9402–1A–5D
AZ9402-1C-5D
6
4.5
6.6
80
AZ9402–1A–6D
AZ9402-1C-6D
AZ9402-1C-9D
9
6.75
9.9
180
AZ9402–1A–9D
12
9.0
13.2
320
AZ9402–1A–12D
AZ9402-1C-12D
18
13.5
19.8
720
AZ9402–1A–18D
AZ9402-1C-18D
24
18.0
26.4
1280
AZ9402–1A–24D
AZ9402-1C-24D
*Add suffix “E” for sealed version
ORDER NUMBER**
COIL SPECIFICATIONS – Sensitive Coil (SPST)
Nominal Coil
VDC
3
Must Operate
VDC
2.25
Max. Continuous
VDC
3.3
Coil Resistance
± 10%
45
Unsealed
Sealed
AZ9402–1A–3DS
AZ9402-1A-3DSE
5
3.75
5.5
125
AZ9402–1A–5DS
AZ9402-1A-5DSE
6
4.5
6.6
180
AZ9402–1A–6DS
AZ9402-1A-6DSE
9
6.75
9.9
405
AZ9402–1A–9DS
AZ9402-1A-9DSE
12
9.0
13.2
720
AZ9402–1A–12DS
AZ9402-1A-12DSE
18
13.5
19.8
1620
AZ9402–1A–18DS
AZ9402-1A-18DSE
24
18.0
26.4
2880
AZ9402–1A–24DS
AZ9402-1A-24DSE
MECHANICAL DATA
PC BOARD LAYOUT
.807 max.
[20.50]
.417 max.
[10.59]
.054
[1.36]
.400
[10.16]
.300
[7.62]
.058
[1.49]
.300
[7.62]
*
.614 max.
[15.60]
.016
[0.40]
5 x ø.051
[ø1.3]
.100
[2.54]
*omitted from Form A
5 x.150
[3.8]
WIRING DIAGRAM
FORM A
5 x.031
[0.8]
5 x.012±.005
[0.31±0.12]
FORM C
VIEWED TOWARD TERMINALS
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
4/2/09W
Similar pages